Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Width: 1.6 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Programmable Logic Devices (PLD) SLG46127MTR attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Dialog Semiconductor
Programmable IC Type:
In-System Programmable:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Architecture:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
JESD-30 Code:
JTAG Boundary Scan Test:
SLG46127MTR Programmable ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOKYO, Japan, August 31, 2021 JST | LONDON, United Kingdom, August 31, 2021 ― Renesas Electronics Corporation (TSE: 6723, “Renesas”), a premier supplier of advanced semiconductor solutions, and Dialog Semiconductor Plc (“Dialog”), a leading provider of battery and power management, Wi-Fi, Bluetooth® low energy and Industrial edge computing solutions, today announced the successful completion of Renesas’ acquisition of the entire issued and to be issued share capital of Dialog. Renesas will fund the cash consideration payable to Dialog shareholders of approximately EUR 4.8 billion (approximately 624.0 billion yen at an exchange rate of 130 yen to the Euro) through a combination of debt, cash on hand and the proceeds of an equity offering of approximately 222.6 billion yen.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
1554216002
Molex
WIRE AND CABLE;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
ATF22V10CQZ-20SU-T
Microchip Technology
ATF22V10CQZ-20SU-T by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, ideal for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style.
M4A5-96/48-7VNC
Lattice Semiconductor
M4A5-96/48-7VNC by Lattice Semiconductor is a PLD with 96 macro cells, 48 I/O lines, and 7.5 ns propagation delay. It uses CMOS technology and is in-system programmable, making it ideal for applications requiring high clock frequencies up to 76.9 MHz. The device comes in a square plastic/epoxy package with gull wing terminals and operates within a temperature range of 0 to 70°C.
EPM240T100A5N
Intel
EPM240T100A5N by Intel is a PLD with 192 macro cells, 80 inputs/outputs, and 7.5ns propagation delay. It uses CMOS technology, has a max supply voltage of 2.625V, and is in-system programmable. Ideal for automotive applications due to its high operating temperature range of -40 to 125°C and JTAG boundary scan test capability.
EPM240T100I3
Altera
The EPM240T100I3 by Altera is a programmable logic device with 192 macro cells. It has a propagation delay of 4.7 ns and uses CMOS technology. This surface mount device comes in a QFP package with 100 terminals and is in-system programmable. Its features include JTAG boundary scan test and a peak reflow temperature of 220°C.
EP1K50TC144-2N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XC2C64A-7PC44C
Xilinx
XC2C64A-7PC44C by Xilinx is a 64-macrocell FLASH PLD with 7.5 ns propagation delay, operating at up to 200 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing, it features a max supply voltage of 1.9 V and operates within a temperature range of 0 to 70°C.
EPM3032ATC44-4
EPM3032ATC44-4 by Intel is a 32 macrocell EE PLD with 4.5 ns propagation delay and 227.3 MHz max clock frequency. Ideal for applications requiring in-system programmability, it operates at a max temp of 70°C with a supply voltage range of 3-3.6 V, featuring JTAG boundary scan test capability.
5M240ZT100I5N
5M240ZT100I5N by Intel is a FLASH PLD with 192 macro cells, 79 I/O lines, and a max clock frequency of 118.3 MHz. It is used in industrial applications requiring programmable logic devices with fast propagation delay and in-system programmability.
LCMXO640C-3TN100C4W
LCMXO640C-3TN100C4W by Lattice Semiconductor is a PLD with 640 logic cells, 74 I/O lines, and 4.9 ns propagation delay. Ideal for applications requiring high-speed processing and low power consumption in compact designs.
EPM3256AQC208-10N
The Altera EPM3256AQC208-10N is a programmable logic device with 256 macro cells. It has a maximum supply voltage of 3.6V and a propagation delay of 10ns. This CMOS technology-based device is in a square package shape with gull-wing terminals. It is in-system programmable and has an output function of macrocell. The device operates at temperatures between 0°C to 70°C and has a maximum clock frequency of 95.2MHz.
LC4256V-75TN144E
LC4256V-75TN144E by Lattice Semiconductor is a 256 macrocell EE PLD with 110 inputs and 96 I/O lines. Featuring a propagation delay of 7.5 ns, it operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in compact designs.
XC2C384-10TQ144I
XC2C384-10TQ144I by Xilinx is a 384 macrocell FLASH PLD with 118 I/O lines, operating at 83 MHz. It features a propagation delay of 10 ns and can be used in industrial applications requiring programmable logic devices with in-system programmability.
EPM3256ATI144-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
5M570ZF256I5N
Intel's 5M570ZF256I5N is a FLASH PLD with 440 macro cells, 159 I/O lines, and max clock frequency of 118.3 MHz. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan test capability. Operating temperature range from -40 to 100°C makes it suitable for various environments.
5M2210ZF324C5N
Intel 5M2210ZF324C5N is a FLASH PLD with 1700 macro cells, 271 I/O lines, and 201.1 MHz clock frequency. Ideal for applications requiring high-speed data processing and complex logic functions in electronic systems.
XCR3128XL-10VQG100I
Xilinx XCR3128XL-10VQG100I is a 128 macrocell EE PLD with 84 I/O lines. It operates at max clock frequency of 95 MHz, with propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
EP1K50QC208-3
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
ATF22V10CQZ-20SU
ATF22V10CQZ-20SU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style for efficient integration into electronic systems.
SLG47004V
Renesas Electronics
SLG47004V by Renesas Electronics is a 20 macrocell OT PLD with 8 inputs and 7 I/O lines. Operating at 2.4-5.5 V, it's in-system programmable and has a max temp of 85°C. Ideal for applications requiring a compact, low-profile programmable logic device with versatile input/output functions.
XC95144XL-7TQG100I
Xilinx XC95144XL-7TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines, operating at max 138.88 MHz clock frequency. It has a propagation delay of 7.5 ns and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Dialog Semiconductor
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved