Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$7.787
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
$6.920
100+ parts
$5.190
1k+ parts
$4.500
10k+ parts
-
Nova Conductors
$12.780
Chip Stock
Digiode
Vyrian
Anansix
Dan-Mar Components
Zilex Electronics Inc.
Prism Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Bristol Electronics
Atlantic Semiconductor
Sea View Technologies
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Component Sense
ComSIT Distribution GmbH
Q Components
MRC Electronics
J & M Industries LLC
Connector Distribution Corp
Right Parts Inc.
Continental Prestige Electronics
$12.524
AZTECH Wire
$19.213
Corohmni
$26.428
Semicontronic
$27.000
$26.325
$26.190
One Stop Electronics
$34.000
Modulus Dynamics
$40.493
MARBEL Systems
$53.080
$50.957
Texas Native Microelectronics
$61.012
$58.572
$56.741
Kenton Components
$73.214
$64.429
RC Electronics
$13.630
$12.860
$12.600
Glotronic Ltd.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Argo Parts USA
Corphita
Perfect Parts
Metaverse IC Inc.
Kepictronics
Vigor
Microchip USA
Netroflash
$12.141
$11.885
Qasali Group International
$158.143
$144.965
Timers & Real-Time Clocks DS1687-3 attributes and parameters. Explore more Timers & Real-Time Clocks devices from Dallas Semiconductor
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Clock Frequency:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
RAM Words:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Volatile:
Peripheral IC Type:
DS1687-3 Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
PCF8523TK/1,118
PCF8523TK/1,118 by NXP Semiconductors is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates b/w -40 to 85 °C and supports interrupt capability. With a small outline package, it's ideal for industrial applications requiring precise timekeeping at up to 0.032 MHz clock frequency.
ID82C54
Renesas Electronics
Renesas Electronics' ID82C54 is a 16-bit timer IC with 3 timers, operating at max 8MHz clock frequency. It features parallel access method and CMOS technology, suitable for industrial applications requiring precise timing functions. The package style is in-line with dual terminals and a supply voltage range of 4.5V to 5.5V.
DS1672S-33+T&R
Maxim Integrated
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MCP79410-I/SN
MCP79410-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C max temp. Ideal for industrial timers & real-time clocks with 64 RAM words and interrupt capability. Small outline package, suitable for surface mount applications.
DS3232SN#-W
DS3232SN#-W by Analog Devices is a Real-Time Clock with I2C interface, 236 RAM words, and interrupt capability. It operates b/w -40 to 85°C, ideal for time-sensitive applications in various industries. The small outline package with gull wing terminals makes it suitable for space-constrained designs.
PCA21125T/Q900/1
PCA21125T/Q900/1 by NXP Semiconductors is a small outline timer and real-time clock IC with 14 terminals. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 1.3V to 5.5V, it features a compact rectangular package design ideal for surface mount assembly.
DS12885SN+TR
DS12885SN+TR by Analog Devices is a CMOS RTC with 24 terminals, operating from -40 to 85 °C. It has an external data bus width of 8 bits and supports interrupt capability. Ideal for industrial applications requiring accurate timekeeping and interrupt functions in a compact small outline package.
PCF2129AT
PCF2129AT by NXP Semiconductors is a small outline timer and real-time clock with I2C access method. It operates at a supply voltage range of 1.8V to 4.2V and can withstand temperatures from -40°C to 85°C. This industrial-grade device is commonly used in applications requiring precise timekeeping and scheduling functions.
DS1687-3
Dallas Semiconductor
DS1392U-33
DS1392U-33 by Maxim Integrated is a 10-terminal timer/real-time clock IC with 3.3V supply, I2C access, and interrupt capability. It operates in industrial temperatures (-40 to 85°C) and has a max clock frequency of 0.032 MHz. Ideal for applications requiring precise timekeeping in compact designs.
ISL12057IBZ-T
ISL12057IBZ-T by Renesas Electronics is a CMOS timer/real-time clock IC with I2C access, operating b/w -40 to 85°C. It has a supply voltage range of 1.8-3.6V and a clock frequency of 0.032 MHz, making it suitable for industrial applications requiring precise timekeeping in compact designs. This small-outline package with dual terminals is surface-mountable and has a moisture sensitivity level of 2.
PCA85073ADP/Q900Z
NXP Semiconductors' PCA85073ADP/Q900Z is an 8-terminal IC with I2C access, operating at a clock frequency of 0.032768 MHz. It serves as a timer and real-time clock in industrial applications, with a supply voltage range of 1.8V to 5.5V and temperature range from -40°C to 105°C.
ISL12020MIRZ
Intersil
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HLSON; Package Shape: RECTANGULAR;
RX-8564LC:B3:PURESN
Seiko Epson
RX-8564LC:B3:PURESN by Seiko Epson is a small outline timer and real-time clock IC with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.8V to 5.5V. This CMOS technology device has a rectangular shape, measures 3.6mm in length, and features dual terminals with J bend form factor.
RTC-72423A0:ROHS
RTC-72423A0:ROHS by Seiko Epson is a CMOS timer & real-time clock with 24 terminals. It operates b/w -40 to 85°C, with a supply voltage of 4.5-5.5V. Suitable for industrial applications, it features parallel access and surface mount capability.
DS1390U-18+
DS1390U-18+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 3-WIRE access. It operates at 1.71V to 1.89V, suitable for INDUSTRIAL applications. This small outline device has a clock frequency of 0.032 MHz and can withstand temperatures from -40°C to 85°C.
BQ32000D
Texas Instruments
BQ32000D by Texas Instruments is a CMOS timer/real-time clock IC with I2C bus compatibility. It operates b/w -40 to 85°C, with supply voltage of 3-3.6V and clock frequency up to 0.032 MHz. Ideal for applications requiring precise timekeeping in industrial settings due to its small form factor and low power consumption.
MCP79520-I/MSVAO
MCP79520-I/MSVAO by Microchip Tech is a small outline, thin profile RTC with SPI interface. It operates b/w -40 to 85°C, has 64 RAM words, and supports interrupt capability. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS1338U-33
DS1338U-33 by Maxim Integrated is a CMOS TIMER/REAL TIME CLOCK with I2C access, 3.3V supply, and 0.032 MHz clock frequency. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for surface mount applications.
PCF8563TS/4
PCF8563TS/4 by NXP Semiconductors is a CMOS timer and real-time clock with I2C interface. It operates b/w -40 to 85 °C, with supply voltage range of 1.8-5.5 V. Suitable for industrial applications, it features interrupt capability and small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS1682S/T&R
DS1682S/T&R by Maxim Integrated is a small outline timer IC with 8 terminals, operating at 3-5V. It utilizes I2C interface for serial communication, has interrupt capability, and can record time in seconds. Ideal for industrial applications requiring precise timekeeping in a compact form factor.
DS1682S+T&R
TIMER, TIME RECORDER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Analog Devices' DS1682S+T&R is a CMOS timer with 8 terminals, I2C access, interrupt capability, and operates b/w -40 to 85°C. It's a small outline package suitable for industrial applications requiring time recording and timing functions at frequencies up to 0.4 MHz.
DS1682S+
Analog Devices' DS1682S+ is a CMOS timer with 8 terminals, I2C access, and interrupt capability. It operates b/w -40 to 85°C, suitable for industrial applications like time recording due to its small outline package and low power consumption at 3-5V supply voltage.
DS1682S
DS1682S by Maxim Integrated is a SERIAL, 2-WIRE/I2C timer with interrupt capability. Operating at 3-5V, it has a clock frequency of 0.4 MHz and is ideal for industrial applications requiring time recording and timing functions. This small outline package IC features a temperature range of -40 to 85°C and is surface mountable.
DS1682S/GG8
TIMER, TIME RECORDER;
DS1683S+T&R
Analog Devices' DS1683S+T&R is a CMOS timer with I2C access, 8 terminals, interrupt capability, and industrial temperature grade. It operates b/w -40 to 85 °C with supply voltage range of 2.5-5.5 V. Ideal for applications requiring programmable timers in small outline packages.
TIMER, PROGRAMMABLE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS1683S+
DS1672S-33+
DS1672S-33
DS1672S-33/T&R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved