Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B37930-K5221-J60 by Epcos Ag is a ceramic capacitor with capacitance of 0.00022uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin finish, it is ideal for surface mounting in various electronic devices.
Median Price
$0.010
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
LIBRA Elektronik GmbH
ECAB
ACDS - Activité Composants Distribution Service
Atlantic Semiconductor
PC Components Company LLC
Bristol Electronics
Vyrian
Argo Parts USA
Continental Prestige Electronics
Aztec Data Supply Inc.
$0.430
Corohmni
$0.500
AZTECH Wire
$10.547
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Ceramic material provides excellent stability and reliability, making this capacitor a durable and long-lasting option.
Having 2 terminals allows for easy and secure connection in circuits, ensuring stable performance.
Surface Mount Technology (SMT) makes it easy to mount and use this capacitor in modern electronic devices.
A low negative tolerance of 5% ensures accurate and consistent capacitance values in various conditions.
The C0G temperature characteristics code indicates a high stability over temperature, making this capacitor suitable for a wide operating temperature range.
With a high maximum operating temperature of 125°C, this capacitor can withstand elevated temperatures without performance degradation.
The specified capacitance value of 0.00022uF ensures precise energy storage and release in electronic circuits.
With a rated DC voltage of 50V, this capacitor is suitable for various voltage applications while maintaining safety and reliability.
Fixed Capacitors B37930-K5221-J60 attributes and parameters. Explore more Fixed Capacitors devices from Epcos Ag
Capacitance:
Capacitor Type:
Custom Capabilities:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
B37930-K5221-J60 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TDK Electronics (previously EPCOS) develops, manufactures and markets electronic components and systems under the product brands of TDK, EPCOS, Tronics and Relyon Plasma focusing on fast-growing leading-edge technology markets, which include automotive electronics, industrial electronics and consumer electronics as well as information and communications technology. The company is positioned globally and close to its customers, employs 23,200 people at around 20 development and manufacturing sites, and has a tight-knit sales network. In addition to the production of standard products, another of our core competence is working with our customers to implement solutions that meet their needs. In fiscal 2023 (ending in March) TDK Electronics posted sales of about EUR 2.0 billion.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Frontier Electronics
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
GCM188R71H103KA37D
Murata Manufacturing
Murata Manufacturing's GCM188R71H103KA37D is a ceramic capacitor with 0.01uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EEVFK1J471M
Panasonic
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
C1812C104K5RACTU
KEMET Corporation
KEMET C1812C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C0805C222F5GACTU
The KEMET Corporation C0805C222F5GACTU is a ceramic capacitor with 0.0022 uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With SMT package style and wraparound terminals, it is ideal for compact surface mount designs in various electronic devices.
CL10B104KB8NNNL
Samsung Electro-mechanics
CL10B104KB8NNNL by Samsung Electro-mechanics is a 0603 SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring compact size and high reliability in various electronic circuits.
GRM32ER71H475KA88L
GRM32ER71H475KA88L by Murata Manufacturing is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
M39006/25-0248
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0603KRX5R6BB475
Yageo CC0603KRX5R6BB475 is a SMT ceramic capacitor with 4.7uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for applications requiring compact size, it operates b/w -55 to 85 °C in various electronic circuits.
EEEFTE221XAP
Panasonic EEEFTE221XAP is a 220uF aluminum electrolytic capacitor with 25V URdc. It has a tan delta of 0.14 and ripple current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
VJ0805Y103KXACW1BC
Vishay Intertechnology
Vishay Intertechnology VJ0805Y103KXACW1BC is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
C0402C103K3RACTU
KEMET C0402C103K3RACTU is a ceramic capacitor with 0.01uF capacitance, rated for 25V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a compact rectangular package measuring 1mm x 0.5mm x 0.5mm.
ECPU1C105MA5
Panasonic ECPU1C105MA5 is a 1uF film capacitor with 16V URdc. It has -40 to 85 °C operating temperature range and ±20% tolerance. Ideal for SMT applications due to its compact 1210 size, WRAPAROUND terminals, and PLASTIC dielectric material.
CC0402KRX7R9BB103
Yageo CC0402KRX7R9BB103 is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact fixed capacitors in electronics for reliable performance.
C0603C104J4RACTU
KEMET C0603C104J4RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and high reliability.
CC0402KRX5R9BB104
Yageo CC0402KRX5R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high temperature range from -55°C to 85°C.
GRM188R61A106KE69D
Murata Manufacturing's GRM188R61A106KE69D is a 0603 SMT ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
GCM21BR71H105KA03L
Murata Manufacturing's GCM21BR71H105KA03L is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact SMT package design.
M39006/22-0350
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL05C101JB5NNNC
Samsung Electro-mechanics' CL05C101JB5NNNC is a ceramic capacitor with 0.0001uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability in electronic circuits.
0603B103K500CT
Walsin Technology
0603B103K500CT by Walsin Technology is a ceramic capacitor with 0.01uF capacitance, rated at 50V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for surface mount applications requiring compact size and high reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B37941-K5332-K60
TDK
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0033 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37930-K5101-J60
Epcos Ag
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37930-K5010-C60
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37940-K5220-J60
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37940-K5471-J60
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00047 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37941-K5222-K60
TDK B37941-K5222-K60 is an 0805 SMT ceramic capacitor with 0.0022 uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in a wide temperature range.
B37941-K5223-K60
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37930K5151J060
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00015 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37930K5151J070
B37981-M1103-K
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
B37981-M1103-K51
B37981M1103K000
B37981M1103K054
Epcos Ag's B37981M1103K054 is a ceramic capacitor with 0.01uF capacitance and 100V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring high reliability in harsh environments such as automotive electronics and industrial equipment.
B37981M1103M000
CERAMIC CAPACITOR; Dielectric Material: CERAMIC; No. of Terminals: 2;
B37981M1103M054
B37986G5472J051
B37986G5472J051 by Epcos Ag is a ceramic capacitor with a capacitance of 0.0047 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 30ppm/°C and can operate in temperatures ranging from -55 °C to 125 °C. This fixed capacitor is commonly used in through hole mount applications.
B37931K9333K060
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .033 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
The TDK B37931K9333K060 is a ceramic capacitor with 0.033uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance.
B37931K9333K070
B37930-K5221-J01
CERAMIC CAPACITOR; Capacitance: .00022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Length: 1.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved