Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: 5 mT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.450
100+ parts
1k+ parts
10k+ parts
$0.432
Northwest PG Solutions
$0.495
$0.436
Andel Nordic
$7.201
$6.913
Glotronic Ltd.
Magnetic Field Sensors ATS276G-PL-B-A attributes and parameters. Explore more Magnetic Field Sensors devices from Diodes Incorporated
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Hysteresis:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Output Polarity:
Output Type:
Package Equivalence Code:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
ATS276G-PL-B-A Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
Gulf Semiconductor
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Comchip Technology
DRV5053VAEDBZRQ1
Texas Instruments
DRV5053VAEDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 150°C. It offers an analog output voltage range of 0-2V, making it ideal for applications requiring precise magnetic field measurements in automotive systems compliant with AEC-Q100 standards.
DRV5023BIQDBZT
DRV5023BIQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 8.5mT. It operates in temperatures from -40°C to 125°C, offering an output range of 0-38V via open-drain interface. Ideal for applications requiring precise digital voltage output based on magnetic field detection.
CT100LW-ID6-M
Murata Manufacturing
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
TLE49655MXTSA1
Infineon Technologies
TLE49655MXTSA1 by Infineon is a magnetic field sensor with 3-5.5V supply voltage, 2.5mT hysteresis, and 0-5mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small rectangular shape (1.3" x 2.9mm) and surface mount feature.
DRV5056A4QDBZT
Texas Instruments' DRV5056A4QDBZT is a magnetic field sensor with 3-3.63V supply voltage range and -40 to 125°C operating temperature. It outputs analog voltage in the range of 0.55-3.1V, suitable for Hall effect applications like position sensing and current measurement in compact designs. With a small form factor of 2.92x1.3x1.12mm, it's ideal for surface mount installations in various electronic devices.
AH1806-P-B
AH1806-P-B by Diodes Inc. is a Hall effect magnetic field sensor with 2.5V to 5.5V supply voltage range, hysteresis of 1mT, and -40°C to 85°C operating temperature. Ideal for applications requiring precise voltage output based on magnetic field strength in the range of 0.4mT to 4.5mT.
AH3572-SA-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
DRV5056Z4QDBZT
Texas Instruments' DRV5056Z4QDBZT is a magnetic field sensor with 3 terminals, operating from -40 to 125°C. It has a supply voltage range of 3-5.5V and output current up to 1A, suitable for Hall effect applications in various industries. The sensor outputs an analog current within the -1-1mA range, featuring a unipolar input mode and surface mounting feature.
DRV5013ADQDBZT
DRV5013ADQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 5.4mT. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise digital voltage output based on magnetic field strength. The sensor features an open-drain output type and latched bipolar input mode, housed in a rectangular plastic package ideal for surface mount installations.
A1104EUA-T
Allegro MicroSystems' A1104EUA-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and 24V max supply. With a hysteresis of 5.5mT and operating range up to 45mT, it's ideal for automotive applications requiring AEC-Q100 screening at temperatures from -40°C to 85°C.
APS11700LLHALT-0SL
APS11700LLHALT-0SL by Allegro MicroSystems is a magnetic field sensor with 3.3V to 24V supply voltage range, hysteresis of 1.75mT, and -40°C to 150°C operating temperature. Ideal for applications requiring precise voltage output based on magnetic field strength in compact surface-mount designs.
A1323ELHLT-T
Allegro MicroSystems A1323ELHLT-T is a magnetic field sensor with 5V supply, 1.5% linearity, and 2.5 mV/G sensitivity. Ideal for applications requiring digital voltage output in temperature range of -40 to 85°C. Package: PLASTIC/EPOXY, Style: RECTANGULAR, Mounting: SURFACE MOUNT.
A1121LUA-T
Allegro MicroSystems' A1121LUA-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 2.5mT. Ideal for automotive applications due to AEC-Q100 screening, BICMOS technology, and current output ranging from 30-60mA.
A1152LLHLX-T
Allegro MicroSystems A1152LLHLX-T is a magnetic field sensor with 3mT hysteresis, operating voltage range of 3-24V, and outputting analog current. Ideal for applications requiring precise magnetic field detection in a compact package, such as automotive sensors or industrial automation systems.
A1190LUA-T
Allegro MicroSystems A1190LUA-T is a magnetic field sensor with 3mT hysteresis, operating voltage range of 3-24V. Ideal for applications requiring precise analog current output in temperature range -40 to 150°C. Features BICMOS technology, UNIPOLAR input mode, and can detect magnetic fields up to 20mT.
AH1389-HK4-7
AH1389-HK4-7 by Diodes Inc. is a magnetic field sensor with 1.6-3.6V supply voltage range, -40 to 85°C operating temp, and 0.5 mT hysteresis. Ideal for hall effect applications, it offers a voltage output ranging from 0.20-1.65V in a compact rectangular package for surface mount soldering.
DRV5056A1EDBZRQ1
DRV5056A1EDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.6V and operating temperature from -40°C to 150°C. It features an analog current output ranging from -1mA to 1mA, making it ideal for automotive applications requiring precise magnetic field detection in harsh environments. With AEC-Q100 screening level, this rectangular surface mount sensor offers high accuracy and reliability for automotive systems.
A1244LUA-I1-T
Allegro MicroSystems' A1244LUA-I1-T is a magnetic field sensor with 3-24V power supply, 11mT hysteresis, and -40 to 150°C operating temperature range. Ideal for applications requiring precise analog current output in detecting magnetic fields within ±8mT range.
A3211ELHLT-T
Allegro MicroSystems' A3211ELHLT-T is a magnetic field sensor with 3.5V max supply voltage, -40 to 85°C operating temp range, and 5.5mT max magnetic field range. Ideal for automotive applications due to AEC-Q100 screening level, this Hall effect sensor offers digital current output and compact rectangular package for surface mount installation.
A3506LU
Sanken Electric
MAGNETIC FIELD SENSOR,HALL EFFECT; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Body Height: 6.61 mm; Body Width: 1.55 inch; Sensitivity (mV/G): 27.5 mV/G;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATS276-PLA-A
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 25 mA;
ATS276H-PL-B-B
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER;
ATS276-P-C
ATS276-PA-A
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Hysteresis: 7.5 mT;
ATS276H-PG-B-B
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; JESD-609 Code: e3;
ATS276-PLA-B
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 20 V;
ATS266-PA-B
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Range Of Magnetic Field: -10 mT;
ATS276-P-A
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: 5 mT;
ATS276G-PL-B-B
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output (V): OPEN-COLLECTOR;
ATS276-P-B
ATS276-PA-B
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Range Of Magnetic Field: -7 mT;
ATS276H-PG-B-A
ATS276-PL-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.30-0.60V;
ATS266-PLA-B
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Technology: BIPOLAR;
ATS276H-PL-B-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Height: 3.65 mm;
ATS266-PA-A
Magnetic Field Sensors; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 1.55 inch;
ATS266-PLA-A
ATS276G-PL-B-C
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
ATS276-PA-C
Integrated Circuit Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 25 mA; Body Height: 5.07 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved