Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AH180N-WSG-7 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 2.5V to 5.5V, and hysteresis of 1mT. It outputs digital voltage in open-drain format and has a temperature range from -40°C to 85°C. Ideal for applications requiring precise magnetic field detection in compact spaces.
Median Price
$0.282
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Bristol Electronics
Inventory MP
Aranea Global
$0.276
$0.265
Continental Prestige Electronics
Argo Parts USA
$0.274
AZTECH Wire
$7.178
Ampacity Inc.
$43.750
Kepictronics
Lixinc
Authorized Procurement Solutions
Provides durability and protection for the sensitive sensor components, making it suitable for various industrial applications.
Allows for a wide range of power supply options, ensuring compatibility with different systems.
Provides accurate and stable measurements by minimizing the effects of magnetic field fluctuations.
Compact size allows for easy integration into small spaces without compromising performance.
Optimal power supply requirement for efficient operation and performance of the sensor.
Utilizes Hall effect technology for precise and reliable detection of magnetic fields.
Simple and straightforward connection setup for easy installation and use.
Low profile design allows for versatile mounting options and flexibility in placement.
Sleek and modern design for a professional and streamlined look.
Allows for operation in low power environments, extending the sensor's usage capabilities.
Can withstand high temperatures, making it suitable for challenging industrial environments.
Provides a clear and consistent output signal for easy interpretation and integration into systems.
Digital output for direct interface with microcontrollers and digital systems for seamless integration.
Can operate in extreme cold temperatures, ensuring reliable performance in harsh conditions.
Corrosion-resistant finish for long-term durability and reliability.
Open-drain output for easy implementation in various circuit configurations.
Low power consumption for energy-efficient operation.
Non-inverting output for easy signal interpretation and compatibility with other systems.
Can detect small changes in magnetic field strength for precise measurements.
Wide magnetic field detection range for versatility in applications.
Compact size for easy integration and installation in space-restricted environments.
Secure and reliable termination for stable connections and operation.
Easy and convenient mounting option for quick and hassle-free installation.
Magnetic Field Sensors AH180N-WSG-7 attributes and parameters. Explore more Magnetic Field Sensors devices from Diodes Incorporated
Body Width:
Body Height:
Body Length/Diameter:
Hysteresis:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Output Polarity:
Output Range:
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
AH180N-WSG-7 Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 24/Jan/2018
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Rectron
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DRV5032FALPGM
Texas Instruments
Texas Instruments' DRV5032FALPGM is a magnetic field sensor with 3 terminals, operating voltage range of 1.65-5.5V, and hysteresis of 1.5mT. Ideal for applications requiring digital current output in the -40 to 85°C temperature range, such as proximity sensing and position detection in various industries.
DRV5011ADYBHR
DRV5011ADYBHR by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 4mT hysteresis, and -40 to 125°C operating temperature range. Ideal for applications requiring digital current output in a square package style, such as automotive sensors and industrial control systems.
S-5712ANDL2-I4T1U
Ablic
Ablic's S-5712ANDL2-I4T1U is a magnetic field sensor with 3.5V max supply voltage, 1mT hysteresis, and -40 to 85°C operating temp range. Ideal for applications requiring precise voltage output in detecting magnetic fields up to 6mT.
A1325LLHLT-T
Allegro MicroSystems
Allegro MicroSystems' A1325LLHLT-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 9mA max current. Ideal for applications requiring Hall effect sensors like automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and analog voltage output.
DRV5056A4EDBZRQ1
Texas Instruments' DRV5056A4EDBZRQ1 is a magnetic field sensor with 3-3.6V supply voltage range, AEC-Q100 screening level, and -40 to 150°C operating temperature. Ideal for automotive applications, this Hall effect sensor offers an analog voltage output ranging from 0.20-3.10V and can detect magnetic fields as low as 155mT.
SS495B
Honeywell Sensing And Control
SS495B by Honeywell is a magnetic field sensor with 3 terminals, 1.57" width, and 4.06mm length. It operates b/w -40 to 150°C, with sensitivity of 3.125mV/G for a magnetic field range of -67mT to 67mT. Ideal for applications requiring precise analog current output in a compact rectangular package.
A1123ELHLT-T
MAGNETIC FIELD SENSOR,HALL EFFECT;
AH180N-WSG-7
Diodes Incorporated
A1122LLHLT-T
Allegro MicroSystems A1122LLHLT-T is a magnetic field sensor with 24V max supply voltage, 2.5mT hysteresis, and -40 to 150°C operating temp range. Ideal for automotive applications due to AEC-Q100 screening, BICMOS technology, and unipolar input mode.
SS49E-L
SS49E-L by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package.
A3423EK-T
Allegro MicroSystems' A3423EK-T is a magnetic field sensor with 24V max supply voltage, 3mT hysteresis, and 500mV output range. Ideal for applications requiring Hall effect sensors, it operates b/w -40 to 85°C temperatures and offers single-ended analog voltage output.
TLI49632MXTSA1
Infineon Technologies
TLI49632MXTSA1 by Infineon is a magnetic field sensor with 5.5V max supply voltage, 10mT hysteresis, and -40 to 125°C operating temp range. Ideal for current output applications like automotive, industrial control systems, and robotics due to its compact size and high sensitivity.
DRV5056Z4QDBZT
Texas Instruments' DRV5056Z4QDBZT is a magnetic field sensor with 3 terminals, operating from -40 to 125°C. It has a supply voltage range of 3-5.5V and output current up to 1A, suitable for Hall effect applications in various industries. The sensor outputs an analog current within the -1-1mA range, featuring a unipolar input mode and surface mounting feature.
DRV5032FADMRT
DRV5032FADMRT by Texas Instruments is a magnetic field sensor with a supply voltage range of 1.65V to 5.5V and hysteresis of 1.5mT, suitable for applications requiring digital current output in the -40°C to 85°C temperature range. With a max magnetic field range of 4.8mT, this rectangular sensor offers an output current up to 5A and operates on an open-drain configuration for versatile usage in various electronic systems.
SS411A-T2
MAGNETIC FIELD SENSOR,HALL EFFECT; Power Supplies (V): 3.8/30;
A1319LLHLT-5-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
TLE4935LHALA1
TLE4935LHALA1 by Infineon is a magnetic field sensor with 24V max supply voltage, 40mT hysteresis, and -40 to 150°C operating temp. Ideal for applications requiring digital current output in a compact rectangular package.
SM351LT
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Power Supplies (V): 1.8/5;
RR121-1B93-312
Coto Technology
RR121-1B93-312 by Coto Technology is a magnetic field sensor with 3.6V max supply voltage, 1mT hysteresis, and 0.30-2.70V digital output range. Ideal for applications requiring precise magnetic field detection in compact spaces with temperatures ranging from -40 to 125°C.
ACS724LMATR-65AB-T
ACS724LMATR-65AB-T by Allegro MicroSystems is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 4.5-5.5V and max current of 14mA. Ideal for automotive applications due to AEC-Q100 screening level and Hall effect technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
AH1802-WG-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.30V;
AH180N-WG-7
AH180N-WG-7 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 2.5V to 5.5V, and hysteresis of 1mT. It is a Hall effect sensor with digital voltage output suitable for applications requiring non-inverting polarity detection in temperature ranges from -40°C to 85°C. Ideal for surface mount installations due to its compact rectangular package design (3mm x 1.6 inch x 1.15 mm).
AH182-WG-7
AH182-WG-7 by Diodes Inc. is a magnetic field sensor with 1mT hysteresis, 5.5V max supply voltage, and 0.30V output range. Ideal for applications requiring Hall effect sensors, it operates b/w -40 to 85°C and has a non-inverting analog voltage output suitable for surface mounting.
AH1883-ZG-7
AH1883-ZG-7 by Diodes Inc. is a magnetic field sensor with a supply voltage range of 1.65V to 3.3V and an operating temperature range of -40°C to 85°C. It has a non-inverting analog voltage output type and can detect magnetic fields ranging from 0.6mT to 5.5mT, making it suitable for various applications such as position sensing and proximity detection in automotive and industrial systems.
AH183-WG-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.30V; Body Height: 1.206 mm;
AH1806-W-7
AH1806-W-7 by Diodes Inc. is a magnetic field sensor with 5.5V max supply voltage, 1mT hysteresis, and 0.30V output range. Ideal for applications requiring Hall effect sensors in a compact rectangular package for surface mount installations at temperatures ranging from -40 to 85°C.
AH1806-Z-7
AH1806-Z-7 by Diodes Inc. is a magnetic field sensor with a voltage output and open-drain configuration. It operates within a temperature range of -40 to 85°C and has a max supply voltage of 5.5V. This sensor, which is mounted on the surface, is commonly used in applications that require precise measurement and detection of magnetic fields.
AH180-PG-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.30V; Maximum Magnetic Field Range: 6 mT;
AH1807-P-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.30V; Hysteresis: 1.5 mT;
AH1809-P-B
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.30V; Maximum Operating Temperature: 125 Cel;
AH1889-Z-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.20-1.60V;
AH1892-Z-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.2-1.6V;
AH1802-FJG-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.30V;
AH1887-ZG-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.2-1.6V;
AH1804-W-7
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.20-3.10V;
AH1806-P-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 2.235 inch; Minimum Supply Voltage: 2.5 V;
AH1806-P-B
AH1806-P-B by Diodes Inc. is a Hall effect magnetic field sensor with 2.5V to 5.5V supply voltage range, hysteresis of 1mT, and -40°C to 85°C operating temperature. Ideal for applications requiring precise voltage output based on magnetic field strength in the range of 0.4mT to 4.5mT.
AH1807-P-B
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.30V; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved