Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Vyrian
Digiode
Lantek
Semi Source
ACDS - Activité Composants Distribution Service
Prism Electronics
LittleDiode
Electronic Expediters
Electronics Depot
AZTECH Wire
$14.673
One Stop Electronics
$18.000
Semicontronic
$19.000
$18.525
$18.430
Corohmni
$38.550
Modulus Dynamics
$38.607
MARBEL Systems
$44.759
$42.969
Texas Native Microelectronics
$51.447
$45.273
Kenton Components
$61.736
$54.328
Qasali Group International
$138.907
$122.238
Continental Prestige Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Corphita
Argo Parts USA
Bastille Electronics
Microchip USA
Futuretech Components
GreenTree Electronics
Kepictronics
Perfect Parts
Eliminating Global Boundries, Inc
Cyclops Electronics Ltd (Excess)
Timers & Real-Time Clocks DS1244Y-70 attributes and parameters. Explore more Timers & Real-Time Clocks devices from Dallas Semiconductor
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Volatile:
Peripheral IC Type:
DS1244Y-70 Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Grande Electronics
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Db Lectro
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Sensitron Semiconductor
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ISL12022MAIBZ
Renesas Electronics
ISL12022MAIBZ by Renesas Electronics is a CMOS TIMER & REAL TIME CLOCK with I2C SERIAL access. It operates b/w -40 to 85 °C, suitable for INDUSTRIAL applications. This 20-terminal device has a supply voltage range of 2.7V to 5.5V and compact dimensions of 12.8mm x 7.5mm x 2.65mm, making it ideal for space-constrained designs.
CP82C54-12Z
Intersil
TIMER, PROGRAMMABLE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
PCF2123BS/1,118
NXP Semiconductors
NXP Semiconductors' PCF2123BS/1,118 is an 8-bit timer & real-time clock IC with a serial, 3-wire interface. Operating voltage range of 1.1-5.5V and industrial temperature grade (-40 to 85°C). Suitable for applications requiring precise timekeeping in compact designs.
MCP79400-I/SN
MCP79400-I/SN by Microchip Technology is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates at 1.8-5.5V, has 64 RAM words, and supports interrupts. Ideal for industrial applications with temp range -40 to 85°C, it comes in small outline package measuring 4.9mm x 3.9mm and consumes max 3mA supply current.
DS1307ZN
Dallas Semiconductor
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PCF2131TFY
PCF2131TFY by NXP Semiconductors is a CMOS timer and real-time clock with I2C access method. It has a max supply voltage of 5.5V and operates in an industrial temperature range (-40 to 85°C). This compact package (4.5mm length, 3.5mm width) is suitable for various applications requiring precise timing and scheduling functions.
DS1338U-33+
Analog Devices
DS1338U-33+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 3.3V, has 8 terminals, and supports a clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in a compact package.
ISL1208IU8Z-T7A
ISL1208IU8Z-T7A by Renesas Electronics is a real-time clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, suitable for industrial applications requiring precise timekeeping in compact designs. With a low supply current of 0.004 mA and small form factor, it's ideal for space-constrained electronic devices.
STWD100YNYWY3F
STMicroelectronics
STWD100YNYWY3F by STMicroelectronics is a CMOS TIMER with 5V nominal voltage, AEC-Q100 screening level, and -40 to 125 °C operating temperature range. It is designed for automotive applications, featuring a small outline package style and dual terminal position.
DS1306E+T&R
Maxim Integrated
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
Z84C3006PEG
IXYS Corporation
Z84C3006PEG by IXYS Corp is an 8-bit timer IC with a clock frequency of 6.17 MHz, operating b/w -40°C to 100°C. It has 28 terminals in a rectangular package suitable for applications requiring programmable timers and real-time clocks.
PCF85063TP-ARD
TIMER, REAL TIME CLOCK; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
RTC-72423A-3
Epson Toyocom
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
X1226S8IZ
PCA8565TS
PCA8565TS by NXP Semiconductors is a CMOS peripheral IC with I2C access method, suitable for automotive applications. It operates b/w -40 to 125 °C and supports interrupt capability. The package is small outline, thin profile, with shrink pitch and has 8 terminals in gull wing form.
PCF8563T/5
NXP Semiconductors' PCF8563T/5 is an I2C RTC with 1.8-5.5V supply, -40 to 85°C temp range, and 0.032 MHz clock frequency. Ideal for industrial applications requiring a compact form factor and precise timekeeping capabilities.
CS82C54-10
TIMER, PROGRAMMABLE; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
PCF2129AT/1,518
PCF2129AT/1,518 by NXP Semiconductors is a CMOS timer with 20 terminals and SPI access method. It operates b/w -40 to 85°C, suitable for industrial applications. This real-time clock IC has interrupt capability and volatile memory refresh function.
1338-31DCGI8
Integrated Device Technology
DS1391U-33+
DS1391U-33+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with 3.3V supply, 10 terminals, and 0.032 MHz clock frequency. It operates in industrial temperature range (-40 to 85 °C) and uses SERIAL, 3-WIRE access method. Ideal for applications requiring interrupt capability and precise timekeeping in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS12887A
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
DS12887A+
DS12887A by Maxim Integrated is a TIMER & REAL TIME CLOCK with 24 terminals. It operates at 5V, with max supply voltage of 5.5V and min of 4.5V. Access method is PARALLEL/MUXED BUS, suitable for applications requiring precise timekeeping in commercial temperature range.
DS12887A+ by Analog Devices is a CMOS TIMER with 24 terminals, operating at 5V. It has a max clock frequency of 0.032 MHz and can handle interrupt capability. Ideal for applications requiring real-time clock functions in commercial temperature environments.
DS12887+
DS12887
DS12887 by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with 24 terminals. It operates b/w 0-70 °C, with supply voltage of 4.5-5.5 V. Access via PARALLEL, MUXED BUS makes it ideal for applications requiring precise timekeeping and interrupt capability.
DS12887+ by Analog Devices is a CMOS TIMER with 24 terminals, operating at 5V. It has interrupt capability and supports parallel/muxed bus access method. Ideal for real-time clock applications with a max clock frequency of 0.032 MHz and temperature range from 0 to 70 °C.
DS12C887+
DS12C887
DS12CR887-33
DS12CR887-33 by Maxim Integrated is a CMOS timer/RTC with 8-bit data bus, 3.3V supply, and 0.032 MHz clock frequency. It operates in industrial temperature range (-40 to 85 °C) and has interrupt capability for parallel/muxed bus access. Ideal for applications requiring precise timekeeping in harsh environments.
DS12CR887-33+
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
DS12C887A
DS12C887A by Maxim Integrated is a CMOS timer and real-time clock with parallel and muxed bus access methods. It operates at a max supply voltage of 5.5V and has a temperature range of 0 to 70°C. This IC is commonly used in applications requiring precise timekeeping and scheduling functions.
DS12C887A+
DS12C887A+ by Analog Devices is a CMOS timer and real-time clock with parallel and muxed bus access methods. It operates at a max supply voltage of 5.5V and has a temperature range of 0 to 70°C. This IC is commonly used in applications requiring precise timekeeping and scheduling functions.
DS1244YP-100
TIMER, REAL TIME CLOCK; Temperature Grade: COMMERCIAL; Terminal Form: J INVERTED; No. of Terminals: 34; Package Shape: RECTANGULAR; Maximum Supply Voltage: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved