Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; No. of Winding (Secondary): 1; Power Rating: .25 W; Height: 4.45 mm;
Median Price
$2.450
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Coilcraft
1+ parts
$1.840
100+ parts
-
1k+ parts
$1.160
10k+ parts
$0.950
Mouser Electronics
$3.060
$2.220
$1.770
RF Transformers PWB3015LC attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Application:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Maximum DC Unbalance Current:
Height:
Insertion Loss:
Isolation Voltage:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
PWB3015LC Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Leshan Radio
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
MABAES0060
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: E; Terminal Finish: Matte Tin (Sn); Dimensions: 3.81mm X 3.81mm X 3.8mm; Insertion Loss: 1.5 dB;
TC1-1-13MG2
Mini-circuits
Mini-circuits TC1-1-13MG2 RF Transformer has 50Ω impedance, 3.02 dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 4.5 kHz to 3 GHz, this surface-mount transformer is compact at 3.81mm x 3.81mm x 3.81mm in size.
BALF-112X-01D3
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
2-1-1D
Bourns
The Bourns 2-1-1D RF Transformer has a 3 dB insertion loss and operates b/w 0.05 GHz to 200 MHz. With dimensions of L7.62xB6.85xH6.35 mm, it is ideal for through-hole mounting in RF applications requiring a 1:1 turns ratio.
TCM1-63AX+
TCM1-63AX+ by Mini-circuits is a RF transformer with a power rating of 0.2W and insertion loss of 2.5dB. It is commonly used in signal applications, with a max operating temperature of 85°C and min cutoff frequency of 10GHz.
ADT2-1T
Mini-circuits' ADT2-1T RF Transformer has a power rating of 0.25W with insertion loss of 3dB. It is ideal for matching applications, operating b/w -20 to 85°C, and supports frequencies from 400KHz to 450MHz. This surface mount transformer features dimensions of L7.87xB5.59xH2.84mm and can handle max DC unbalance current of 30mA.
BALFHB-WL-01D3
BALFHB-WL-01D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of 1.45 dB and operates b/w -40 °C to 105 °C. It features a compact size of 2.15mm x 1.88mm x 0.68mm, ideal for high-frequency applications starting at 862 GHz. This component enhances signal integrity in wireless communication systems.
ETC1-1T-5TR
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
BALFHB-WL-04D3
BALFHB-WL-04D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.5 dB. It operates b/w 862 MHz and 928 MHz, making it ideal for high-frequency applications. With a compact size of 2.15 x 1.88 x 0.68 mm, it withstands temperatures from -40 °C to +105 °C.
TT1-6-KK81+
The Mini-circuits TT1-6-KK81+ RF Transformer has a power rating of 0.25W and insertion loss of 3dB. With dimensions L7.62xB6.86xH5.84 (mm), it is ideal for matching applications in the frequency range from 4KHz to 300MHz, with a max operating temperature of 85°C.
SWB3010-SMLD
Coilcraft's SWB3010-SMLD RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits requiring precise signal transformation with a min cutoff frequency of 0.005GHz.
NCR2-113+
NCR2-113+ by Mini-circuits is an RF transformer with 2.7 dB insertion loss, operating temperature range of -40 to 85 °C, and cutoff frequency from 3.5 GHz to 11 GHz. Ideal for surface mount applications in RF circuits due to compact dimensions of L2.49xB2.01xH0.89 mm and TR packing method.
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
TC1-1-13M-75X+
Mini-circuits TC1-1-13M-75X+ RF Transformer features 3dB insertion loss, 4.5 GHz min cutoff freq, and 3000 MHz max cutoff freq. Ideal for surface mount applications in RF circuits with temp range -40 to 85°C.
MABA-007159-000000
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 4.5 GHz; Dimensions: L3.81XB3.81XH2.79 (mm); Length: 3.81 mm; Width: 2.79 mm;
ADT1-1WT+
Mini-circuits' ADT1-1WT+ RF Transformer has 3 dB insertion loss, 0.5 W power rating, and 800 MHz max cutoff frequency. Ideal for matching applications, it operates b/w -20 to 85 °C with a turns ratio of 1:1 in a compact L7.87XB5.59XH2.84 mm surface mount design.
TTWB2040LB
Coilcraft's TTWB2040LB RF Transformer offers 400V isolation voltage, 0.4dB insertion loss, and 25uH primary inductance. Ideal for POWER applications with a frequency range from 150KHz to 400MHz. Dimensions of 6.35mm x 6.1mm x 4.7mm make it suitable for surface mount installations.
TTWB3010-1LD
The Coilcraft TTWB3010-1LD RF Transformer offers 95uH inductance, 0.2dB insertion loss, and 400V isolation voltage. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 30kHz to 250MHz. This surface mount transformer has dimensions of L6.35xB6.1xH4.7mm and is suitable for various RF circuit designs.
HHM17144A1
TDK
TDK's HHM17144A1 RF Transformer has 1.2 dB insertion loss, operates b/w -40 to 85 °C, with a cutoff frequency range of 791 GHz to 960 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high-frequency capabilities.
BD2425NNRF
Anaren
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: BD2425NNRF; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Maximum Cutoff Frequency: 2525 MHz; Packing Method: TAPE & REEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved