Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 12 A; Terminal Shape: END CAP;
Median Price
$3.851
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Walker Industrial
1+ parts
$0.990
100+ parts
-
1k+ parts
10k+ parts
Airline Hydraulics
$5.150
Mouser Electronics
$6.660
$3.000
IEC Supply
$25.000
Verical
$2.371
Chip1Stop
$3.610
Heilind Electronics
Interstate Connecting
Carlton-Bates
$1.940
TEDSS.com
$2.000
$0.500
Hutch & Son
$2.300
Galco
$2.310
Nova Conductors
$2.620
Component Electronics Inc.
$3.080
Quotebeam
VNN
Vyrian
Rapid Electronics
$3.309
IBS Electronics
$3.159
EMSNET
Ampacity Inc.
$0.840
Continental Prestige Electronics
$2.568
Argo Parts USA
Aztec Data Supply Inc.
$4.028
Corohmni
$17.323
Netroflash
$2.489
$2.437
Authorized Procurement Solutions
Perfect Parts
Fuses ABC-12-R attributes and parameters. Explore more Fuses devices from Eaton Corporation
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
ABC-12-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Today, the world runs on critical infrastructure and technology. Planes. Hospitals. Factories. Data centers. Vehicles. The electrical grid. These are things people depend on every day. And the companies behind them depend on us to help solve some of the toughest power management challenges on the planet. At Eaton, we’re dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable.We are a power management company doing business in more than 175 countries. Our energy-efficient products and services help our customers effectively manage electrical, hydraulic and mechanical power more reliably, efficiently, safely and sustainably. By giving people tools to use power more efficiently. Helping companies do business more sustainably. And by encouraging each and every employee at Eaton to think differently about our business, our communities—and the positive impact we can have on the world.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1552200253
Molex
WIRE AND CABLE;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Eic Semiconductor
SR-5-1A-AP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Height: 8.1 mm;
0034.6618
Schurter Ag
Schurter Ag 0034.6618 fuse has 34J nominal joule integral, rated AC voltage of 250V, and a max operating temperature of 125°C. It is used for circuit protection with a time lag blow characteristic in applications requiring a rated current of 2A and rated breaking capacity of 35A.
S218194
Mersen S A
Mersen S A's S218194 fuse has 10A rated current, 500V AC voltage, and 120000A breaking capacity. With a body length of 10.2mm and height of 38mm, it is used for electric circuit protection in inline/holder mounting applications at up to 250V DC.
FNQ-R-20
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
TCF60RN
Eaton Corporation
Eaton Corporation's TCF60RN fuse is rated for 600V AC and 300V DC with a 60A current. With time delay blow characteristic, it offers circuit protection in inline/holder mounting applications. Measuring 54.1mm x 25.4mm x 28.58mm, it meets CSA and UL standards for electrical safety.
17.5TDLSJ16
The Eaton Corporation 17.5TDLSJ16 fuse is a 16A electric fuse with a rated AC/DC voltage of 17500V, offering a high breaking capacity of 50000A. With dimensions of 51mm x 292mm and built-in indicator features, it is commonly used for circuit protection in various applications requiring reliable overcurrent protection.
0297004.WXNV
Littelfuse
Littelfuse 0297004.WXNV is a MINI fuse with 4A rated current, 31J nominal joule integral, and 0.03s trip time. It is used for circuit protection in applications requiring a 32V rated voltage, such as automotive electronics and power distribution systems.
ATDR15
The Mersen S A ATDR15 fuse is a 15A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a rated breaking capacity of 200000A.
ERBRD0R50X
Panasonic
The Panasonic ERBRD0R50X fuse is a 0402 size with 0.5A rated current and 35A breaking capacity. It has fast blow characteristic, -40 to 125 °C operating temperature range, and UL/CUL standards. Ideal for electric circuit protection in surface mount applications due to its compact size and high breaking capacity.
FNQ-R-15
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
CM32F
ELECTRIC FUSE;
25ET
25ET fuse by Eaton Corporation is a 25A electric fuse with a rated AC voltage of 690V and rated DC voltage of 350V. With a nominal joule integral of 25J and rated breaking capacity of 200kA, it is ideal for circuit protection in various applications. This fuse has dimensions of 48mm x 19.1mm and features TAB/BLADE terminals for easy installation in INLINE/HOLDER mounting setups.
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
0685H9300-01
Bel Fuse
ELECTRIC FUSE; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3;
MST2A250V
SPC TECHNOLOGY/ MULTICOMP
MST2A250V fuse by Spc Technology/Multicomp is a 2A, 250V slow blow electric fuse with a rated breaking capacity of 100A. With dimensions of 8.35mm x 4.3mm x 7.7mm, it is suitable for circuit protection in applications requiring a nominal joule integral of 32J and operating temperatures ranging from -55°C to 125°C.
0218002.MXP
Littelfuse 0218002.MXP fuse, rated 2A and 250V, features a time lag blow characteristic with trip time of 0.02s. With dimensions of 5x20mm, it offers circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CE, CSA, KC, PSE, SEMKO, SEV, UL and VDE standards.
ANL-80
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
0218002.HXP
Littelfuse 0218002.HXP fuse, rated 2A at 250V, features time lag blow characteristic with 0.02s trip delay. Ideal for circuit protection in applications requiring supplemental fuses with 5x20mm size and nickel terminal finish. Compliant with CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, VDE standards.
36913150000
Littelfuse 36913150000 fuse has a Nominal Joule Integral of 78.388 J, Rated AC Voltage of 300 V, and Trip Time/Delay of 20 sec. It is used for circuit protection with a rated current of 3.15 A, blow characteristic as TIME LAG, and max operating temperature at 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3AB12-R
Bel Fuse's 3AB12-R fuse, rated at 12A and 250V, offers a fast blow characteristic with a nominal joule integral of 501J. Measuring 6x32mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
ABC-10-R
ABC-10-R by Eaton Corp is a 10A fuse with 250V AC/125V DC rated voltage, 208.8J nominal joule integral, and fast blow characteristic. Ideal for circuit protection in inline/holder mounting applications due to its compact size of 6.35mm x 31.75mm and high breaking capacity of 200A. Compliant with CSA and UL standards for reliable electrical safety measures.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 10 A; Terminal Shape: END CAP;
ABC-1-1/2-R
Eaton Corporation's ABC-1-1/2-R fuse, rated at 1.5A and 250V, offers fast blow characteristic with a trip time of 120s. With a nominal joule integral of 1.163J, it provides electric circuit protection in inline/holder mounting applications per CSA and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
ABC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1 A; Terminal Shape: END CAP;
ABC-1-R by Eaton Corp is a 1A fuse with 250V AC/125V DC rated voltage, 0.431J joule integral, and fast blow characteristic. It has a trip time of 120s, nickel terminal finish, and CSA/UL reference standards. Ideal for inline circuit protection in applications requiring a compact 3AB size fuse.
ABC-1/2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: END CAP;
ABC-1/4-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .25 A; Terminal Shape: END CAP;
ABC-12
ABC-10
ABC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 15 A; Terminal Shape: END CAP;
ABC-15
ABC-18-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 18 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ABC-1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
ABC-13
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 13 A; Terminal Shape: END CAP;
ABC-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .1 A; Terminal Shape: END CAP;
ABC-1/10-R
ABC-13-R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved