Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's PWB-16-ALC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.35dB insertion loss. Ideal for signal applications with a frequency range from 0.05GHz to 80MHz. This surface mount transformer has dimensions of L6.48xB7.2xH4.45mm and operates b/w -40°C to 85°C temperature range.
Median Price
$4.330
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Coilcraft
1+ parts
$3.310
100+ parts
-
1k+ parts
$1.940
10k+ parts
$1.520
Mouser Electronics
$5.350
$3.440
$3.090
Nova Conductors
Inventory MP
Bristol Electronics
Ampacity Inc.
$2.680
Aranea Global
Perfect Parts
This RF transformer can handle up to 0.25 watts of power, making it suitable for various signal applications.
With an isolation voltage of 300 volts, this RF transformer provides reliable electrical separation and prevents signal interference.
The low insertion loss of 0.35 dB ensures minimal signal loss during transmission, making this transformer efficient for signal applications.
The inductance of 75 microhenries in the primary winding helps in optimizing signal transfer and maintaining signal integrity.
With a maximum operating temperature of 85°C, this RF transformer can withstand high temperatures, ensuring reliable performance in various environments.
RF Transformers PWB-16-ALC attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Application:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Maximum DC Unbalance Current:
Height:
Insertion Loss:
Isolation Voltage:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
PWB-16-ALC Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
1N4148WT
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Bkc Semiconductors
TTWB1010-1LD
Coilcraft's TTWB1010-1LD RF Transformer offers 400V isolation voltage, 0.2dB insertion loss, and 95uH primary inductance. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 30kHz to 250MHz. This surface mount transformer measures L6.35xB6.1xH4.7mm and features tin/silver/copper terminal finish.
ADT4-1T-2
Mini-circuits
Mini-circuits' ADT4-1T-2 RF Transformer features 3 dB insertion loss, 0.2 GHz min cutoff frequency, and 100 °C max operating temp. Ideal for surface mount applications in RF circuits with a freq range of 0.2 GHz to 350 MHz.
BALF-2690-02D3
STMicroelectronics
BALF-2690-02D3 by STMicroelectronics is an RF transformer ideal for wireless applications. It features a low insertion loss of 1.2 dB, operates b/w 2400 MHz and 2500 MHz, and withstands temperatures from -40 °C to 85 °C. Its compact surface mount design ensures efficient integration in devices.
WBC4-4LB
The Coilcraft WBC4-4LB RF Transformer features 1 dB insertion loss, 9 uH primary inductance, and operates b/w -40 to 85 °C. Ideal for applications requiring a min cutoff frequency of 0.25 GHz up to a max of 800 MHz. Suitable for surface mount installations with dimensions L4.45xB4.19xH3.05 mm.
HHM1711Q1
TDK
TDK's HHM1711Q1 RF Transformer features 1 dB insertion loss, 2300 GHz min cutoff frequency, and 3800 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with operating temperatures ranging from -40 to 85°C.
ETC1-1-13TR
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1-13; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 3000 MHz; Width: 2.79 mm;
BALF-CC26-05D3
STMicroelectronics' BALF-CC26-05D3 RF Transformer features 1.5 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
BALF-NRF01J5
BALF-NRF01J5 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.4 dB, operates b/w -40 °C to 85 °C, and covers frequencies from 2400 MHz to 2540 MHz. Its surface mount design ensures easy integration into devices.
ETC1-1-13
ETC1-1-13 RF Transformer by Tyco Electronics M/a-com features 3.5 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C and comes in tape & reel packaging.
HHM1520A2
The TDK HHM1520A2 RF Transformer has 1 dB insertion loss, operates b/w -40 to 85°C, and supports frequencies from 2300 MHz to 2500 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L2xB1.25xH0.95 mm on reel packaging.
MABA-007159-000000
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Maximum Operating Frequency: 3000000 KHz; No. of Winding (Secondary): 1; Minimum Operating Frequency: 4500 KHz;
P3801
Etal Group Ab
P3801 RF Transformer by Etal Group Ab features 1.5 dB insertion loss, 0.0002 GHz min cutoff frequency, and 0.004 MHz max cutoff frequency. Ideal for applications requiring high-frequency signal transformation with approvals from IEC, CUL, and UL.
2450BM15A0015E
Johanson Technology
Johanson Technology's 2450BM15A0015E RF Transformer features 1.5 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of L2.0xB1.25xH0.8 (mm).
HHM1589B1
TDK's HHM1589B1 RF Transformer offers low insertion loss of 1.4 dB, with a wide operating temperature range from -40°C to 85°C. This surface mount transformer has dimensions of L2.0xB1.25xH0.95 (mm) and is ideal for applications requiring high-frequency signal conversion up to 710 MHz, such as in RF communication systems or wireless devices.
WB4-1HSLD
The Coilcraft WB4-1HSLD RF Transformer features 25uH primary inductance, 0.5dB insertion loss, and a frequency range from 0.1GHz to 500MHz. Ideal for surface mount applications in RF circuits, this transformer operates b/w -40°C to 85°C with matte tin terminal finish.
TT1-6-KK81
The Mini-circuits TT1-6-KK81 RF Transformer features 3 dB insertion loss, 0.004 GHz min cutoff frequency, and 300 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a turns ratio of 1:1.
LDB21924M05C-001
Murata Manufacturing
Murata's LDB21924M05C-001 RF Transformer offers low 1.4 dB insertion loss, operates b/w -40 to 85°C, with cutoff frequency ranging from 889 MHz to 960 MHz. Ideal for surface mount applications in RF circuits due to compact dimensions of L2.0xB1.25xH0.95 mm.
MABACT0059
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: MABACT0059; Length: 3.81 mm; Packing Method: TR; Maximum Operating Temperature: 85 Cel;
1812WBT-5LC
1812WBT-5LC by Coilcraft is an RF Transformer with 1.5 dB Insertion Loss, 0.09 uH Primary Inductance, and a Max Cutoff Frequency of 645 MHz. Ideal for high-frequency applications in electronics requiring precise signal transformation and low loss transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PWB1010-1LC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Maximum Cutoff Frequency: 250 MHz; Minimum Cutoff Frequency: .03 GHz; Height: 4.45 mm;
PWB1010LC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Isolation Voltage: 300 V; Width: 6.48 mm; Insertion Loss: .2 dB;
PWB1010LB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER COPPER/TIN OVER NICKEL; Width: 6.48 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 125 MHz;
PWB-1-ALB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER COPPER/TIN OVER NICKEL; Insertion Loss: .6 dB; Additional Features: HEIGHT DIM INCLUDES TERMINAL ALSO; Inductance (Primary): 40 uH;
PWB-16-BLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER COPPER/TIN OVER NICKEL; Length: 6.77 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: .075 GHz;
PWB-1-ALC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Additional Features: HEIGHT DIM INCLUDES TERMINAL ALSO; Minimum Operating Temperature: -40 Cel; No. of Winding (Secondary): 1;
PWB-1-BLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER COPPER/TIN OVER NICKEL; Length: 6.77 mm; Dimensions: L6.48XB7.2XH4.45 (mm); Minimum Cutoff Frequency: .13 GHz;
PWB-1-BLC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Length: 6.77 mm; Packing Method: TR, EMBOSSED PLASTIC, 7 INCH; Insertion Loss: .4 dB;
PWB-1-CLC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Additional Features: HEIGHT DIM INCLUDES TERMINAL ALSO; Width: 6.48 mm; Height: 4.45 mm;
PWB-1.5-ALC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Maximum Operating Temperature: 85 Cel; Insertion Loss: .35 dB; Width: 6.48 mm;
PWB-1.5-BLC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; No. of Winding (Secondary): 1; Minimum Operating Temperature: -40 Cel; Minimum Cutoff Frequency: .5 GHz;
PWB-1.5-CLC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Packing Method: TR, EMBOSSED PLASTIC, 7 INCH; Load Resistance: .12 ohm; Inductance (Primary): 140 uH;
PWB-16-BLC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Dimensions: L6.48XB7.2XH4.45 (mm); Height: 4.45 mm; Insertion Loss: .3 dB;
PWB1015LC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Height: 4.45 mm; No. of Winding (Primary): 1; Power Rating: .25 W;
PWB1040LC
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; Minimum Operating Temperature: -40 Cel; Maximum DC Unbalance Current: 250 mA; Insertion Loss: .4 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved