Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AP3401DNTR-G1 by Diodes Inc. is a current-mode switching regulator with a buck switcher config, operating at 1500 kHz max frequency. It has a wide input voltage range of 2.5V to 5.5V and can deliver output voltages from 0.6V to 5.5V, making it ideal for industrial applications requiring precise power regulation in a compact package.
Median Price
$0.185
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.410
100+ parts
$0.219
1k+ parts
-
10k+ parts
$0.144
DigiKey
$0.166
Arrow
$0.119
Verical
$0.120
Farnell
$0.158
$0.132
Element14
$0.192
$0.159
$0.151
Newark
$0.282
$0.255
Nova Conductors
TME
$0.340
$0.174
Maritex
$0.413
$0.211
$0.170
Vyrian
Chip Stock
VNN
Demsay Elektronik
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
NexGen Digital
Semicontronic
$0.081
$0.079
Ampacity Inc.
Argo Parts USA
$0.139
Netroflash
Continental Prestige Electronics
$0.318
$0.098
Advanced Electronics
$5.257
$4.784
$4.311
Corohmni
$5.786
Aztec Data Supply Inc.
$12.970
Lixinc
Robosynatics
Lucentia Tech
$11.826
$11.584
Formix International (Excess)
Plastic/Epoxy material is durable and reliable, making the product resistant to damage and ensuring a long lifespan.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort.
Ability to provide a low minimum output voltage allows for flexibility in various applications requiring precise voltage regulation.
Current-mode control provides better dynamic response and stability, improving overall performance and efficiency.
High switching frequency enables fast response times and efficient power conversion, making it suitable for high-performance applications.
Switching Regulators & Controllers AP3401DNTR-G1 attributes and parameters. Explore more Switching Regulators & Controllers devices from Diodes Incorporated
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
AP3401DNTR-G1 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev A/T Site 16/Apr/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LM555CM
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LMZM23601V5SILR
LMZM23601V5SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package style. Suitable for various power management needs in automotive electronics.
TPS62040DGQR
TPS62040DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage range from 0.7V to 6V. It is ideal for industrial applications requiring a compact design, high efficiency (up to 1500 kHz), and max output current of 2.2A.
TL494BDR2G
TL494BDR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C and supports a max output current of 0.5 A at a frequency of 200 kHz. Ideal for automotive applications due to its small outline package style and push-pull switcher configuration.
TPS60403DBVTG4
TPS60403DBVTG4 by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06 A and a max switching frequency of 400 kHz. It operates in industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring efficient voltage conversion in compact spaces.
LM2576HVS-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LT8609SEV#PBF
Analog Devices
LT8609SEV#PBF by Analog Devices is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 125°C. With a max output current of 5.7A and PWM control technique, it's ideal for automotive applications requiring a buck switcher with a wide input voltage range of 2.7-42V and high switching frequency up to 2200 kHz.
LM2675MX-12/NOPB
LM2675MX-12/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 12V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide temperature range (-40 to 125°C).
LMZ22005TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
LM5008MM
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS61022RWUR
TPS61022RWUR by Texas Instruments is a switching regulator with a max output current of 10A and a max switching frequency of 1000kHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LTM4644IY-1#PBF
Analog Devices' LTM4644IY-1#PBF is a switching regulator with 77 terminals, operating b/w -40 to 125°C. It features a buck switcher config, PWM control mode, and supports input voltages from 4V to 14V. Ideal for automotive applications due to its high switching frequency of 1300 kHz and compact size of 15x9mm.
LMR54410FDBVR
LMR54410FDBVR by Texas Instruments is a switching regulator with a 1A output current and 1100 kHz max switching frequency. It operates b/w -40 to 125°C, suitable for various applications requiring a compact design and efficient power management in the voltage range of 4-36V.
TPS63000DRCT
TPS63000DRCT by Texas Instruments is a switching regulator with max output voltage of 5.5V and max output current of 2A. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power conversion in a compact form factor. With a control mode of current-mode PWM, it offers precise regulation for various electronic devices.
TPS54202HDDCR
TPS54202HDDCR by Texas Instruments is a switching regulator with 2A output current, 500kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its small size, PWM control mode, and buck switcher configuration.
LM2594M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5156HPWPR
LM5156HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, supports up to 300V output voltage, and has a max switching frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level.
LM2733YMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14202TZ-ADJ/NOPB
LMZ14202TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 2A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM5017MRE/NOPB
LM5017MRE/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This small outline package with dual terminals is ideal for space-constrained designs requiring efficient power management.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP3429AKTTR-G1
AP3429AKTTR-G1 by Diodes Inc. is a switching regulator with a small outline and very thin profile package style. It operates at temperatures ranging from -40 to 85°C and has a max switching frequency of 1000 kHz. This IC is commonly used in industrial applications for voltage regulation with an input range of 2.7-5.5V and an output voltage of 1.8V.
AP3428KTTR-G1
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP3429KTTR-G1
AP3429KTTR-G1 by Diodes Inc. is a small outline, very thin profile switching regulator with 5 terminals and matte tin finish. It operates b/w -40 to 85°C, has a max switching frequency of 1000 kHz, and supports pulse width modulation control technique. Ideal for industrial applications requiring a buck switcher with input voltage range of 2.7-5.5V and output voltage of 1.8V.
AP3428DNTR-G1
AP3428DNTR-G1 by Diodes Incorporated is a switching regulator with a nominal input voltage of 5V and a max output voltage of 5.5V. It operates at temperatures ranging from -40°C to 85°C and is commonly used in industrial applications requiring pulse width modulation control.
AP3440FNTR-G1
Diodes Inc. AP3440FNTR-G1 is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 85°C. It has a max output current of 4A and operates at a frequency of up to 2MHz. Ideal for industrial applications requiring efficient buck switching regulators in compact square chip carrier packages.
AP34063S8G-13
AP34063S8G-13 by Diodes Inc. is a small outline switching regulator with 1.6A output current, 100kHz max frequency, and buck-boost configuration. Ideal for applications requiring efficient voltage regulation in a compact design, such as portable electronics and power supplies.
AP3428WT-7
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
AP3401KTTR-G1
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP3418KTR-G1
Bcd Semiconductor Manufacturing
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diodes Inc. AP3418KTR-G1 is a switching regulator with 1.5A output current, PWM control mode, and 1680kHz max frequency. Ideal for industrial applications requiring low profile design, it operates b/w -40 to 85°C with input voltage range of 2.5-5.5V for efficient power management in compact spaces.
AP3445LW6-7
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Input Voltage: 2.7 V;
AP34063S8L-13
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP3441SHE-7B
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30;
AP3402KTTR-G1
AP3428AWT-7
SWITCHING REGULATOR; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
AP3428AKTTR-G1
AP3428AKTTR-G1 by Diodes Inc. is a switching regulator with a nominal input voltage of 5V and a max output voltage of 5.5V. It has a small outline, very thin profile package style and is suitable for industrial applications requiring pulse width modulation control.
AP3417CKTR-G1
AP3417CKTR-G1 by Diodes Inc. is a switching regulator with 5 terminals, operating b/w -40 to 85°C. It features a current-mode control mode, buck switcher config, and max switching frequency of 1500 kHz. Ideal for industrial applications requiring compact design and efficient power management in the temperature range of -40 to 85°C.
AP3445W6-7
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE;
AP3406ADN-ADJTRG1
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved