Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ANODE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Controlled Rectifiers (SCR) T340F10ENB attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Eupec & Kg
Additional Features:
Case Connection:
Nominal Circuit Commutated Turn-off Time:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum On-state Current:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Trigger Device Type:
T340F10ENB Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Philips Components
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MCD95-16IO1B
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN DIODE; Case Connection: ISOLATED;
VCD105-18IO7
IXYS Corporation's VCD105-18IO7 is a SCR with 1800V repetitive peak reverse voltage, 180A max RMS on-state current, and 150mA DC gate trigger current. It is used in applications requiring high power control such as industrial motor drives and power supplies due to its robust design and wide operating temperature range from -40°C to 125°C.
VS-25TTS08FP-M3
VS-25TTS08FP-M3 by Vishay Intertechnology is a Silicon Controlled Rectifier with 350A peak on-state current, 16A max on-state current, and 2.5V gate trigger voltage. Ideal for applications requiring high power control such as industrial motor drives and power supplies due to its robust design and wide operating temperature range from -40°C to 125°C.
2N3555
2N3555 by Texas Instruments is a Silicon Controlled Rectifier with max on-state current of 1.6A, non-repetitive peak on-state current of 18A, and max DC gate trigger voltage of 0.7V. It is used in applications requiring precise control over electrical currents and voltages at temperatures ranging from -60 to 155°C.
TIC116S
TIC116S by Texas Instruments is a Silicon Controlled Rectifier with 20mA DC Gate Trigger Current, 80A Non Repetitive Peak On-state Current, and 5A Max On-state Current. It is used in applications requiring precise current control such as motor drives, lighting controls, and power supplies.
MCO50-12IO1
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
TZ425N18KOFHPSA1
Infineon Technologies
Infineon Technologies' TZ425N18KOFHPSA1 is a SINGLE SCR with 1800V repetitive peak reverse voltage and 800A max RMS on-state current. Ideal for high-power applications, this RECTANGULAR package SCR has a FLANGE MOUNT style and isolated case connection.
X0202MA2BL2
STMicroelectronics
X0202MA2BL2 by STMicroelectronics is a SCR with 600V repetitive peak reverse voltage, 0.8V max DC gate trigger voltage, and 1.25A max RMS on-state current. It is used in applications requiring precise control of AC power, such as motor speed control and lighting dimming systems.
TIC116M
TIC116M by Texas Instruments is a single SCR with 20mA DC gate trigger current, 80A non-repetitive peak on-state current, and 600V repetitive peak reverse voltage. It is used in applications requiring high power control such as industrial motor drives and lighting systems.
S8065KTP
Littelfuse
S8065KTP by Littelfuse is a single SCR with max on-state current of 41A, DC gate trigger voltage of 2V, and RMS on-state current of 65A. Ideal for applications requiring high power control such as industrial motor drives or power supplies.
2N1771
2N1771 by Texas Instruments is a Silicon Controlled Rectifier with 15mA DC Gate Trigger Current, 60A Non Repetitive Peak On-state Current, and 4.7A Max On-state Current. It operates b/w -65°C to 125°C and is ideal for applications requiring high current switching capabilities in various electronic circuits.
P0102AL
P0102AL by STMicroelectronics is a SCR with max DC gate trigger current of 0.2mA, non-repetitive peak on-state current of 6A, and max RMS on-state current of 0.26A. It is used in applications requiring a small outline package, such as power control circuits for consumer electronics and industrial equipment.
Z0103MNT1G
SCR; Qualification: Not Qualified; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
CMA30E1600PN
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
CS19-12HO1
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
TI145A2
TI145A2 by Texas Instruments is a single SCR with a max on-state current of 1.6A and trigger voltage of 3.5V. It has a non-repetitive peak on-state current of 30A, making it suitable for applications requiring high power control in industrial settings. The package style is cylindrical with a metal body material, ideal for robust and reliable performance in harsh environments.
2N5060
2N5060 by Texas Instruments is a single SCR with max on-state current of 0.51A and trigger voltage of 0.8V. It is used in applications requiring high current switching such as motor control systems due to its 10A non-repetitive peak on-state current capability. Operating temperature ranges from -60°C to 125°C.
T640N16TOFXPSA1
T640N16TOFXPSA1 by Infineon Technologies is a SINGLE SCR with 1600V repetitive peak reverse voltage and 1450A max RMS on-state current. Ideal for high-power applications, it features a surface mount design and 250mA max DC gate trigger current.
JANTX2N2324S
Hi-rel Components
SCR; Surface Mount: NO; Maximum On-state Current: .22 A; Repetitive Peak Off-state Voltage: 100 V; Maximum Holding Current: 2 mA; Non Repetitive Peak On-state Current: 15 A;
2N5060G
2N5060G by Onsemi is a SCR with max. DC gate trigger current of 0.2 mA, non-repetitive peak on-state current of 10 A, and max. on-state current of 0.51 A. It is used in applications requiring reliable switching capabilities at temperatures ranging from -40 to 110°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Eupec & Kg
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved