Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: END CAP; Reference Standard: CE;
Median Price
$31.106
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
RS Americas
1+ parts
$26.830
100+ parts
$21.460
1k+ parts
$20.120
10k+ parts
-
Heilind Electronics
Interstate Connecting
Mouser Electronics
$32.100
$21.170
$20.620
DigiKey
$18.753
$18.035
RS (Exports)
$32.870
$28.430
Newark
$33.720
$26.980
$25.300
Element14
$38.000
$26.910
$26.700
IEC Supply
$298.900
Master Electronics
$20.070
$19.630
Verical
$23.206
TTI
$15.000
$13.130
Farnell
$21.060
$19.750
Freelance Electronics
$6.307
Galco
$8.190
TEDSS.com
$10.000
Carlton-Bates
$12.820
Kempston Controls
$13.680
Nova Conductors
$15.802
Component Electronics Inc.
$19.230
$14.420
$12.500
Hutch & Son
$20.730
Electro Sonic
$28.240
$18.730
Quotebeam
$30.810
Electronic Supply
IBS Electronics
$26.595
$25.315
M&R Communications
Vyrian
Electronics Depot
Resion
Q Components
MISTER SPROCKETS
Masline Electronics Inc.
Electronic Expediters
Bristol Electronics
AZTECH Wire
$9.297
Aztec Data Supply Inc.
$15.216
Netroflash
$15.486
Corohmni
$18.042
Continental Prestige Electronics
$20.050
Component Stockers USA
$25.040
$17.420
Allen Electronics Distributors
$26.050
$20.840
Neutron USA
$74.990
Argo Parts USA
Perfect Parts
Authorized Procurement Solutions
Fuses FNM-20 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
FNM-20 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Won-top Electronics
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Tak Cheong Electronics Holdings
Itt Semiconductor
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
325.300
Littelfuse
The Littelfuse 325.300 fuse is rated at 250V AC with a slow blow characteristic and 0.3A current. Its dimensions are 6.99mm x 32.39mm, suitable for electric circuit protection in various applications like industrial machinery and electronic equipment. Compliant with CSA and UL standards, it features pin wire terminals with tin/lead finish for through-hole mounting.
TCF60
Eaton Corporation
Eaton Corporation's TCF60 fuse is a 60A electric fuse with time delay blow characteristic. It has a rated AC voltage of 600V and rated DC voltage of 300V, suitable for inline mounting applications. With dimensions of 54.1mm x 25.4mm x 28.58mm, it offers circuit protection with a high breaking capacity of 300000A, meeting CSA and UL standards.
AJT125/400
Mersen S A
Mersen S A's AJT125/400 fuse, rated 125A and 600V, features time lag blow characteristic. With dimensions of 54mm x 181mm, it is a J-class fuse with 200kA breaking capacity. Ideal for electric circuit protection in applications requiring inline mounting and compliance with IEC and UL standards.
0452002.MRL
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
0678L9250-02
Bel Fuse
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
KTK-15
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP;
A214107
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 250 V; Rated Current: 32 A; Terminal Shape: END CAP;
C1Q3
Bel Fuse C1Q3 is a 1206-sized fuse with rated voltage of 125V and current of 3A. It has a very fast blow characteristic, suitable for circuit protection in applications requiring surface mount fuses. The fuse has a rated breaking capacity of 100A and operates b/w -55°C to 125°C temperatures.
0287010.PXCN
Littelfuse 0287010.PXCN fuse has a rated current of 10A, trip time of 0.08s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and rated DC voltage of 32V.
0297015.H
Littelfuse 0297015.H is a MINI fuse with 15A rated current, 32V DC voltage, and 308J nominal joule integral. It has a trip time of 0.03s and is ideal for circuit protection in automotive applications due to its compact size and high breaking capacity.
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
KLDR01.5TXP
KLDR01.5TXP by Littelfuse is a 1.5A CC fuse with 600V AC/300V DC ratings, 0.9302J joule integral, and 12s trip time. Ideal for electric circuit protection in various applications due to its CE/CSA/UL certifications and time-delay blow characteristic. Measures 10.3mm x 38.1mm with nickel terminal finish for inline mounting in bulk packaging.
KTK-10
Cooper Electronic Technologies
KTK-10 fuse by Cooper Electronic Technologies is a 10 A, 600 V fast-blow electric fuse with a rated breaking capacity of 100000 A. It has a body length/diameter of 10.3 mm and terminal shape of end cap. This fuse is commonly used for circuit protection in inline/holder mounting applications.
SP/LPJ-125SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
KTK-12
The Eaton Corporation's KTK-12 fuse has a rated voltage of 600V and a rated current of 12A, with fast blow characteristic. It is an electric fuse with dimensions of 10.3mm x 38.1mm, suitable for circuit protection in various applications meeting CSA and UL standards.
FNQ-R-3/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATDR3-2/10
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
FNQ-R-2-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
021806.3MXP
Littelfuse 021806.3MXP fuse, rated at 6.3A and 250V, features a time lag blow characteristic with trip time of 0.02s. With dimensions of 5x20mm, it is used for electric circuit protection in various applications due to its high pre arcing rating of 198.5 A2/s.
LPJ-175SPI
Eaton Corporation LPJ-175SPI fuse, rated 175A and 600V, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm, it is suitable for circuit protection in applications requiring a rated breaking capacity of 300kA. This J-class fuse with TAB/BLADE terminals is ideal for inline mounting in electrical systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNM-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
FNM-2-8/10
FNM-2-8/10 by Eaton Corporation is a 2.8A time delay electric fuse with a rated AC voltage of 250V. It has a midget size and is suitable for inline/holder mounting. This fuse, measuring 10.3mm x 38.1mm, is commonly used in circuit protection applications.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Manufacturer Series: FNM;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNM-2
The Eaton Corporation FNM-2 fuse, rated at 2A and 250V, features a midget size with time delay blow characteristic. It is designed for electric circuit protection in applications requiring a rated breaking capacity of 100A. The fuse has end cap terminals and conforms to CE, CSA, and UL standards for inline mounting in holders.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A;
FNM-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 20 A; Terminal Shape: END CAP; Rated Breaking Capacity: 10000 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: END CAP; Manufacturer Series: FNM;
FNM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 25 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNM-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNM-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .2 A; Terminal Shape: END CAP; Fuse Size: MIDGET;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved