Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's TTWB-1-ALD RF Transformer offers 400V isolation voltage, 0.6dB insertion loss, and 40uH primary inductance. Ideal for power applications with a max operating temperature of 85°C and surface mounting feature.
Median Price
$3.440
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Coilcraft
1+ parts
100+ parts
$2.950
1k+ parts
$1.730
10k+ parts
$1.500
Component Sense
-
Greenchips
SIE Connect GmbH - GreenChips
Q Components
Halfin
Speed Components Ltd
Nova Conductors
Ampacity Inc.
$2.920
Perfect Parts
Aranea Global
High isolation voltage ensures safe operation and prevents interference between different circuits.
Low insertion loss allows for efficient signal transfer with minimal loss of power.
High inductance helps in achieving better impedance matching and signal stability.
Can handle significant DC current imbalances without affecting performance.
Compact size makes it suitable for space-constrained applications.
Designed specifically for power applications, ensuring optimal performance in power circuits.
Can operate reliably at high temperatures, making it suitable for demanding environments.
Low cutoff frequency allows for handling lower frequency signals with ease.
Capable of operating in extreme cold conditions without compromising performance.
Multiple terminal finish options provide flexibility in connection methods.
Surface mount feature simplifies installation and allows for easy integration into circuit boards.
High operating frequency range enables handling of high-frequency signals with precision.
RF Transformers TTWB-1-ALD attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Application:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Maximum DC Unbalance Current:
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
TTWB-1-ALD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Diotec Electronics
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148WT
Bytesonic Electronics
TC1-1T+
Mini-circuits
TC1-1T+ by Mini-circuits is a RF transformer with 0.25W power rating, 3dB insertion loss, and 1.5GHz min cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has dimensions of L3.81xB3.81xH4.06 mm for surface mounting method.
SWB2010-1-SMLD
Coilcraft's SWB2010-1-SMLD RF Transformer offers 95uH inductance, 175MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits with a min cutoff frequency of 0.04GHz.
WB3-1TSLD
The Coilcraft WB3-1TSLD RF Transformer features 0.4 dB insertion loss, 96 uH inductance, and operates from -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 0.04 GHz up to a max of 500 MHz. This surface mount transformer is designed for RF signal processing in various electronic devices.
TCM2-33WX+
Mini-circuits TCM2-33WX+ RF Transformer has 3dB Insertion Loss, 10GHz Min Cutoff Freq, and 3000MHz Max Cutoff Freq. Ideal for RF applications with Surface mounting feature, operating b/w -40°C to 85°C.
BALF-2690-02D3
BALF-2690-02D3 by STMicroelectronics is an RF transformer ideal for wireless applications. It features a low insertion loss of 1.2 dB, operates b/w 2400 MHz and 2500 MHz, and withstands temperatures from -40 °C to 85 °C. Its compact surface mount design ensures efficient integration in devices.
DXW21BN2511NL
Murata Manufacturing
Murata Manufacturing's DXW21BN2511NL RF Transformer has 1 dB insertion loss, operates from -40 to 85°C, with a cutoff frequency of 13.56 GHz. It is a surface mount transformer suitable for various RF applications.
TC1-1-43A+
TC1-1-43A+ by Mini-circuits is a RF transformer with 2 dB insertion loss, operating from -40 to 85°C. It has dimensions of L3.81xB3.81xH4.06 mm and supports frequencies up to 4000 MHz. Ideal for surface mount applications in RF circuits requiring high-frequency transformation.
TC1-1-13M+
Mini-circuits TC1-1-13M+ RF Transformer has 0.25W power rating, 3dB insertion loss, and max DC unbalance current of 30mA. Ideal for signal applications with a min cutoff frequency of 4.5GHz and operating temp range from -40 to 85°C.
TCM1-63AX-2+
The Mini-circuits TCM1-63AX-2+ RF Transformer has an insertion loss of 2.5 dB, operates b/w -40 to 85°C, with a cutoff frequency range from 10 MHz to 6 GHz. It is a surface-mount transformer ideal for RF applications requiring precise signal transformation in compact spaces.
BALF-NRF01J5
BALF-NRF01J5 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.4 dB, operates b/w -40 °C to 85 °C, and covers frequencies from 2400 MHz to 2540 MHz. Its surface mount design ensures easy integration into devices.
BALFHB-WL-02D3
RF TRANSFORMER;
TC1-1-13M-34+
Mini-circuits TC1-1-13M-34+ RF Transformer features 1.5 dB Insertion Loss, 47 GHz Min Cutoff Freq, and 1400 MHz Max Cutoff Freq. Ideal for RF applications requiring Surface mounting with TR packing method in a compact design suitable for temperatures ranging from -40 to 85°C.
X4BD130LTI
Ttm Technologies
X4BD130LTI by Ttm Technologies is an RF Transformer with 1dB Insertion Loss, 9200 GHz Min Cutoff Frequency, and 16150 MHz Max Cutoff Frequency. Ideal for applications requiring high-frequency signal transformation in compact spaces due to its small dimensions of 0.62mm H x 0.94mm W x 1.69mm L.
DXW21BN7511TL
Murata Manufacturing's DXW21BN7511TL RF Transformer has 1 dB insertion loss, operates b/w -40°C to 85°C, and supports a cutoff frequency range of 50 GHz to 1200 MHz. This surface mount transformer with dimensions of L2.0xB1.2xH1.2 (mm) is ideal for RF applications requiring high-frequency signal transformation.
748412245
Wuerth Elektronik & Kg
Wurth Elektronik 748412245 RF Transformer with 2W power rating, 50Ω impedance, and 2dB insertion loss. Ideal for matching applications with dimensions of 1.6mm x 0.8mm x 0.6mm and operating temperatures from -40°C to 85°C.
PWB2010-1LB
Coilcraft's PWB2010-1LB RF Transformer offers low insertion loss of 0.2 dB and inductance of 95 uH. With a max cutoff frequency of 250 MHz, it is ideal for RF applications requiring surface mounting method. Operating temperature ranges from -40 to 85 °C, making it suitable for various electronic devices.
TCM1-63AX+
TCM1-63AX+ by Mini-circuits is a RF transformer with a power rating of 0.2W and insertion loss of 2.5dB. It is commonly used in signal applications, with a max operating temperature of 85°C and min cutoff frequency of 10GHz.
MABA-007159-000000
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 4.5 GHz; Dimensions: L3.81XB3.81XH2.79 (mm); Length: 3.81 mm; Width: 2.79 mm;
B0310J50100AHF
B0310J50100AHF by Ttm Technologies is a RF transformer with 1 dB insertion loss, suitable for surface mount applications. It has dimensions of L2.04XB1.29XH0.76 (mm) and can operate at temperatures ranging from -55 to 140 °C. With a max cutoff frequency of 1000 MHz, it is ideal for high-frequency signal processing in various electronic devices.
ADT1-1WT-1+
The Mini-circuits ADT1-1WT-1+ RF Transformer has a power rating of 0.25W, insertion loss of 1dB, and max DC unbalance current of 30mA. Ideal for signal applications with freq range from 1MHz to 400MHz. Dimensions L7.87xB5.59xH2.84mm, operating temp -20°C to 85°C, surface mount type with Tin-Nickel finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TTWB2040LB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Minimum Cutoff Frequency: .15 GHz; Maximum Operating Temperature: 85 Cel; Additional Features: IMPEDANCE RATIO IS 1:4;
TTWB2040
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: TTWB; Terminal Finish: Tin/Lead (Sn/Pb); Turns Ratio (Np:Ns): 1:4; Additional Features: IMPEDANCE RATIO 1:4;
TTWB2040LD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum DC Unbalance Current: 250 mA; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Application: POWER;
TTWB-1-BLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Length: 6.48 mm; JESD-609 Code: e1; Minimum Cutoff Frequency: .13 GHz;
TTWB-4-BLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Additional Features: IMPEDANCE RATIO IS 1:4; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e1;
TTWB1010-1LD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Inductance (Primary): 95 uH; Dimensions: L6.35XB6.1XH4.7 (mm); Packing Method: TR, EMBOSSED PLASTIC, 13 INCH;
TTWB-1-CLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Inductance (Primary): 22 uH; Dimensions: L6.35XB6.1XH4.7 (mm); Isolation Voltage: 400 V;
TTWB1010LD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Application: POWER; No. of Winding (Secondary): 1; Height: 4.7 mm;
TTWB3010-1LD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Length: 6.48 mm; No. of Winding (Primary): 1; No. of Winding (Secondary): 1;
TTWB-16-BLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Application: POWER; Minimum Cutoff Frequency: .075 GHz; Packing Method: TR;
TTWB-16-BLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Width: 6.1 mm; Maximum DC Unbalance Current: 250 mA; No. of Winding (Secondary): 1;
TTWB-4-ALD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Width: 6.1 mm; Additional Features: IMPEDANCE RATIO IS 1:4; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH;
TTWB1010
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: TTWB; Terminal Finish: Tin/Lead (Sn/Pb); Length: 6.35 mm; Minimum Cutoff Frequency: .0035 GHz;
TTWB2010LD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Winding (Primary): 1; Dimensions: L6.35XB6.1XH4.7 (mm); No. of Winding (Secondary): 1;
TTWB-1-A
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: TTWB; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: IMPEDANCE RATIO 1:1; Application: MATCHING;
TTWB-1-ALB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Winding (Secondary): 1; Minimum Operating Frequency: 80 KHz; Isolation Voltage: 400 V;
TTWB-16-ALD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 85 Cel; Length: 6.48 mm; Maximum DC Unbalance Current: 250 mA;
TTWB1010-1LB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Minimum Cutoff Frequency: .03 GHz; Minimum Operating Temperature: -40 Cel; Width: 6.1 mm;
TTWB1010LB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Width: 6.1 mm; Minimum Cutoff Frequency: .0035 GHz; Additional Features: IMPEDANCE RATIO IS 1:1;
TTWB1040LB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Packing Method: TR; Isolation Voltage: 400 V; Load Resistance: .16 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved