Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: WB; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Inductance (Primary): 25 uH; Maximum Cutoff Frequency: 500 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF Transformers WB4-1HLD attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
WB4-1HLD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
General Instrument
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Excel (Suzhou) Semiconductor
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Space Power Electronics
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SWB3010-SMLB
Coilcraft
Coilcraft's SWB3010-SMLB RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits for signal transformation and filtering.
BALF-SPI2-02D3
STMicroelectronics
STMicroelectronics' BALF-SPI2-02D3 RF Transformer has 3.6 dB Insertion Loss, operates b/w -40°C to 105°C, and features Tin/Silver/Copper terminal finish. Ideal for surface mount applications in various RF circuits due to its compact size of 1.6mm x 2.15mm x 0.68mm.
MABACT0059
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width: 2.79 mm; Maximum Cutoff Frequency: 3000 MHz; Height: 2.72 mm;
BALF-2690-02D3
BALF-2690-02D3 by STMicroelectronics is an RF transformer ideal for wireless applications. It features a low insertion loss of 1.2 dB, operates b/w 2400 MHz and 2500 MHz, and withstands temperatures from -40 °C to 85 °C. Its compact surface mount design ensures efficient integration in devices.
ADT4-1T+
Mini-circuits
The Mini-circuits ADT4-1T+ RF Transformer has a power rating of 1W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications with a min cutoff frequency of 9GHz and surface mounting feature.
ADT2-1T-1P
Mini-circuits' ADT2-1T-1P RF Transformer has a power rating of 1W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications, it operates b/w -40 to 85°C with cutoff frequencies ranging from 8KHz to 600MHz.
1812WBT-3LC
1812WBT-3LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 1.25 uH Inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 4 GHz, max cutoff frequency of 200 MHz, and surface mounting feature.
TC1-1-43A+
TC1-1-43A+ by Mini-circuits is a RF transformer with 2 dB insertion loss, operating from -40 to 85°C. It has dimensions of L3.81xB3.81xH4.06 mm and supports frequencies up to 4000 MHz. Ideal for surface mount applications in RF circuits requiring high-frequency transformation.
ETC1-1-13TR
ETC1-1-13TR by M/a-com Technology Solutions is a RF Transformer with 0.25W power rating, 3.5dB insertion loss, and 30mA max DC unbalance current. It is used for matching applications in RF circuits, with dimensions of L3.81xB2.79xH2.79mm and operating temperatures ranging from -55 to 85°C.
TC1-1TX+
Mini-circuits TC1-1TX+ RF Transformer has a power rating of 0.25W with 3dB insertion loss. Ideal for signal applications, it operates b/w -40 to 85°C, covering frequencies from 400KHz to 500MHz. Compact at L3.81xB3.81xH4.06mm, it's surface mountable for easy integration in various systems.
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
748412245
Wuerth Elektronik & Kg
Wurth Elektronik 748412245 RF Transformer with 2W power rating, 50Ω impedance, and 2dB insertion loss. Ideal for matching applications with dimensions of 1.6mm x 0.8mm x 0.6mm and operating temperatures from -40°C to 85°C.
TC1-1TG2+
Mini-circuits TC1-1TG2+ RF Transformer has 0.25W power rating, 3dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 400KHz to 500MHz. Dimensions are L3.81xB3.81xH3.81mm, featuring gold over nickel terminal finish and surface mounting feature.
PWB3010LC
PWB3010LC by Coilcraft is a RF Transformer with 0.25W power rating, 780uH inductance, and 0.2dB insertion loss. Ideal for SIGNAL applications, it operates b/w -40 to 85°C temperatures with a max cutoff frequency of 125MHz.
TTWB1010-1LD
Coilcraft's TTWB1010-1LD RF Transformer offers 400V isolation voltage, 0.2dB insertion loss, and 95uH primary inductance. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 30kHz to 250MHz. This surface mount transformer measures L6.35xB6.1xH4.7mm and features tin/silver/copper terminal finish.
SWB2010-1-SMLD
Coilcraft's SWB2010-1-SMLD RF Transformer offers 95uH inductance, 175MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits with a min cutoff frequency of 0.04GHz.
TC1-1T+
TC1-1T+ by Mini-circuits is a RF transformer with 0.25W power rating, 3dB insertion loss, and 1.5GHz min cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has dimensions of L3.81xB3.81xH4.06 mm for surface mounting method.
PA0907NL
PA0907NL by Pulse Electronics is a RF Transformer with inductance of 660uH, operating temperature range from -40 to 125 °C. It has dimensions of L29.46xB25.4xH10.2 mm and cutoff frequency ranging from 0.2 GHz to 0.7 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high performance capabilities.
748411245
Wurth Elektronik 748411245 RF Transformer features 1.3 dB Insertion Loss, 2400 GHz Min Cutoff Freq, and 2500 MHz Max Cutoff Freq. Ideal for RF applications with Surface mounting feature and operating temperatures from -40 to 85°C.
BALFHB-WL-05D3
BALFHB-WL-05D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.4 dB. It operates b/w -40 °C and 105 °C, covering frequencies from 862 MHz to 928 MHz, making it ideal for wireless communication applications. Its compact size (2.15mm x 1.88mm x 0.68mm) ensures easy integration into various devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved