Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 35 A; Terminal Shape: TAB/BLADE;
Median Price
$176.730
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Wes Garde
1+ parts
$28.700
100+ parts
-
1k+ parts
10k+ parts
Waytek Inc.
$30.820
$23.110
$19.930
Master Electronics
$123.460
TTI
$177.610
$130.210
DigiKey
$189.340
$126.864
Airline Hydraulics
$203.940
Verical
$12.453
Kempston Controls
$20.310
Electro Enterprises
$44.941
$26.830
FDH Electronics
$147.436
$119.250
$108.120
IBS Electronics
$241.257
$160.310
VNN
Nova Conductors
Powertech Controls
Van Brakel Electronic
Pride Electronics
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Aranea Global
Perfect Parts
Fuses ANL-35 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Additional Features:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
ANL-35 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
American Power Devices
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Bourns
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
DS18B20Z+
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Digitron Semiconductors
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BK/ATC-10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATC;
0287002.PXCN
Littelfuse
Littelfuse 0287002.PXCN fuse has a Nominal Joule Integral of 1.4 J and Trip Time of 0.02s, with dimensions 19.1mm x 5.1mm x 12.3mm. Rated for 2A current, it's used in circuit protection applications with rated breaking capacity of 1000A at max operating temp of 125°C and min temp -40°C.
DMM-B-44/100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1000 V; Rated DC Voltage: 1000 V; Rated Current: .44 A; Terminal Shape: END CAP;
LPJ-50SP
Eaton Corporation
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
ATDR2-1/4
Mersen S A
ATDR2-1/4 by Mersen S A is a 2.25A time delay fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it offers a high breaking capacity of 200kA. Ideal for electric circuit protection in various applications like inline mounting or holders, meeting CSA and UL standards.
3413.0002.11
Schurter Ag
Schurter Ag's 3413.0002.11 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 10A, it operates b/w -55°C to 90°C temperatures efficiently, meeting CUL and UL standards for reliable performance.
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE;
39601600000
39601600000 fuse by Littelfuse is a TE5 size with rated voltage of 125V and current of 0.16A. It has a time lag blow characteristic, trip time of 60s, and nominal joule integral of 0.058J. Ideal for circuit protection in applications requiring a through hole mounting feature.
ATQR25
The Mersen S A ATQR25 fuse is a 25A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it features time delay blow characteristic and is suitable for inline/holder mounting applications in circuits requiring protection up to 300V DC at a max operating temperature of 80°C.
0034.6618
Schurter Ag 0034.6618 fuse has 34J nominal joule integral, rated AC voltage of 250V, and a max operating temperature of 125°C. It is used for circuit protection with a time lag blow characteristic in applications requiring a rated current of 2A and rated breaking capacity of 35A.
0501020.WR
0501020.WR by Littelfuse is a 1206 fuse with 20A rated current, 32V DC voltage, and fast blow characteristic. It has a trip time of 14400s and nominal joule integral of 54.76J. Ideal for circuit protection in electronics due to its small dimensions and high breaking capacity.
02183.15HXP
The Littelfuse 02183.15HXP fuse is a 3.15A, 250V time lag electric fuse with dimensions of 5x20mm. It has a rated breaking capacity of 35A and a nominal joule integral of 38.15J, making it suitable for circuit protection in various applications requiring supplemental fuses. This fuse meets standards such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, and VDE for reliable performance in inline/holder mounting configurations.
BK/ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
39501600000
39501600000 by Littelfuse is a TE5 fuse with 125V rated voltage, 0.16A current, and 0.0037J nominal joule integral. It is used for circuit protection in applications requiring fast blow characteristic, UL reference standard compliance, and 100A rated breaking capacity.
ATM-20LP
Eaton Corporation's ATM-20LP fuse is a 20A electric fuse with fast blow characteristic. It has dimensions of 10.9mm x 3.81mm x 8.73mm and rated voltage of 32V, suitable for inline mounting applications in circuits requiring protection up to 1000A breaking capacity at temperatures ranging from -40°C to 125°C.
0314002.MXP
0314002.MXP fuse by Littelfuse is a 3AB size with 2A current rating and fast blow characteristic. It has a rated AC voltage of 250V, nominal joule integral of 5.7J, and max operating temperature of 125°C. Ideal for circuit protection in applications requiring a compact fuse with high breaking capacity.
0466.125NRHF
Littelfuse 0466.125NRHF is a 1206 size fast-acting supplemental fuse with 0.125A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, pre-arcing rating of 0.0004 A2/s, and operates b/w -55°C to 90°C. Ideal for circuit protection in electronics, it meets CE, CSA, TUV, and UL standards for surface mount applications.
0297020WXNV
Littelfuse 0297020WXNV fuse with 20A rated current, 380J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring a compact design, featuring TAB/BLADE terminals and SILVER finish. Dimensions of 10.9mm x 3.8mm x 8.8mm make it suitable for inline mounting or holder use in environments ranging from -40°C to 125°C.
KTK-3
KTK-3 fuse by Eaton Corporation is a 600V fast blow electric fuse with a rated current of 3A. It has a compact body size of 10.3mm x 38.1mm and can handle high breaking capacity up to 100000A. This fuse is commonly used for circuit protection in various applications, such as inline or holder mounting in electrical systems.
FWP-10A14FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 10 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ANL-300
ANL-300 by Eaton Corp is a 300A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features END CAP terminals and an inline mounting feature. Ideal for circuit protection in applications requiring up to 80V DC voltage, compliant with CSA and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 300 A; Terminal Shape: TAB/BLADE;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 300 A; Terminal Shape: END CAP; Rated Breaking Capacity: 2700 A;
ANL-350
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 350 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 350 A; Terminal Shape: TAB/BLADE;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 350 A; Terminal Shape: END CAP; Dimensions: 81mm x 22.2mm;
ANL-35
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 35 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 35 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
ANL-325
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 325 A; Terminal Shape: TAB/BLADE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved