Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BK/AGC-5-R by Cooper Industries is a 5A fast blow electric fuse with a rated voltage of 250V. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse, with a pre arcing rating of 0.04 A2/s, is commonly used in circuit protection applications.
Median Price
$0.820
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Farnell
1+ parts
$0.571
100+ parts
$0.369
1k+ parts
$0.356
10k+ parts
-
Mouser Electronics
$0.740
$0.519
$0.397
$0.394
RS Americas
$0.650
Newark
$0.827
$0.677
Arrow
$0.878
$0.472
$0.106
$0.105
DigiKey
$0.890
$0.518
$0.396
$0.328
RS (Exports)
$0.710
Element14
$1.040
$0.685
$0.623
Peerless Electronics
$1.500
TTI
$1.390
$1.320
$1.250
Master Electronics
$0.584
$0.512
$0.441
Verical
$0.795
$0.660
$0.612
PEI Genesis
Avnet
$0.447
$0.119
$0.116
Heilind Electronics
$0.474
$0.395
Interstate Connecting
$0.678
$0.586
Nova Conductors
TME
$0.572
Electro Sonic
$0.127
$0.108
IBS Electronics
$1.978
$1.934
$0.163
NAC Semi
$0.230
Vyrian
VNN
Powertech Controls
Bristol Electronics
EMSNET
Semi Source
Ampacity Inc.
Netroflash
$0.376
$0.368
Continental Prestige Electronics
$0.591
$0.462
$0.415
Allen Electronics Distributors
$0.620
Perfect Parts
Glotronic Ltd.
This fuse has a low joule integral of 0.045 J, which allows for efficient energy absorption and protection of electrical circuits.
With a high rated AC voltage of 250 V, this fuse can handle a wide range of electrical applications and provide reliable protection against voltage spikes.
The fuse is conveniently packed in a box, ensuring easy storage and organization during installation or replacement.
The compact body size of 6.35 mm in length/diameter allows for space-saving installation in various electrical systems.
With a rated voltage of 250 V, this fuse is compatible with standard voltage levels, making it suitable for a wide range of applications.
The end cap terminal shape provides secure and reliable electrical connections, ensuring efficient operation and protection against circuit faults.
The dimensions of 6.35mm x 31.75mm offer a compact and standardized form factor for easy integration into electrical panels or equipment.
The 31.75 mm body height allows for sufficient internal clearance while ensuring compatibility with the standardized fuse holders or inline mounting features.
This fuse has a high rated current of 5 A, enabling it to handle moderate to high electrical loads safely and effectively.
With a fast blow characteristic, this fuse responds quickly to power surges or short circuits, minimizing the risk of damage to equipment and ensuring prompt circuit protection.
This electric fuse provides reliable circuit protection against overcurrent, short-circuit, and other electrical faults, safeguarding valuable equipment and preventing potential hazards.
The use of nickel (Ni) terminal finish ensures excellent conductivity, corrosion resistance, and longevity, resulting in reliable electrical connections and extended fuse lifespan.
With a high rated breaking capacity of 200 A, this fuse can safely interrupt fault currents up to 200 A, protecting electrical systems from extreme overloads or short circuits.
The pre-arching rating of 0.04 A2/s indicates the ability of this fuse to suppress arc formation during circuit interruption, enhancing safety and minimizing potential hazards.
This fuse offers versatile mounting options, allowing for easy installation either in an inline configuration or a compatible fuse holder, providing flexibility and convenience.
This fuse complies with recognized industry standards, including CSA and UL, ensuring its quality, performance, and adherence to safety regulations for reliable circuit protection.
Fuses BK/AGC-5-R attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
BK/AGC-5-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.20
SB
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
MBRS130LT3G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TCF70
Cooper Industries
The TCF70 by Cooper Industries is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and a minimum operating temperature of -10°C. The fuse has a body length/diameter of 76.45mm, a body width of 25.4 inch, and a body height of 32mm. It has a tin terminal finish and a rated breaking capacity of 300000A. The TCF70 is suitable for applications that require circuit protection in systems with a maximum operating temperature of 65°C and a rated DC voltage of 300V.
0452005MRL
Littelfuse
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
0453005.MR
Littelfuse 0453005.MR fuse, rated at 5A and 125V, offers very fast blow characteristic with a trip time of 5s. Ideal for circuit protection in applications requiring a nano-sized fuse with surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, and UL standards.
AJT60
Mersen S A
AJT60 fuse by Mersen S A is a 60A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. It features a body size of 27mm x 60mm, end cap terminal shape, and inline/holder mounting feature. Ideal for circuit protection in applications requiring high breaking capacity up to 200kA.
LP-CC-2-8/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.8 A; Terminal Shape: END CAP;
0466002.NR
Littelfuse 0466002.NR fuse, rated at 2A and 63V, offers very fast blow characteristic with 0.2326J nominal joule integral. Ideal for circuit protection in electronics, it has a compact size of 1206 (3.18mm x 1.52mm x 0.58mm) and matte tin over nickel terminal finish for surface mount applications.
AGC-2-R
Eaton Corporation
AGC-2-R by Eaton Corp is a 2A electric fuse with 250V AC voltage rating and 17.52J nominal joule integral. It has a fast blow characteristic, rated breaking capacity of 100A, and operates b/w -55°C to 125°C. Commonly used for circuit protection in inline/holder mounting applications.
ATM-5
Eaton Corporation's ATM-5 fuse, with 5A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like inline or holder mounting due to its UL reference standard compliance.
0313.600HXP
The Littelfuse 0313.600HXP is a 3AG fuse with a rated current of 0.6 A and a max operating temperature of 125°C. It has a time lag blow characteristic and is commonly used for circuit protection in applications such as inline holders.
SP/LPJ-200SP
Eaton Corporation's SP/LPJ-200SP fuse, rated 200A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm and silver terminal finish, it is ideal for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this fuse offers a high breaking capacity of 300kA.
LP-CC-2-1/2
Eaton Corporation LP-CC-2-1/2 fuse, rated 2.5A and 600V AC, with time delay blow characteristic. Suitable for electric circuit protection in various applications due to its 200kA breaking capacity and compact dimensions of 10x38.1mm. Compliant with CE, CSA, UL standards for reliable performance.
LP-CC-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
LP-CC-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
KTK-10
KTK-10 fuse by Cooper Electronic Technologies is a 10 A, 600 V fast-blow electric fuse with a rated breaking capacity of 100000 A. It has a body length/diameter of 10.3 mm and terminal shape of end cap. This fuse is commonly used for circuit protection in inline/holder mounting applications.
LP-CC-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
LKN-100
ELECTRIC FUSE;
LP-CC-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.1 A; Terminal Shape: END CAP;
LP-CC-6
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6 A; Terminal Shape: END CAP;
PTS120660V010
Eaton Corporation's PTS120660V010 is a 1206-sized electric fuse with a rated voltage of 60V and a rated current of 0.1A. It has a fast blow characteristic and is suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK-AGC-2-R
The Eaton Corporation BK-AGC-2-R fuse is rated at 2A and 250V, with a fast blow characteristic. It has a nominal joule integral of 17.52J and dimensions of 6.3x32mm, suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 100A.
BK/AGC-2-R
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
BK/AGC-1-R
BK/AGC-1-R fuse by Cooper Industries is a 1A, 250V electric fuse with a blow characteristic of fast. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse is commonly used for circuit protection in various applications.
BK-AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
BK/AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
BK-AGC-1-1-2-R
BK-AGC-1-1-2-R by Eaton Corp is a 6.3x32mm fuse with 250V AC voltage rating, 9.023J joule integral, and 1.5A rated current. It has fast blow characteristic, nickel terminal finish, and CSA/UL reference standards for electric circuit protection applications in inline/holder mounting setups at temperatures ranging from -55 to 125°C.
BK/AGC-1-1/2-R
Cooper Industries' BK/AGC-1-1/2-R fuse, rated at 1.5A and 250V, features fast blow characteristic with a pre-arcing rating of 0.015 A2/s. It is an electric fuse with nickel terminal finish, inline mounting suitable for circuit protection in various applications meeting CSA and UL standards.
BK-AGC-15-R
The Eaton Corporation BK-AGC-15-R fuse, rated at 15A and 32V, features a fast blow characteristic with a pre-arcing rating of 0.566 A2/s. With dimensions of 6.3x32mm and terminal shape end cap, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Reference standards include CSA and UL for quality assurance.
BK/AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK/AGC-12-R
The Eaton Corporation BK/AGC-12-R fuse, rated at 32V and 12A with a blow characteristic of FAST, is ideal for electric circuit protection. Measuring 6.3x32mm with nickel terminal finish, it has a rated breaking capacity of 1000A. This fuse, compliant with CSA and UL standards, is commonly used in inline/holder mounting applications.
BK/AGC-1/2-R
The Eaton BK/AGC-1/2-R fuse, rated at 0.5A and 32V, features a fast blow characteristic with a nominal joule integral of 0.269J. With dimensions of 6.35x31.75mm, it is used for electric circuit protection in applications requiring a rated AC voltage of 250V and a breaking capacity of 35A.
BK/AGX-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/AGX-3/16
The Eaton BK/AGX-3/16 fuse is a 6.3x25.4mm fast blow electric fuse with 0.1875A rated current and 250V AC voltage, suitable for inline mounting applications. It features nickel terminal finish, 35A breaking capacity, and CUL standard compliance, making it ideal for circuit protection in various electronic devices.
BK/AGX-3/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
BK-AGC-20-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: END CAP; Fuse Size: 6.3x32mm;
BK-AGC-5-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
BK/AGC-20-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Height: 31.75 mm;
BK/AGX-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: END CAP; Fuse Size: 6.3X25.4mm;
BK/AGC-15B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Rated Breaking Capacity: 1000 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved