Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Additional Features: LOW PROFILE, SHIELDED; Total No. of Contacts: 8; Termination Contact Finish: GOLD (50) OVER NICKEL (100); Manufacturer Series: Z; Mounting Type: BOARD; CABLE; PANEL;
Median Price
$5.807
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$4.750
1k+ parts
$4.320
10k+ parts
$4.250
Verical
$5.189
PEI Genesis
Chip1Stop
$5.930
$5.350
Vyrian
$5.790
Digiode
IBS Electronics
$6.662
$6.059
$5.961
Rapid Electronics
Extreme Components
Nova Conductors
Bristol Electronics
Semicontronic
$4.330
$4.222
$4.200
Netroflash
Assy Fe
Corphita
Perfect Parts
Telecom & Datacom Connectors RJ45-8Z3 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Corcom
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
Shell Material:
Termination Type:
Total No. of Contacts:
RJ45-8Z3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Corcom has developed in excess of 820 homes over several residential projects. We have managed in excess of €1billion of assets, delivering approximately €680 million in added value. Every one of our 54 planning applications has been granted approval. We believe in a collaborative and positive approach to projects with all stakeholders which has resulted in outstanding results for our shareholders. Our vision is to maintain our solid relationships with existing partners and to develop new ones with those whose values and ambitions are aligned with ours.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
DS18B20Z+
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
67329-8000
Molex
Molex 67329-8000 USB connector has 0.276" body length, 0.57" width, and 0.539" depth. With 1A signal current rating, it's ideal for telecom/datacom applications. Features include tin contact finish, glass-filled polyamide insulator, and solder termination for durability.
RJE73-188-00210
Amphenol
Amphenol RJE73-188-00210 is a telecom & datacom connector with 8 contacts, 0.635" x 0.443" x 0.594" dimensions, and POLYETHYLENE insulator. It features split board lock mounting, staggered PCB contact pattern, and solder termination. Ideal for telecom applications requiring right angle mounting on boards with 1.78mm row spacing.
1-1734035-2
TE Connectivity
TE Connectivity 1-1734035-2 USB Connector features Glass Filled Polyamide9T insulator, Nickel finish, and 0.8mm terminal pitch. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and rated current of 1A.
1-1705951-1
TE Connectivity 1-1705951-1 is a Telecom & Datacom Connector with 0.598" body length, 0.453" width, and Tin (Sn) termination finish. It has an insulation resistance of 500M ohm and operates b/w -40 to 105°C. Ideal for telecom applications requiring a durable male connector with right-angle mounting option.
10103594-0001LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10103594-0001LF USB connector features a body length of 0.317", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom applications, this right-angle receptacle with gold over nickel termination is durable for up to 10,000 cycles.
6339191-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Polarization Key: POLARIZED HOUSING; Contact Style: TELCOM, MODULAR;
3021005-03
Qualtek Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
FCN-365P008-AU
Fujitsu
FCN-365P008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -55°C to 85°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
1304
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO; Insulator Material: ACRYLONITRILE BUTADIENE STYRENE;
57-30500
Cinch Connectivity Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; DIN Conformance: NO;
2301996-6
TE Connectivity's 2301996-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
RJHSE-538A
Amphenol RJHSE-538A is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and PHOSPHOR BRONZE contact material. It has a 0.65" x 0.53" x 0.62" body size, operates b/w -55°C to 85°C, and features SOLDER termination. Ideal for board and panel mounting in commercial applications.
5552740-1
TE Connectivity's 5552740-1 is a Telecom & Datacom Connector with 24 contacts, 0.085" mating pitch, and 105°C max operating temp. Ideal for board mounting applications in telecom and datacom systems due to its female contact gender, right angle receptacle body style, and solder termination type.
10168-6000EC
3m Electronic Products Division
10168-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features GOLD OVER NICKEL Termination Contact Finish and GLASS FILLED POLYESTER Insulator Material.
292304-2
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
5788336-1
TE Connectivity USB Connector 5788336-1 with 0.474" body length, 0.451" width, and 0.615" depth. Insulation resistance of 1000000000 ohm, operating temperature range from -55 to 85 °C. Ideal for telecom/datacom applications with solderable retention clips for board mounting.
RJHSE-3081
RJHSE-3081 by Amphenol is a Telecom & Datacom Connector with POLYETHYLENE insulator. Featuring 8 contacts, it has a 94V-0 UL Flammability Code and FEMALE contact gender. Ideal for BOARD mounting, this TELECOM AND DATACOM CONNECTOR is commonly used in applications requiring STRAIGHT mounting style and TELCOM, MODULAR contact style.
UC-31PFFH-QF7001
USB CONNECTOR;
0473460001
Molex 0473460001 is a USB connector with 5 contacts, POLYETHYLENE insulator, and FEMALE contact gender. Ideal for telecom/datacom applications, it features SURFACE MOUNT termination on BOARD mounting in a RIGHT ANGLE style.
651005136421
Wuerth Elektronik & Kg
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJ45-8N4-S
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Total No. of Contacts: 8; Mounting Type: BOARD;
RJ45-8N-B
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Termination Type: SOLDER; Body Width: .485 inch;
RJ45-8Z4
Corcom
TELECOM AND DATACOM CONNECTOR; Total No. of Contacts: 8; Shell Material: PHOSPHOR BRONZE; JESD-609 Code: e4; Termination Contact Finish: GOLD (50) OVER NICKEL (100); Additional Features: LOW PROFILE, SHIELDED;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
RJ45-8Z3
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: .74 inch; Reference Standard: CSA, UL;
RJ45-8Z
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: GOLD (50) OVER NICKEL (100); Termination Type: SOLDER; Manufacturer Series: Z; Shell Material: PHOSPHOR BRONZE; Total No. of Contacts: 8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved