Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cts 2499-003-X5U0-102PLF is a Data Line Filter with 10000 Mohm Insulation Resistance, 500V Rated Voltage, and 2 Terminals. It features FEED THROUGH CAPACITOR filter type, suitable for applications requiring up to 20A current and 1000uF capacitance. Ideal for panel mount setups in environments ranging from -55°C to 85°C.
Median Price
$12.440
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$5.300
100+ parts
$2.630
1k+ parts
-
10k+ parts
DigiKey
$10.660
$6.815
$6.122
TTI
$10.780
$9.810
$9.710
Newark
$10.340
$9.990
Mouser Electronics
$15.540
$11.470
$10.710
Richardson RFPD
$22.160
$8.630
Element14
$42.220
$28.390
Chip1Stop
$4.080
$4.030
Verical
$26.592
Rapid Electronics
$3.441
$2.895
Nova Conductors
$8.080
Electro Sonic
$19.810
$4.490
Vyrian
Cogito LLC
Sea View Technologies
Bristol Electronics
Continental Prestige Electronics
$4.100
$2.580
$2.490
Netroflash
$7.918
Argo Parts USA
Perfect Parts
Resion (Excess)
High insulation resistance ensures reliable performance and safety.
Suitable for use in applications with high voltage requirements.
Simple and easy to install with minimal terminals.
Effective in filtering out noise and interference for clean signal transmission.
Can withstand high temperatures without compromising performance.
Suitable for use in extreme cold conditions without issues.
Silver terminals provide excellent conductivity for efficient performance.
Panel mounting allows for secure and stable installation in various settings.
Capable of handling high current loads without issues.
High capacitance for effective filtering and noise suppression.
Data Line Filters 2499-003-X5U0-102PLF attributes and parameters. Explore more Data Line Filters devices from Cts
Additional Features:
Capacitance:
Filter Type:
Minimum Insulation Resistance:
JESD-609 Code:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Terminal Finish:
2499-003-X5U0-102PLF Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
M39029/58-360
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Lite-on Semiconductor
1N4148WS
Changzhou Starsea Electronics
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Synsemi
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Weitron Technology
BLM31SN500SZ1L
Murata Manufacturing
Murata's BLM31SN500SZ1L is a FERRITE CHIP filter with 2 terminals, rated for 12A current. It operates b/w -55°C to 150°C, with max DC resistance of 0.0016 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening and compact dimensions of L3.2xB1.6xH1.1 mm.
7427927112
Wuerth Elektronik & Kg
Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
FLTR75V05Z
Abb
FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).
74270055
Wurth Elektronik 74270055 is a FERRITE BEAD Data Line Filter with 225 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, suitable for noise suppression in electronic circuits. Featuring a diameter of 18.6mm and stud mount design, it's ideal for applications requiring effective filtering and impedance matching.
BK1005HM121-T
Taiyo Yuden
BK1005HM121-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM18HE152SN1J
Murata Manufacturing's BLM18HE152SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a frequency range from 100 MHz to 1000 MHz and an output impedance of 1500 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18KG601BH1D
Murata Manufacturing's BLM18KG601BH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 600 OHM and operates b/w -55 to 150 °C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
7427932
Wurth Elektronik 7427932 is a chip data line filter with 2 terminals, Ferrite Bead type, and 125°C max operating temp. Ideal for IEC-approved applications requiring filtering at frequencies b/w 25-100 MHz with low DC resistance of 0.0009 ohm. Suitable for surface mount installation in compact spaces due to its dimensions of L7.8xB4.75xH3.0 mm.
Ge Power Electronics
DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);
BLM18KG700TN1D
Murata Manufacturing's BLM18KG700TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With a max DC resistance of 0.022 ohm and output impedance of 70 ohm, it is ideal for applications requiring filtering at frequencies up to 100 MHz. This surface mount ferrite chip filter has dimensions of L1.6xB0.8xH0.6 mm and can handle a rated current of 3.5 A.
ILBB-0805ER301V
Vishay Intertechnology's ILBB-0805ER301V is a 2-terminal data line filter with FERRITE CHIP construction. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm, suitable for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequency range.
MMZ1608B102CTD25
TDK
TDK's MMZ1608B102CTD25 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used in automotive applications due to its AEC-Q200 screening level.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
MPZ1608Y101BTA00
TDK's MPZ1608Y101BTA00 is a 0603 chip bead filter with 2 terminals. With a max temp of 125°C and min of -55°C, it operates b/w 100 MHz to DC resistance of 0.04 ohm. Ideal for data line filtering, this ferrite chip measures L1.6xB0.8xH0.8 mm and has an output impedance of 100 OHM at 2A rated current.
SBSPP1000103MXT
Knowles Precision Devices
SBSPP1000103MXT by Knowles Precision Devices is a 100 V rated data line filter with inductance of 0.25 uH, max insertion loss of 60 dB, and max DC resistance of 0.5 ohm. It is ideal for surface mount applications requiring high capacitance filtering in a compact L3.2XB1.6XH1.6 mm package.
BLM18AG601SN1J
Murata Manufacturing's BLM18AG601SN1J is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -55 to 125 °C and has a max DC resistance of 0.38 ohm. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for applications requiring a 600 OHM output impedance at frequencies ranging from 100 MHz, packed in tape for surface mount installation.
FLTR100V10Z
FLTR100V10Z by Abb is a 10A data line filter module with CSA approval. It operates at -40 to 100°C, has 5 terminals, and a max DC resistance of 0.014 ohm. Ideal for applications requiring noise suppression in data lines.
742792021
742792021 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with dimensions of L2.0XB1.2XH0.9 (mm). It has a Max Operating Temperature of 125°C and Min Frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression and signal filtering up to 1000 MHz.
BLM18BB100SN1D
Murata's BLM18BB100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.1 ohm. Ideal for surface mount applications, it provides an output impedance of 10Ω, making it suitable for noise suppression in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2499-003-X5W0-103ZLF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Terminals: 2; JESD-609 Code: e4; Mounting Type: PANEL MOUNT; Minimum Insulation Resistance: 10000 Mohm;
Cts
Cts 2499-003-X5W0-103ZLF is a Data Line Filter with 10000 Mohm Insulation Resistance, 500V Rated Voltage, and 20A Rated Current. It features FEED THROUGH CAPACITOR filter type and is ideal for panel mount applications in temperatures ranging from -55 to 125 °C.
2499-003-X5S0-102MLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Capacitance: 1000 uF;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e4; Additional Features: C-TYPE CIRCUIT;
2499-003-X5U0-102PLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; JESD-609 Code: e4; Rated Voltage: 500 V; Mounting Type: PANEL MOUNT; Additional Features: C-TYPE CIRCUIT;
2499-003-X5U0-501MLF
FEED THROUGH CAPACITOR; No. of Functions: 1; Minimum Insulation Resistance: 10 Mohm; Minimum Operating Temperature: -55 Cel; No. of Terminals: 2; Rated Voltage: 500 V;
2499-003-X5U0-501M
FEED THROUGH CAPACITOR; Additional Features: C-TYPE CIRCUIT; WITH SILVER PLATED HEX NUT AND LOCK WASHER; Rated Voltage: 500 V; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 1; JESD-609 Code: e4;
2499-003-X5U0-102P
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Rated Voltage: 500 V; JESD-609 Code: e4; Minimum Insulation Resistance: 10000 Mohm;
2499-003-X5U0-102ZLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; Additional Features: C-TYPE CIRCUIT; Terminal Finish: Silver (Ag); Diameter (mm): 6.35;
2499-003-X5U0-102Z
FEED THROUGH CAPACITOR; Rated Current: 20 A; Minimum Operating Temperature: -55 Cel; Rated Voltage: 500 V; Maximum Operating Temperature: 85 Cel; Dimensions: D6.35XH3.96 (mm)/D0.25XH0.156 (inch);
2499-003-X5UO-102P
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; Minimum Operating Temperature: -55 Cel; Capacitance: 1000 uF; Terminal Finish: Silver (Ag);
2499-003-X5W0-10Z
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Additional Features: C-TYPE CIRCUIT; Minimum Insulation Resistance: 10000 Mohm; Manufacturer Series: 2499-003;
FEED THROUGH CAPACITOR; Minimum Operating Temperature: -55 Cel; Additional Features: C-TYPE CIRCUIT; WITH SILVER PLATED HEX NUT AND LOCK WASHER; Rated Voltage: 500 V; Minimum Insulation Resistance: 10 Mohm; Terminal Finish: Silver (Ag);
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; Mounting Type: PANEL MOUNT; Maximum Insertion Loss: 40 dB; Height: 11.88 mm;
2499-003-X5S0-151KLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); JESD-609 Code: e4; Capacitance: 150 uF; Maximum Operating Temperature: 85 Cel;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Minimum Insulation Resistance: 10000 Mohm; Dimensions: D6.35XH3.96 (mm)/D0.25XH0.156 (inch); Height: 3.96 mm; Manufacturer Series: 2499-003;
2499-003-X5W0-702ZLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; No. of Terminals: 2; Additional Features: C-TYPE CIRCUIT; JESD-609 Code: e4;
FEED THROUGH CAPACITOR; Capacitance: 500 uF; No. of Functions: 1; Rated Voltage: 500 V; Mounting Type: PANEL MOUNT; Minimum Insulation Resistance: 10 Mohm;
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; Capacitance: 1000 uF; JESD-609 Code: e4; Terminal Finish: Silver (Ag);
FEED THROUGH CAPACITOR; Rated Current: 20 A; Additional Features: C-TYPE CIRCUIT; Height: 3.96 mm; No. of Functions: 1; Mounting Type: PANEL MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved