Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
Median Price
$78.489
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Relay Specialties
1+ parts
$31.290
100+ parts
$21.540
1k+ parts
$19.390
10k+ parts
-
Standard Electric Supply Co.
$48.600
Master Electronics
$62.820
$49.220
$48.860
RS Americas
$71.490
$57.190
$53.620
Element14
$75.382
$57.310
$50.495
Interstate Connecting
$77.157
$59.621
$57.029
Farnell
$78.157
$62.515
Verical
$78.821
Heilind Electronics
$83.724
$64.508
$63.468
Mouser Electronics
$89.780
$67.520
RS (Exports)
$96.580
$77.260
DigiKey
$56.268
Newark
$102.120
$81.700
$76.590
IEC Supply
$714.400
PEI Genesis
TTI
Forefront Electronics and Design
$9.800
TEDSS.com
$13.290
Galco
$28.170
Carlton-Bates
$30.190
Nova Conductors
$38.454
Hutch & Son
$49.570
Component Electronics Inc.
$65.380
$49.040
$42.500
Electro Sonic
$69.100
$49.430
$48.080
IBS Electronics
$88.629
$74.996
$74.618
TME
$99.410
Electronic Supply
Q Components
Diverse Electronics
Vyrian
Masline Electronics Inc.
Quotebeam
Sunrise Surplus Inc.
Electronic Expediters
Bisco
Aztec Data Supply Inc.
$3.836
Corohmni
$18.079
Semicontronic
$26.600
$25.935
$25.802
Bastille Electronics
$38.450
$36.528
$34.220
Continental Prestige Electronics
$55.190
Component Stockers USA
$66.200
$49.060
Allen Electronics Distributors
$68.370
$54.700
Neutron USA
$189.990
Argo Parts USA
Glotronic Ltd.
Resion (Excess)
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Fuses FNQ-R-3 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Class:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FNQ-R-3 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LP-CC-3-2/10
Eaton Corporation
Eaton Corporation LP-CC-3-2/10 fuse, rated 3.2A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10x38.1mm with end cap terminals, it meets CE, CSA, and UL standards for reliable performance.
J-41
Fuses;
BK/ATC-20
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE;
0451001.MRL
Littelfuse
Littelfuse 0451001.MRL Nano fuse with 1A current rating, 125V AC/DC voltage, and 0.6029J joule integral. Ideal for circuit protection in electronics, featuring very fast blow characteristic and surface mounting feature. Dimensions of 6.1mm x 2.69mm x 2.69mm make it suitable for compact applications.
0452001.MRL
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
7012540.5
Siba
Siba 7012540.5 is a 5A electric fuse with a rated AC voltage of 600V and a blow characteristic of VERY FAST. It has dimensions of 6.35mm x 31.8mm and is commonly used for circuit protection in inline/holder mounting applications.
FWS-10A20F
Eaton Corporation's FWS-10A20F fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A breaking capacity. Ideal for circuit protection in applications requiring a 10A rated current, such as inline or holder mounting setups. Compliant with CE and IEC standards for reliable performance.
ANN-500
Eaton Corporation's ANN-500 fuse is a 500A electric fuse with very fast blow characteristic. It has a rated AC voltage of 125V and rated breaking capacity of 2500A. Ideal for surface mount applications, it features built-in indicator and meets CSA and UL standards.
0ATO010.V
0ATO010.V fuse by Littelfuse offers a rated current of 10A and trip time of 0.1s, suitable for electric circuit protection with a rated breaking capacity of 1000A. With a compact body size of 19.1mm x 12.3mm x 5.1", it is ideal for inline mounting applications in various electronic devices.
FNQ-R-3/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0313.600MXP
0313.600MXP by Littelfuse is a 3AG fuse with 0.6A rated current and 250V rated voltage, featuring a time lag blow characteristic. With a trip time of 5s and nominal joule integral of 4J, it provides supplemental circuit protection in applications requiring an electric fuse with CE, CSA, and UL reference standards compliance.
SR-5-100MA-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .1 A; Terminal Shape: PIN WIRE; Minimum Operating Temperature: -40 Cel;
FRN-R-35
Eaton Corporation's FRN-R-35 fuse, with 250V AC/125V DC voltage rating and 35A current, features RK5 class and time delay blow characteristic. Ideal for circuit protection in various applications, it comes in a compact size of 20.6mm x 76.2mm with end cap terminal shape for easy mounting in an inline/holder configuration.
0452002.MRL
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
DMM-B-44/100
The Eaton Corporation DMM-B-44/100 fuse is a 0.44A fast blow electric fuse with a rated voltage of 1000V AC/DC and breaking capacity of 10kA. It features nickel terminal finish, UL standard compliance, and is suitable for inline mounting applications in circuit protection systems.
0297005WXNV
Littelfuse 0297005WXNV fuse with 5A rated current, 25J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring inline mounting, such as automotive electronics and industrial equipment. Operating temperature range from -40°C to 125°C ensures reliable performance in various environments.
0AKRBK400-BB
Bel Fuse
Bel Fuse 0AKRBK400-BB is a 400A electric fuse with 500V DC voltage rating. It has a compact body of 49x37x24 mm and can withstand temperatures from -40 to 105°C. Ideal for circuit protection in various applications due to its high breaking capacity and tab/blade terminals.
FNQ-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0287015.PXCN
0287015.PXCN fuse by Littelfuse has a rated current of 15A and trip time of 0.08s, making it ideal for circuit protection in various applications. With a nominal joule integral of 340J and rated breaking capacity of 1000A, this fuse offers reliable performance. Its compact dimensions (19.1mm x 5.1mm x 12.3mm) and temperature range (-40°C to 125°C) further enhance its versatility in electronic systems.
0453001.MR
Littelfuse 0453001.MR NANO fuse, rated 1A at 125V AC/DC, with 0.6029J joule integral and 5s trip time. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm. Compliant with CE, CSA, CUL, PSE, TUV, UL standards for various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNQ-R-1-1/4
Eaton Corporation's FNQ-R-1-1/4 fuse, rated at 1.25A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-R-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
FNQ-R-1/2
Eaton Corporation's FNQ-R-1/2 fuse, rated at 600V and 0.5A, features time delay blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, it has nickel terminal finish and can be mounted inline or in a holder.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
FNQ-R-1/4
Eaton Corporation's FNQ-R-1/4 fuse, rated at 0.25A and 600V AC, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring a high breaking capacity of 200kA. The fuse is designed with an end cap terminal shape and nickel finish for use in inline or holder mounting configurations per CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved