Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Height: 1.8 mm; No. of Functions: 1; Color: SUPER RED/GREEN;
Median Price
$0.140
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
DF Sales Co.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Zilex Electronics Inc.
ComSIT Distribution GmbH
ComSIT USA
Pegasus Components GmbH
Rebound Electronics
Bristol Electronics
J2 Sourcing AB
Tectiva GmbH
LIBRA Elektronik GmbH
PC Components Company LLC
ABC Electronics Ltd.
Digital Electronic Gebert Verwaltungs UG
Holdelec - ElecDif-Pro
Vyrian
GES GmbH
Florida Circuit
Inventory MP
Q Components
Martec Srl
Prism Electronics
ECAB
Global Solutions Electronics Company
Nova Conductors
Digiode
Modulus Dynamics
$0.764
$0.733
$0.703
AZTECH Wire
$14.750
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Aranea Global
Kepictronics
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
Corphita
Continental Prestige Electronics
Visible LEDs LSGT670 attributes and parameters. Explore more Visible LEDs devices from Elma Electronic
Color:
Configuration:
Mounting Feature:
No. of Functions:
No. of Terminals:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
LSGT670 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Elma Electronic is a global leader in embedded computing solutions including integrated chassis systems, board products, modular enclosures, equipment cabinets and precision hardware components in standard and custom configurations. As a global organization, we keep close to our customers and partners worldwide with sales, design and manufacturing facilities across three continents. Reliability and long-term support with a history of deep technical expertise and precision engineering. That’s Elma. Elma is a global leader and industry innovator in advanced embedded computing solutions. Our products and integrated platforms are based on a set of modular building blocks such as enclosures, precision hardware components, rotary switches, and embedded computing boards.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Won-top Electronics
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Leshan Radio
Sensitron Semiconductor
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Rectron
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
SSL-LXA3025IGC-TR
Lumex
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
TLMO1000-GS08
Vishay Intertechnology
TLMO1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 610nm and max forward current of 0.015A. Ideal for applications requiring soft orange light, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
SML-D12M8WT86C
ROHM
ROHM's SML-D12M8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light with luminous intensity of 25.0mcd, suitable for TR packing in electronics industry.
KPT-1608SURCK
Kingbright Electronic
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
150141GS73100
Wuerth Elektronik & Kg
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
SSF-LXH100YD
The Lumex SSF-LXH100YD is a 5mm yellow LED with a peak wavelength of 585nm and a viewing angle of 60°. It has a built-in resistor, operates at temperatures from -40°C to 85°C, and has a luminous intensity of 30.0mcd. Ideal for applications requiring a reliable, bright yellow light source in various electronic devices.
SSL-LX3044SYC
SSL-LX3044SYC by Lumex is a 3mm single color LED with built-in resistor, emitting super yellow light at peak wavelength of 590nm. With max forward current of 0.025A and viewing angle of 30°, it's ideal for applications requiring radial mounting such as indicator lights in electronic devices.
LTST-C170CKT
Lite-on Technology
LTST-C170CKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 130°, making it ideal for applications requiring red light emission in compact spaces.
HLMP-3507-D00B1
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SLR-56YY3F
ROHM's SLR-56YY3F is a 5mm SINGLE COLOR LED with peak wavelength of 585nm. With max forward current of 0.02A, it offers yellow light at 10.0mcd luminous intensity. Ideal for applications requiring diffused yellow light emission in a compact form factor.
MLCAWT-A1-0000-000XE1
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; Height: 1.2 mm; No. of Functions: 1; Maximum Forward Voltage: 3.4 V; Minimum Luminous Intensity: 120 cd;
HSMS-C150
Broadcom
HSMS-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, with a viewing angle of 170° and surface mounting feature.
553-0133-200F
Dialight
Dialight's 553-0133-200F is a 3mm LED array with separate, 2-element configuration. It has a peak wavelength of 585/565nm and max forward current of 0.02A. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
MLCAWT-H1-0000-000XE3
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 150 Cel; Maximum Forward Current: .35 A; Color At Wavelength: White;
CMD15-21VGC/TR8
Visual Communications Company
CMD15-21VGC/TR8 by Visual Communications Company is a 2mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this green LED operates b/w -40 to 85 °C, offering clear lens and rectangular shape.
598-8030-107F
Dialight's 598-8030-107F is a single color LED with a max forward current of 0.025 A and a viewing angle of 140°. It is commonly used in surface mount applications for its orange light emission.
553-0221F
Dialight 553-0221F is a dual color LED array with separate configuration, 3mm size, and 2 elements. It has peak wavelengths of 650nm (red) and 563nm (green), ideal for status indicators in electronics due to its high luminous intensity of 10/16mcd. With a max forward current of 0.007A and voltage of 3V, it operates b/w -55°C to 100°C temperature range.
150060SS75000
150060SS75000 by Wurth Elektronik is a single color LED with peak wavelength of 645nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A and nominal luminous intensity of 60.0mcd. Ideal for surface mount applications in electronics requiring super red light emission.
XHP35B-00-0000-0D0HD230E
Wolfspeed
SINGLE COLOR LED;
QS83XXW12
Apem Components
Visible LEDs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
LSGT676-P7Q7-1+N7P7-24-ZB
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24-ZB is a dual color LED with separate configuration and 2.4mm size. It has a max forward current of 0.03A and peak wavelengths of 645nm (hyper bright super red) and 572nm (hyper bright green). This LED is suitable for surface mount applications requiring a viewing angle of 120°.
LSGT676-P7R-1-0+N7P9-24
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24 is a dual-color LED with peak wavelengths of 645nm (super red) and 572nm (green). It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for surface mount applications in electronics requiring separate red and green light sources.
LSGT676-P7R-1-0+N7P9-24-0-20-R18-ZB
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 118.0/68.0; Lens Type: COLORLESS CLEAR; Viewing Angle: 120 deg;
LSGT67K-JL-1-0+HK-1-0-2-R18-Z
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 11.25/7.0; Lens Type: COLORLESS CLEAR; Maximum Forward Voltage: 2.2 V;
LSGT676-P7Q7-1-0+N7P7-24-0
Osram Opto Semiconductors' LSGT676-P7Q7-1-0+N7P7-24-0 is a dual color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/63.0 mcd. Ideal for applications requiring separate elements in a compact size such as indicator lights or signage displays.
LSGT670-Z
LSGT670-Z by Osram Opto Semiconductors is a dual color LED with separate configuration and 2.4mm size. It has a max forward current of 0.03A and peak wavelengths of 635nm (super red) and 572nm (green). This LED is commonly used in applications such as surface mount lighting with a viewing angle of 120°.
LSGT670
Infineon Technologies
Visible LEDs; Lens Type: CLEAR; Minimum Operating Temperature: -55 Cel; Viewing Angle: 0 deg; Peak Wavelength (nm): 635; Minimum Luminous Intensity: 120 cd;
Mentor & Prazisions Bauteile Kg
Visible LEDs; Lens Type: CLEAR; Maximum Forward Voltage: 2.5 V; Height: 2.1 mm; Maximum Reverse Voltage: 12 V; Maximum Forward Current: .03 A;
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 11.25; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin (Sn);
LSGT670-J+L
Visible LEDs; Lens Type: CLEAR; Maximum Reverse Voltage: 5 V; Color At Wavelength: Green/Red; Minimum Operating Temperature: -55 Cel; Peak Wavelength (nm): 635;
LSGT670JL
Visible LEDs; Lens Type: CLEAR; Height: 2.1 mm; Maximum Operating Temperature: 100 Cel; Viewing Angle: 120 deg; Peak Wavelength (nm): 635;
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 5.8/14.6; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin (Sn);
LSGT670-JL
Siemens
Siemens LSGT670-JL is a 2.4mm DUAL COLOR LED with peak wavelengths of 610nm/565nm and viewing angle of 120°. Ideal for surface mount applications, it offers max forward current of 0.03A and nominal luminous intensity of 12mcd.
LSGT670-K+K
Visible LEDs; Lens Type: CLEAR; Height: 1.9 mm; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 2.6 V;
LSGT670-J+J
Visible LEDs; Lens Type: CLEAR; Peak Wavelength (nm): 635; Height: 1.9 mm; Minimum Operating Temperature: -55 Cel; Minimum Luminous Intensity: 120 cd;
LSGT670-K+L
Visible LEDs; Lens Type: CLEAR; Maximum Operating Temperature: 100 Cel; Maximum Reverse Voltage: 5 V; Viewing Angle: 0 deg; Minimum Luminous Intensity: 120 cd;
LSGT670-L+J
Visible LEDs; Lens Type: CLEAR; Height: 1.9 mm; Viewing Angle: 120 deg; Peak Wavelength (nm): 635; Maximum Operating Temperature: 100 Cel;
LSGT670-J+K
Visible LEDs; Lens Type: CLEAR; Maximum Forward Current: .03 A; Maximum Forward Voltage: 2.6 V; Minimum Luminous Intensity: 120 cd; Minimum Operating Temperature: -55 Cel;
LSGT670-J-E-7510
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: COLORLESS CLEAR; Shape: ROUND;
Elma Electronic
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved