Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Sensors/Transducers; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Power Supplies (V): 3/5; Temperature Coef (ppm/Cel): POSITIVE; Terminal Finish: Tin/Lead (Sn/Pb);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Other Function Sensors & Transducers DS60XTR attributes and parameters. Explore more Other Function Sensors & Transducers devices from Dallas Semiconductor
JESD-609 Code:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
International Devices
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Plessey Semiconductors Discrete Components Div
Synsemi
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BMA253
Robert Bosch
BMA253 by Robert Bosch is an accelerometer sensor with a supply voltage range of 1.62V to 3.6V and digital output voltage ranging from 0.48V to 1.92V. With a compact square body measuring 2mm in length and width, it is ideal for applications requiring precise motion detection in tight spaces at temperatures b/w -40°C to 85°C.
DS1631Z/TR
Dallas Semiconductor
DS1631Z/TR by Dallas Semiconductor is an 8-terminal sensor with a power supply of 3/5V. It operates b/w -55°C to 125°C, drawing a max current of 1.25mA. This rectangular surface mount package is ideal for temperature sensing applications in various industries.
MCR1101-50-3
Aceinna
Aceinna's MCR1101-50-3 is a plastic/epoxy current sensor with 16 terminals. It operates b/w -40 to 105°C, producing an analog voltage output via open-drain configuration. Ideal for surface mount applications due to its compact size of 10.21mm x 7.5 inch x 2.34mm dimensions.
LESR15-NP/SP1
Lem International Sa
CURRENT SENSOR;
TMCS1101A3BQDT
TMCS1101A3BQDT by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.
AD590JH
Thomson Consumer Electronics
Other Sensors/Transducers; No. of Terminals: 3; Temperature Coef (ppm/Cel): POSITIVE; Package Body Material: METAL; Package Equivalence Code: CAN3/4,.1; Power Supplies (V): 5;
TMCS1108A3UQDT
TMCS1108A3UQDT by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and outputting analog voltage. It has a compact rectangular package suitable for surface mount applications. With temperature range from -40 to 85°C, it's ideal for precise current monitoring in various electronic systems.
AD590MF
General Electric Solid State
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Temperature Coef (ppm/Cel): POSITIVE; Power Supplies (V): 5; Terminal Finish: Tin/Lead (Sn/Pb);
ACS770KCB-150U-PSF-T
Allegro MicroSystems
ACS770KCB-150U-PSF-T by Allegro MicroSystems is a current sensor with 5V power supply, AEC-Q100 screening level, and single-ended output circuit. It operates b/w -40°C to 125°C, ideal for automotive applications due to its BICMOS technology and through-hole mounting feature.
LESR15-NP
LESR15-NP by Lem International Sa is a CURRENT SENSOR with 14 terminals, output voltage range of 0.25-4.75V, and operates b/w -40 to 105 °C. It has a rectangular shape, measures 13.4" in width, and is designed for board mounting applications.
AD590LF/883B
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Package Equivalence Code: FLAT,2PIN,.05LS; Temperature Coef (ppm/Cel): POSITIVE; Screening Level: 38535Q/M;38534H;883B;
FX1901-0001-0050-L
TE Connectivity
FORCE SENSOR; Maximum Operating Temperature: 50 Cel; Maximum Supply Voltage: 5 V; Minimum Operating Temperature: 0 Cel; Maximum Accuracy (%): 1;
IS31SE5104-QFLS2-TR
Integrated Silicon Solution
IS31SE5104-QFLS2-TR by Integrated Silicon Solution is a touch sensor with 16 terminals. It has a max supply voltage of 5.5V and operates in temperatures ranging from -40 to 85°C. This surface mount sensor is commonly used for various applications requiring touch sensing capabilities.
LXSR15-NPS
LXSR15-NPS by Lem International Sa is a current sensor with output voltage range of 0.25-4.75V, suitable for applications requiring precise current monitoring. It operates b/w -40 to 105°C temperature range and has a compact rectangular body measuring 21.91x13.4x23.2 mm (LxWxH). With 10 terminals and through-hole mounting feature, it can be easily integrated into various systems for accurate current sensing.
CSCA0500A000B15B01
Honeywell Sensing And Control
CSCA0500A000B15B01 by Honeywell Sensing And Control is a current sensor with a voltage output. It has a max supply voltage of 15.75V and an accuracy of 2%. This sensor is commonly used in applications that require monitoring and measuring electrical currents.
LF1010-S
LF1010-S by Lem International Sa is a current sensor with 0.4% accuracy, 14.25-25.2V supply voltage range, and -40 to 85°C operating temperature. Ideal for panel mounting applications requiring precise current output measurements in various industries.
NJR4266F2A1
New Japan Radio
SENSOR MODULE;
L18P003S05R
Tamura
Other Sensors/Transducers;
ACS711KEXLT-30AU-T
ACS711KEXLT-30AU-T by Allegro MicroSystems is a current sensor with 12 terminals. It operates b/w -40°C to 125°C, with a supply voltage range of 3V to 5.5V. This square-shaped sensor outputs analog voltage and is ideal for surface mount applications.
ACS723LLCTR-40AB-T
Allegro MicroSystems' ACS723LLCTR-40AB-T is a current sensor with 8 terminals, operating from -40 to 150°C. It offers analog voltage output, BICMOS technology, and a supply voltage range of 4.5V to 5.5V. Ideal for surface mount applications in various industries requiring precise current monitoring.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved