Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SER2915L-153KL by Coilcraft is a shielded, surface mount power inductor with 15uH nominal inductance. It has a max rated current of 30A and operates b/w -40 to 85°C. Ideal for general purpose applications requiring high performance and reliability in compact designs.
Median Price
$4.455
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Coilcraft
1+ parts
$3.210
100+ parts
-
1k+ parts
$2.150
10k+ parts
$1.790
Mouser Electronics
$5.700
$3.590
$3.190
DigiKey Marketplace
$4.010
Vyrian
Nova Conductors
Connector Distribution Corp
Right Parts Inc.
Semtec, LLC
Ampacity Inc.
$2.730
Continental Prestige Electronics
$3.700
$2.840
Aranea Global
This product can be easily mounted on a PCB surface, making it convenient for installation.
The shielding helps in reducing electromagnetic interference, enhancing the performance of the inductor.
The inductor has a suitable inductance value for power applications, making it an ideal choice for various circuit designs.
With a high maximum rated current, this inductor can handle heavy loads, ensuring reliable operation in power circuits.
The SMT package style offers a compact design, saving space on the PCB and allowing for efficient circuit layout.
Ferrite core material provides high magnetic permeability, making the inductor efficient in energy storage and transfer.
Fixed Inductors SER2915L-153KL attributes and parameters. Explore more Fixed Inductors devices from Coilcraft
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
SER2915L-153KL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Transistor & Electronic
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Temic Semiconductors
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
XAL6030-222MEC
Coilcraft XAL6030-222MEC is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 10A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.01397 ohm and self-resonance frequency of 30MHz.
B82732F2601B001
TDK
The TDK B82732F2601B001 is a fixed inductor with 68000 uH nominal inductance, 0.6 A max rated current, and -40 to 125 °C operating temperature range. Ideal for power applications, this general purpose inductor features a rectangular package with dual in-line terminals.
B82476A1473M000
The TDK B82476A1473M000 is a surface mount fixed inductor with 47uH nominal inductance, 1.8A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
B82422-A1103-K100
Siemens B82422-A1103-K100 is a surface mount fixed inductor with 10uH nominal inductance, 0.18A max current, and 1.6 ohm DC resistance. Ideal for RF applications due to its 25MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
36501E16NJTDG
TE Connectivity
TE Connectivity's 36501E16NJTDG is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.016 uH and max rated current of 0.56 A, making it ideal for RF applications. With a self-resonance frequency of 3100 MHz and compact size (1.27mm x 0.76mm x 0.61mm), it suits general purpose inductor needs.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
NRS4012T100MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4012T100MDGJ is a fixed inductor with 10uH nominal inductance, 1.1A max current, and 30MHz self-resonance freq. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -25°C to 125°C.
CBMF1608T100K
CBMF1608T100K by Taiyo Yuden is a 0603 fixed inductor with 10uH nominal inductance, 0.115A max current, and 32MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 105°C.
DR125-470-R
Eaton Corporation
Eaton Corporation's DR125-470-R is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 2.71A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
SRU2013-150Y
Bourns
Bourns SRU2013-150Y is a shielded, surface mount inductor with 15uH nominal inductance and 0.85 ohm DC resistance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.46A. Its ferrite core and self-resonance frequency of 30MHz make it suitable for general purpose use.
1277AS-H-1R0M=P2
Murata Manufacturing
1277AS-H-1R0M=P2 by Murata is a shielded, dual-ended fixed inductor with 1uH nominal inductance. Ideal for power applications, it has a max rated current of 3.1A and operates b/w -40°C to 85°C. Its compact SMT package measures 3.2mm x 2.5mm x 1.2mm, making it suitable for general purpose inductor needs.
SRR1210-470M
Bourns SRR1210-470M is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 3.8A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 4.5MHz and DC resistance of 0.072 ohm.
IHLP1616ABER2R2M11
Vishay Intertechnology
IHLP1616ABER2R2M11 by Vishay Intertechnology is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 2.75 A. It is a high current inductor suitable for general purpose applications, featuring a self-resonance frequency of 49 MHz and DC resistance of 0.0835 ohm.
DRA74-100-R
Eaton Corporation's DRA74-100-R is a shielded fixed inductor with 10uH nominal inductance, 2.97A max current, and -40 to 165°C operating range. Ideal for general purpose applications requiring compact SMT package (7.6x7.6x4.35mm) with 20% tolerance and low DC resistance (0.043 ohm).
DRA74-4R7-R
DRA74-4R7-R by Eaton Corp is a shielded fixed inductor with 4.7uH nominal inductance, 165°C max operating temp, and 4.38A max rated current. Ideal for general purpose applications requiring a compact SMT package with high temperature tolerance and low DC resistance.
NRS4018T100MDGJ
NRS4018T100MDGJ by Taiyo Yuden is a fixed inductor with 10uH nominal inductance, 1.2A max rated current, and 125°C max operating temp. Ideal for power applications, this SMT inductor features a ferrite core, 0.18 ohm DC resistance, and dual-ended terminals for efficient performance.
HC2LP-4R7-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Tolerance: 20 %;
DRA127-330-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
MLZ2012M150WTD25
MLZ2012M150WTD25 by TDK is a 15uH fixed inductor with 0.95ohm DC resistance, suitable for general purpose applications. It features dual-ended terminals, ferrite core material, and operates b/w -55°C to 125°C. Ideal for surface mount designs requiring compact rectangular package size (0805) and rated at 0.25A max current.
DR74-330-R
Eaton Corporation's DR74-330-R is a shielded, dual-ended fixed inductor with 33uH nominal inductance. Ideal for power applications, it operates b/w -40°C to 125°C with a max rated current of 1.41A. Its compact SMT package measures 7.6mm x 7.6mm x 4.35mm and features matte tin over nickel terminal finish for efficient performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SER2918H-103KL
Coilcraft SER2918H-103KL is a shielded SMT inductor with 10uH nominal inductance, 28A max current, and 20MHz self-resonance freq. Ideal for power applications due to its high temp range (-40°C to 85°C) and AEC-Q200 standard compliance.
SER2918H-223KL
Coilcraft's SER2918H-223KL is a shielded, surface mount inductor with 22uH nominal inductance and 28A max rated current. Ideal for power applications, this general purpose inductor features a ferrite core, GULL WING terminals, and operates b/w -40 to 85°C.
SER2915L-103KL
Coilcraft SER2915L-103KL is a shielded SMT inductor with 10uH nominal inductance, 30A max current, and 85°C max operating temp. Ideal for power applications due to its general purpose design and ferrite core material.
SER2915L-682KL
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SER2918H-153KL
Coilcraft SER2918H-153KL is a shielded, surface mount power inductor with 15uH nominal inductance and 28A max rated current. Ideal for general purpose applications, it features a self-resonance frequency of 16MHz and operates b/w -40°C to 85°C.
SER2915H-682KL
SER2918H-333KL
SER2011-202MLD
SER2915H-103KL
SER2915L-332KL
SER2010-102MLD
SER2915H-153KL
SER2009-301MLD
SER2211-123MED
SER2915H-223KL
SER2915L-472KL
SER2009-202MLD
SER2012-601MLD
SER2013-472MLD
SER2211-532MED
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved