Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Nominal Input Trigger Current: .75 mA; No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
QUARKTWIN TECHNOLOGY LTD
Corphita
Supply Digital
Optocoupler Trigger Device Outputs FOD4216T attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
FOD4216T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Diotec Semiconductor Ag
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
FOD4108SV
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; Maximum Isolation Voltage: 5000 V; Minimum Peak Off-state Voltage: 800 V; Configuration: SINGLE;
MOC3162M
Onsemi's MOC3162M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -40 to 85°C, it offers 600V repetitive off-state voltage and 4170V isolation for triggering devices in various applications.
MOC3041SVM
MOC3041SVM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, it operates b/w -40 to 85°C and features a surface mounting feature.
FOD4208S
The Onsemi FOD4208S is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL420-X009T
Siemens
TRIAC OUTPUT OPTOCOUPLER; Maximum On State Current: .3 A; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; No. of Elements: 1; Maximum Isolation Voltage: 5300 V;
IL4108-X006
Vishay Intertechnology
IL4108-X006 by Vishay Intertechnology is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55°C to 100°C, with a max isolation voltage of 5300V. Ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
MOC3023S
Motorola
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Maximum Forward Current: .06 A;
FOD410SV
FOD410SV by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 3A peak surge current. It operates b/w -55°C to 100°C, with 600V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 5000V, such as industrial controls and power supplies.
VOM160NT
Vishay Intertechnology's VOM160NT is a TRIAC output optocoupler with 1A peak surge current, 600V repetitive off-state voltage, and 3750V isolation voltage. Ideal for applications requiring surface mounting feature, it operates b/w -40°C to 100°C and has a max on-state current of 0.07A.
MOC3063SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Reverse Leakage Current: .0001 A; Minimum Operating Temperature: -40 Cel;
MOC3032SVM
The Onsemi MOC3032SVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating b/w -40 to 85 °C, it offers 250V repetitive off-state voltage for applications requiring high isolation voltage up to 4170V. Ideal for surface mount setups, it comes in tube packaging.
MOC3022SR2M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Repetitive Off-state Voltage (Peak): 400 V; Peak Surge Current: 1 A;
MOC3033SVM
The Onsemi MOC3033SVM is a single optocoupler with a max forward current of 0.06A and min peak off-state voltage of 250V. It operates b/w -40 to 85 °C, with an isolation voltage of 7500V, making it ideal for triggering devices in various applications.
BRT22H-X007
TRIGGER OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .3 A; No. of Elements: 1; Additional Features: UL RECOGNIZED;
ASO242
Crydom
The Crydom ASO242 is a SINGLE SCR OUTPUT OPTOCOUPLER with 2500V isolation voltage. It operates b/w -30°C to 80°C, making it suitable for various trigger device output applications. Terminal finish is Tin (Sn) with Nickel (Ni) barrier for enhanced durability and performance.
MOC3023
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .05 A;
MOC3021VM
The Onsemi MOC3021VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3021
Isocom Components
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Nominal Input Trigger Current: 30 mA; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel;
FODM3011R2V
FODM3011R2V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
FOD4118TV
FOD4118TV by Onsemi is a single TRIAC output optocoupler with zero cross voltage. It has a max on-state voltage of 3V, peak surge current of 3A, and max forward current of 0.03A. Ideal for applications requiring high isolation voltage up to 5000V and operating temperatures ranging from -55 °C to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved