Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
Median Price
$3.040
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.550
100+ parts
$1.080
1k+ parts
$0.831
10k+ parts
$0.785
RS Americas
$1.650
$1.320
-
DigiKey
$1.860
$1.089
$0.686
RS (Exports)
$6.920
$6.300
Master Electronics
$4.220
$3.880
Verical
$4.278
$1.079
Nova Conductors
$0.880
VNN
IBS Electronics
$6.340
$4.711
Electro Sonic
$2.997
$0.845
Vyrian
Continental Prestige Electronics
$0.862
Argo Parts USA
Netroflash
Semicontronic
$0.920
$0.897
$0.892
Allen Electronics Distributors
Glotronic Ltd.
Fuses BK/S501-3.15-R attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
BK/S501-3.15-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Diodes Incorporated
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Renesas Electronics
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
032601.5MXP
Littelfuse
Littelfuse 032601.5MXP fuse, rated 1.5A at 250V, offers time delay blow characteristic with trip time of 5s. Ideal for circuit protection in applications requiring a nominal joule integral of 59.7J and rated breaking capacity of 100A.
17.5TDLSJ16
Eaton Corporation
The Eaton Corporation 17.5TDLSJ16 fuse is a 16A electric fuse with a rated AC/DC voltage of 17500V, offering a high breaking capacity of 50000A. With dimensions of 51mm x 292mm and built-in indicator features, it is commonly used for circuit protection in various applications requiring reliable overcurrent protection.
FWP-50A22F
FWP-50A22F by Eaton Corporation is a 50 A electric fuse with a rated breaking capacity of 200000 A. It has a nominal joule integral of 155 J and can handle AC voltages up to 700 V. This fuse, measuring 22.2mm x 58mm, is commonly used for circuit protection in various applications.
BK/ATM-15
Eaton Corporation's BK/ATM-15 fuse, with 15A rated current and 32V rated voltage, features fast blow characteristic and 1000A breaking capacity. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in applications requiring a temperature range of -40°C to 100°C and UL standard compliance.
FNQ-R-1-4/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.4 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
FWP-32A22F
Eaton Corporation's FWP-32A22F fuse offers 32A rated current and 200kA rated breaking capacity. With a 55J nominal joule integral, it provides circuit protection for applications requiring up to 700V AC and 500V DC. This electric fuse, compliant with IEC and UL standards, is designed for inline/holder mounting in various industrial settings.
LP-CC-2-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
SPFJ160.XXL
SPFJ160.XXL by Littelfuse is a midget fuse with a rated current of 160 A and a rated breaking capacity of 20000 A. It is designed for circuit protection in applications requiring an electric fuse, such as inline or holder mounting in CE, IEC, and UL reference standard compliant systems.
BK-MDL-5-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Height: 31.75 mm;
0313025.MXP
Littelfuse 0313025.MXP fuse, rated at 25A and 250V, offers a time lag blow characteristic with a trip delay of 5s. With a nominal joule integral of 16500J, it is ideal for circuit protection in applications requiring supplemental fuses with a rated AC voltage of up to 32V.
FNQ-R-2
The Eaton Corporation FNQ-R-2 fuse is a 2A, 600V time delay CC class fuse with a rated breaking capacity of 200kA. It has nickel terminal finish and dimensions of 10.3mm x 38.1mm, suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, it comes in BOX packing method for easy installation.
BK/ATM-30
The Eaton Corporation BK/ATM-30 fuse is a 30A electric fuse with fast blow characteristic, rated for 32V DC voltage. With dimensions of 10.92mm x 3.81mm x 8.81mm, it has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for inline mounting in circuit protection applications, meeting UL standards.
0215.315MXP
0215.315MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.315A rated current and 250V rated voltage, suitable for circuit protection in various applications. It has a time lag blow characteristic, trip time of 0.005s, and nominal joule integral of 0.975J. Ideal for inline mounting, it meets CE, IEC, UL standards with nickel terminal finish.
JKS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 200 V; Rated Current: 40 A; Terminal Shape: END CAP;
SS-5-4A-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: PIN WIRE; Reference Standard: CSA; CQC; METI; SEMKO; UL; VDE;
0217.500MXP
0217.500MXP fuse by Littelfuse is a 0.5A, 250V rated electric fuse with very fast blow characteristic and 0.01s trip time. Measuring 5x20mm, it has a rated breaking capacity of 35A and is suitable for inline mounting applications in circuits requiring protection against overcurrent events.
FNQ-R-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
FWS-10A20F
Eaton Corporation's FWS-10A20F fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A breaking capacity. Ideal for circuit protection in applications requiring a 10A rated current, such as inline or holder mounting setups. Compliant with CE and IEC standards for reliable performance.
DMM-B-44/100
The Eaton Corporation DMM-B-44/100 fuse is a 0.44A fast blow electric fuse with a rated voltage of 1000V AC/DC and breaking capacity of 10kA. It features nickel terminal finish, UL standard compliance, and is suitable for inline mounting applications in circuit protection systems.
ATM-20
Eaton Corporation's ATM-20 fuse, with 20A rated current and 32V rated voltage, features fast blow characteristic and tin terminal finish. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications requiring a UL reference standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK/S500-5-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Nominal Joule Integral: 42 J;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 50 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK/S500-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Reference Standard: BSI; CCC; CSA; CUL; IMQ; SEMKO; UL; VDE;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/S504-2.5A
BK/S504-2.5A by Cooper Industries is a 2.5A time delay electric fuse with a rated AC voltage of 250V. It has a nominal joule integral of 36J and a rated breaking capacity of 35A. This fuse, with dimensions of 5.2mm x 10mm, is commonly used for circuit protection in various applications such as inline/holder mounting systems.
BK/S501-630-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Reference Standard: CSA; IEC; SEMKO; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Pre Arcing Rating (A2/s): 0.064;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Manufacturer Series: S501;
BK-S505-2-R
BK-S505-2-R by Eaton Corp is a 5x20mm electric fuse with 250V AC voltage rating, 2A current, and 9.6J nominal joule integral. Ideal for circuit protection in applications requiring time delay blow characteristic, it has nickel terminal finish and BSI, CCC, CSA certifications.
BK/S505-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Pre Arcing Rating (A2/s): 9.6;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Height: 20 mm;
BK-S505-3-15-R
The Eaton BK-S505-3-15-R fuse is a 5x20mm time delay electric fuse with a rated current of 3.15A and voltage of 250V, suitable for inline mounting applications. It has a nominal joule integral of 36.6J and a rated breaking capacity of 1500A, meeting standards like BSI, CCC, CSA, UL, and VDE for reliable circuit protection in various electronic devices.
BK/S500-630-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
BK/S501-3.15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
BK/S501-315-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: END CAP; Nominal Joule Integral: .01 J;
BK/S501-3.15AV
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: 8.1 J;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved