Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cts 2499-003-X5S0-102MLF is a Data Line Filter with 10000 Mohm Min Insulation Resistance, 500 V Rated Voltage, and 1000 uF Capacitance. Ideal for applications requiring FEED THROUGH CAPACITOR filters in environments ranging from -55 to 85 °C.
Median Price
$27.950
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$24.160
1k+ parts
$19.260
10k+ parts
-
TTI
$28.240
DigiKey
$33.500
$24.168
Verical
$26.118
Future Electronics
$20.130
Nova Conductors
$5.015
Electro Sonic
$19.810
$4.490
Vyrian
IBS Electronics
$28.232
Continental Prestige Electronics
$4.915
Netroflash
Argo Parts USA
Perfect Parts
High insulation resistance ensures the safety and reliability of the product, making it suitable for long-term use without any risk of short circuits.
The high rated voltage capability makes this filter suitable for a wide range of applications, providing efficient filtering and protection against voltage fluctuations.
Having 2 terminals simplifies the installation process and makes it easier to connect the filter in various electronic setups.
The feed through capacitor design offers effective filtering of noise and interference, ensuring clean and stable power supply for connected devices.
The high maximum operating temperature allows this filter to perform reliably even in harsh environmental conditions without overheating or performance degradation.
The low minimum operating temperature ensures that this filter can be used in a wide range of temperature environments without any issues, making it versatile and reliable.
The silver terminal finish provides excellent conductivity and corrosion resistance, ensuring a stable and durable connection for the filter in various applications.
The panel mounting type makes installation easy and secure, allowing the filter to be securely mounted on a panel for convenient access and maintenance.
The high rated current capacity means this filter can handle heavy loads and provide effective filtering for high-power applications without any risk of overheating or performance issues.
The high capacitance value ensures effective filtering of noise and interference, providing clean and stable power supply for connected devices, making it a reliable choice for sensitive electronics.
Data Line Filters 2499-003-X5S0-102MLF attributes and parameters. Explore more Data Line Filters devices from Cts
Additional Features:
Capacitance:
Filter Type:
Minimum Insulation Resistance:
JESD-609 Code:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Terminal Finish:
2499-003-X5S0-102MLF Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
International Semiconductor
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Sangdest Microelectronics (Nanjing)
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SRF2012-900YA
Bourns
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
MPZ2012S101AT000
TDK
TDK's MPZ2012S101AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and rated current of 4A, suitable for surface mounting in various electronic devices.
ACT1210-510-2P-TL00
TDK's ACT1210-510-2P-TL00 is a Data Line Filter with 2 functions, 10 Mohm min. insulation resistance, and 80V rated voltage. AEC-Q200 screened, it operates b/w -40 to 150 °C and has an inductance of 51uH. Ideal for applications requiring noise suppression in automotive electronics.
BK1608HS220-TV
Taiyo Yuden
BK1608HS220-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 22 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L1.6xB0.8xH0.8 (mm) and surface mounting type.
NFW31SP106X1E4L
Murata Manufacturing
Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.
MMZ2012Y152BT000
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
2463-002-X5S0-471M
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;
NFE31PT222Z1E9B
Murata Manufacturing's NFE31PT222Z1E9B is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With dimensions of L3.2XB1.6XH1.6 (mm), it operates b/w -40 to 85 °C, making it ideal for applications requiring up to 6A rated current and 2200uF capacitance in surface mount configurations.
74279266
Wuerth Elektronik & Kg
Wurth Elektronik 74279266 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L1.6XB0.8XH0.8 (mm), it is ideal for surface mount applications in automotive electronics requiring high impedance filtering up to 140 MHz.
FBMH1608HM601-T
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
BKP1608HS121-T
BKP1608HS121-T by Taiyo Yuden is a 0603 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 85°C and min freq of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 120 ohm.
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
MMZ2012Y202BT
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
LI0805H121R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
MI0805L301R-10
Laird Technologies
MI0805L301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.06 ohm and rated current of 2 A.
CM2021Y330R-10
DATA LINE FILTER; Rated Current: 15 A; No. of Functions: 2; Length: 5.6 mm; Output Impedance (ohm): 33 OHM; Packing Method: TAPE AND REEL;
B82787C0513H002
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
FLT007A0Z
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Height: 12.2 mm; No. of Terminals: 5; Length: 25.41 mm; No. of Functions: 2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2499-003-X5W0-103ZLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Terminals: 2; JESD-609 Code: e4; Mounting Type: PANEL MOUNT; Minimum Insulation Resistance: 10000 Mohm;
Cts
Cts 2499-003-X5W0-103ZLF is a Data Line Filter with 10000 Mohm Insulation Resistance, 500V Rated Voltage, and 20A Rated Current. It features FEED THROUGH CAPACITOR filter type and is ideal for panel mount applications in temperatures ranging from -55 to 125 °C.
2499-003-X5S0-102MLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Capacitance: 1000 uF;
2499-003-X5U0-102PLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Rated Voltage: 500 V; JESD-609 Code: e4; Additional Features: C-TYPE CIRCUIT; No. of Functions: 1;
FEED THROUGH CAPACITOR; Rated Current: 20 A; JESD-609 Code: e4; Rated Voltage: 500 V; Mounting Type: PANEL MOUNT; Additional Features: C-TYPE CIRCUIT;
2499-003-X5S0-151KLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; No. of Terminals: 2; Maximum Operating Temperature: 85 Cel;
2499-003-X5S0-101MLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; JESD-609 Code: e4; No. of Functions: 1; Rated Voltage: 500 V; Mounting Type: PANEL MOUNT;
2499-003-X5S0-101M
FEED THROUGH CAPACITOR; Rated Current: 20 A; Rated Voltage: 500 V; Manufacturer Series: 2499-003; Minimum Insulation Resistance: 10000 Mohm; Capacitance: 100 uF;
2499-003-X5S0-152MLF
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; Additional Features: C-TYPE CIRCUIT;
2499-003-X5SO-151K
FEED THROUGH CAPACITOR; Rated Current: 20 A; JESD-609 Code: e4; No. of Functions: 1; Additional Features: C-TYPE CIRCUIT; Terminal Finish: Silver (Ag);
2499-003-X5S0-102M
FEED THROUGH CAPACITOR; Rated Current: 20 A; Rated Voltage: 500 V; Additional Features: C-TYPE CIRCUIT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Silver (Ag);
2499-003-X5S0-151K
FEED THROUGH CAPACITOR; Rated Current: 20 A; Rated Voltage: 500 V; Terminal Finish: Silver (Ag); Additional Features: C-TYPE CIRCUIT; Manufacturer Series: 2499-003;
2499-003-X5S0-152M
FEED THROUGH CAPACITOR; Rated Current: 20 A; Minimum Insulation Resistance: 10000 Mohm; Additional Features: C-TYPE CIRCUIT; Maximum Operating Temperature: 85 Cel; Capacitance: 1500 uF;
FEED THROUGH CAPACITOR; Rated Current: 20 A; JESD-609 Code: e4; Additional Features: C-TYPE CIRCUIT; No. of Functions: 1; Minimum Operating Temperature: -55 Cel;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Minimum Insulation Resistance: 10000 Mohm; No. of Terminals: 2; Maximum Operating Temperature: 85 Cel; Additional Features: C-TYPE CIRCUIT;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Tin (Sn); Mounting Type: PANEL MOUNT; Capacitance: 1500 uF; Rated Voltage: 500 V;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); Mounting Type: PANEL MOUNT; Rated Voltage: 500 V; Minimum Insulation Resistance: 10000 Mohm;
FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Functions: 1; Additional Features: C-TYPE CIRCUIT; Rated Voltage: 500 V; Minimum Insulation Resistance: 10000 Mohm;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Terminal Finish: Silver (Ag); JESD-609 Code: e4; Capacitance: 150 uF; Maximum Operating Temperature: 85 Cel;
FEED THROUGH CAPACITOR; Rated Current: 20 A; Manufacturer Series: 2499-003; No. of Functions: 1; Minimum Insulation Resistance: 10000 Mohm; Mounting Type: PANEL MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved