Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cts 4700-003LF is a Data Line Filter with 100V rated voltage, 10A current rating, and 70dB max insertion loss. Ideal for noise suppression in electronic devices due to its high inductance of 100000uH and capacitance of 2000uF. With compact dimensions of L8XB2.29XH2.29 (mm), it's suitable for surface mount applications in various electronic circuits.
Median Price
$2.612
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Element14
1+ parts
$1.919
100+ parts
$1.328
1k+ parts
$1.306
10k+ parts
$1.291
Farnell
$3.306
$2.515
$2.272
$2.068
Newark
$3.580
$2.630
$1.750
-
Avnet
$0.811
Nova Conductors
$1.984
Odi Ramu Company
Sensible Micro Corp
Semi Source
Vyrian
Aranea Global
$1.944
$1.866
Argo Parts USA
Aztec Data Supply Inc.
$3.370
Continental Prestige Electronics
$4.390
$3.170
$2.590
Kepictronics
High insulation resistance ensures reliable and safe operation of the data line filter.
Suitable for use in various electronic devices with moderate voltage requirements.
Specifically designed to filter out unwanted noise and interference from data lines.
Can withstand high temperatures, making it ideal for demanding environments.
Provides good conductivity and corrosion resistance for reliable connections.
High inductance value helps in filtering out noise from data lines effectively.
Compact size allows for easy integration into electronic circuit designs.
High insertion loss value indicates strong noise suppression capabilities.
Standard length for compatibility with various mounting configurations.
Convenient packing options for both automated manufacturing and bulk orders.
Surface mount design facilitates easy installation on circuit boards.
Compact dimensions ensure space-saving integration in electronic assemblies.
High current rating allows for reliable performance in various applications.
Low profile design for efficient use of space on circuit boards.
Provides additional filtering for smoothing out signal noise.
Data Line Filters 4700-003LF attributes and parameters. Explore more Data Line Filters devices from Cts
Capacitance:
Filter Type:
Height:
Inductance:
Maximum Insertion Loss:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
4700-003LF Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Dc Components
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Silicon Standard
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
744822222
Wuerth Elektronik & Kg
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
SRF4532-510Y
Bourns
Bourns SRF4532-510Y is a Data Line Filter with 51uH inductance, 10 Mohm min insulation resistance, and 0.2A rated current. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C with a max voltage of 50V.
744822120
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
NFA31CC102R1E4D
Murata Manufacturing
NFA31CC102R1E4D by Murata Manufacturing is a data line filter with 4 functions and a rated voltage of 25V. It has a capacitance of 1000uF and is commonly used in applications requiring noise suppression and EMI filtering.
BLM31PG601SN1
Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
BLM18BB121SN1D
BLM18BB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
TLC/2.5A-101M-00
Fastron Electronics
Fastron Electronics' TLC/2.5A-101M-00 is a 100uH data line filter with 2 terminals, AEC-Q200 approval, and -55 to 115°C operating range. Ideal for applications requiring 2.5A rated current, it offers low 0.06 ohm DC resistance and through-hole mounting in a compact 14x31mm size.
742792621
Wurth Elektronik 742792621 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.2 ohm. Ideal for applications requiring surface mount filters in automotive electronics.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
2425-001-X5U0-102AALF
Cts
Cts 2425-001-X5U0-102AALF is a FEED THROUGH CAPACITOR with 1000uF capacitance, 100V rated voltage, and 2 terminals. It operates b/w -55 to 125 °C and has a min insulation resistance of 10,000 Mohm. Ideal for PCB mounting in data line filtering applications.
BLM18BB221SN1D
Murata Manufacturing's BLM18BB221SN1D is a chip bead data line filter with 2 terminals, rated for 0.45A current and 220Ω output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100MHz with a max DC resistance of 0.45Ω.
MPZ2012S101ATD25
TDK
TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
BLM18KG300TN1D
Murata Manufacturing's BLM18KG300TN1D is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has a DC resistance of 0.01 ohm and output impedance of 30 ohm.
7448262013
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
MPZ2012S101A
The TDK MPZ2012S101A is an 0805 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.02 ohm and output impedance of 100 ohm at 100 MHz. Ideal for surface mount applications, it provides effective filtering in electronic circuits requiring noise suppression.
LFBK1608HS601-T
Taiyo Yuden
LFBK1608HS601-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.35A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications.
MPZ1608D101BTD25
TDK's MPZ1608D101BTD25 is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 100 ohms and max DC resistance of 0.15 ohm. Ideal for data line filtering applications due to its compact size and operating temperature range from -55°C to 125°C.
MMZ2012R102AT
The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.
BLM18EG221TN1D
Murata Manufacturing's BLM18EG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a DC resistance of 0.15 ohm and output impedance of 300 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications requiring a rated current of 1A in filtering electronic signals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
4700-008LF
Tusonix
DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Inductance: .1 uH; Capacitance: 4000 uF; Length: 8 mm;
DATA LINE FILTER; Rated Current: 10 A; Inductance: .1 uH; Dimensions: L8XB2.29XH2.29 (mm)/L0.315XB0.09XH0.09 (inch); Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
4700-003LF
DATA LINE FILTER; Rated Current: 10 A; Minimum Insulation Resistance: 10000 Mohm; Capacitance: 2000 uF; Mounting Type: SURFACE MOUNT; No. of Functions: 1;
4700-008MLF
Cts 4700-008MLF is a Data Line Filter with 10A rated current, 100V voltage rating, and 70dB max insertion loss. Ideal for IEC-approved applications requiring high insulation resistance and 0.1uH inductance.
DATA LINE FILTER; Rated Current: 10 A; Packing Method: TAPE AND REEL; Rated Voltage: 100 V; Inductance: .1 uH; Terminal Finish: Matte Tin (Sn);
4700-003
DATA LINE FILTER; Rated Current: 10 A; Output Impedance (ohm): 50 OHM; Dimensions: L8XB2.29XH2.29 (mm)/L0.315XB0.09XH0.09 (inch); JESD-609 Code: e0; Manufacturer Series: 4700;
4700-005
DATA LINE FILTER; Rated Current: 10 A; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Inductance: .1 uH; Output Impedance (ohm): 50 OHM;
4700-006LF
DATA LINE FILTER; Rated Current: 10 A; Dimensions: L8XB2.29XH2.29 (mm)/L0.315XB0.09XH0.09 (inch); Rated Voltage: 100 V; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT;
4700-005LF
DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 125 Cel; Rated Voltage: 100 V; Packing Method: TAPE AND REEL; BULK; Height: 2.29 mm;
4700-009LF
DATA LINE FILTER; Rated Current: 10 A; Width (mm): 2.29; Additional Features: PI-TYPE CIRCUIT; Manufacturer Series: 4700; No. of Functions: 1;
DATA LINE FILTER; Rated Current: 10 A; Mounting Type: SURFACE MOUNT; Inductance: 100000 uH; Manufacturer Series: 4700; JESD-609 Code: e0;
4700-008
DATA LINE FILTER; Rated Current: 10 A; Width (mm): 2.29; JESD-609 Code: e0; Additional Features: PI-TYPE CIRCUIT; Maximum Insertion Loss: 70 dB;
4700-008TLF
DATA LINE FILTER; Rated Current: 10 A; Capacitance: 4000 uF; Packing Method: TAPE AND REEL; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
DATA LINE FILTER; Rated Current: 10 A; Rated Voltage: 100 V; Length: 8 mm; Terminal Finish: MATTE TIN; Capacitance: 470 uF;
DATA LINE FILTER; Rated Current: 10 A; Minimum Insulation Resistance: 10000 Mohm; Capacitance: 1000 uF; JESD-609 Code: e4; Dimensions: L8XB2.29XH2.29 (mm)/L0.315XB0.09XH0.09 (inch);
DATA LINE FILTER; Rated Current: 10 A; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT; Minimum Insulation Resistance: 10000 Mohm; Length: 8 mm;
4700-003MLF
DATA LINE FILTER; Rated Current: 10 A; Dimensions: L8.0XB2.29XH2.29 (mm)/L0.315XB0.09XH0.09 (inch); Rated Voltage: 100 V; Width (mm): 2.29; Inductance: .1 uH;
4700-003TLF
DATA LINE FILTER; Rated Current: 10 A; Minimum Insulation Resistance: 10000 Mohm; Mounting Type: SURFACE MOUNT; Additional Features: PI TYPE CIRCUIT; TAPE; Capacitance: 2000 uF;
DATA LINE FILTER; Rated Current: 10 A; Additional Features: PI-TYPE CIRCUIT; Minimum Insulation Resistance: 10000 Mohm; Terminal Finish: MATTE TIN; Mounting Type: SURFACE MOUNT;
The Cts 4700-003MLF is a Data Line Filter with 10A rated current, 100V voltage, and 70dB max insertion loss. Ideal for IEC-approved applications requiring high insulation resistance and surface mount installation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved