Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
Median Price
$1.950
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$1.235
100+ parts
-
1k+ parts
$0.984
10k+ parts
$0.955
Heilind Electronics
$1.341
$1.050
$1.033
Farnell
$1.560
RS Americas
$2.090
$1.670
DigiKey
$2.620
$1.532
$1.169
$0.965
RS (Exports)
$2.700
$2.160
Element14
Newark
Mouser Electronics
$2.950
$1.730
$1.310
$1.110
TTI
$0.660
$0.645
$0.638
Master Electronics
$1.220
$1.180
Verical
$2.043
$1.478
$1.442
Waytek Inc.
$0.229
$0.160
$0.152
Chip1Stop
$1.060
Arrow
$1.154
$1.105
$1.089
Nova Conductors
$0.876
Component Electronics Inc.
$3.850
$2.880
$2.500
Electro Sonic
$1.101
$0.821
IBS Electronics
$2.287
$1.773
$1.716
Vyrian
TME
$1.680
$1.420
$1.370
Goldney Electronics S.L.
VNN
Sea View Technologies
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Sensible Micro Corp
Bristol Electronics
Prism Electronics
Semicontronic
$0.172
$0.168
$0.167
Aranea Global
$0.858
$0.824
Argo Parts USA
Advanced Electronics
$0.986
$0.907
$0.850
Continental Prestige Electronics
$1.710
$1.100
Component Stockers USA
$1.900
$0.900
Allen Electronics Distributors
$2.070
$1.660
Aztec Data Supply Inc.
$4.993
Perfect Parts
Authorized Procurement Solutions
Corohmni
Cyclops Electronics Ltd (Excess)
Fuses BK/ATM-10 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
BK/ATM-10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Zowie Technology
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Sensitron Semiconductor
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Leshan Radio
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BK/ATC-30
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Body Width: 5.25 inch;
ATM-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1000 A;
FRN-R-8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 8 A; Terminal Shape: END CAP;
ATDR3-2/10
Mersen S A
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
JTD1.25ID
Littelfuse
Littelfuse JTD1.25ID fuse, rated 1.25A with time delay blow characteristic, suitable for electric circuit protection at 600V AC and 300V DC. Features indicator and high breaking capacity of 200kA. Commonly used in inline/holder mounting applications.
LP-CC-3
Eaton Corporation
The Eaton LP-CC-3 fuse, with 3A rated current and 600V AC voltage, features time delay blow characteristic. Measuring 10.3mm x 38.1mm, it is ideal for electric circuit protection in various applications. With a rated breaking capacity of 200kA and CE/CSA/UL certifications, it is commonly used in inline or holder mounting setups.
39211000000
The Littelfuse 39211000000 fuse has a rated current of 1A and nominal joule integral of 8J, with a trip time of 0.02s. It is used for circuit protection in applications requiring a rated AC voltage of 250V, featuring a time lag blow characteristic and max operating temperature of 125°C.
0216001MXP
0216001MXP by Littelfuse is a 5x20mm fuse with a rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.18J, rated AC voltage of 250V, and trip time of 0.01s. Ideal for circuit protection in applications requiring electric fuses with a max operating temperature of 125°C and reference standards including CCC, CE, CSA, PSE, UL, VDE.
LP-CC-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
3403.0169.24
Schurter Ag
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
ANN-80
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
0216002.MXP
Littelfuse 0216002.MXP fuse, rated at 2A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
KTK-R-1
KTK-R-1 fuse by Eaton Corporation is a 1A, 600V fast blow electric fuse with a rated breaking capacity of 200kA. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in inline or holder mounting applications.
BD40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 550 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
0437.250WR
Littelfuse 0437.250WR is a fast-acting electric fuse with 0.25A rated current and 125V rated voltage. It has a trip time of 5 seconds, making it suitable for circuit protection in applications requiring quick response to overcurrent conditions. With dimensions of 3.2mm x 1.63mm x 0.82mm, this surface mount fuse is ideal for use in electronic devices where space is limited.
3413.0328.22
The Schurter Ag 3413.0328.22 fuse is a time lag electric fuse with a rated current of 10A and a max operating temperature of 90°C. It has dimensions of 3.2mm x 1.6mm x 0.6mm and is suitable for surface mount applications in circuit protection systems.
025101.5MXL
Littelfuse 025101.5MXL is a PICO fuse with 1.5A rated current and 125V DC/AC voltage, offering very fast blow characteristic in electric circuit protection applications. With dimensions of 2.8mm x 7.11mm, it has a trip time of 1s and nominal joule integral of 0.587J for supplemental use at temperatures ranging from -55°C to 125°C.
LP-CC-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
GMA-1-R
GMA-1-R fuse by Eaton Corporation is a 5x20mm fast blow electric fuse with a rated current of 1A and voltage of 250V. With a nominal joule integral of 0.48J, it offers circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA, PSE, and UL standards, it ensures reliable performance in various electrical systems.
FNQ-R-1-1/4
Eaton Corporation's FNQ-R-1-1/4 fuse, rated at 1.25A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK/ATC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATC;
BK/ATC-10 by Eaton Corp is a 10A fast blow electric fuse with 32V AC/DC rating. Measuring 19.3mm x 5.25mm x 12.5mm, it has a trip time of 0.1s and operates b/w -40°C to 100°C. Ideal for circuit protection in UL standard applications with a rated breaking capacity of 1000A.
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE;
BK/ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
Eaton Corporation's BK/ATM-15 fuse, with 15A rated current and 32V rated voltage, features fast blow characteristic and 1000A breaking capacity. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in applications requiring a temperature range of -40°C to 100°C and UL standard compliance.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
BK/ATC-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
BK/ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
The Eaton Corporation BK/ATM-30 fuse is a 30A electric fuse with fast blow characteristic, rated for 32V DC voltage. With dimensions of 10.92mm x 3.81mm x 8.81mm, it has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for inline mounting in circuit protection applications, meeting UL standards.
BK/ATM-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATM;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Body Width: 3.81 inch;
BK/ATM-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
The Eaton Corporation BK/ATM-5 fuse is a 5A electric fuse with fast blow characteristic. It has dimensions of 10.92mm x 3.81mm x 8.81mm and rated voltage of 32V, suitable for inline mounting applications. With UL reference standard, it offers circuit protection with a rated breaking capacity of 1000A at temperatures ranging from -40°C to 100°C.
BK/ATC-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
BK/ATC-5 by Eaton Corp is a 32V, 5A fast blow electric fuse with 1000A breaking capacity. Measuring 19.3mm x 5.25mm x 12.5mm, it has tab/blade terminals and UL certification. Ideal for inline mounting in circuits requiring quick 0.1s trip time at -40 to 100°C temperatures.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved