Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver (Sn/Ag); Dimensions: L15.24XB24.51XH7.87 (mm); Maximum Input Voltage (V): 23; No. of Winding (Secondary): 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers FL2015-2LB attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Height:
Maximum Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
FL2015-2LB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358N
Fairchild Semiconductor
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
750311608
Wuerth Elektronik & Kg
Wurth Elektronik 750311608 is a SMPS transformer with 2 primary windings, inductance of 12uH, and TR packing. It has secondary windings, L29.08xB23.11xH11.43mm dimensions, and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount transformer with an output voltage of 24V and input voltage range of 30-75V.
HA3803-ALD
Coilcraft
Coilcraft's HA3803-ALD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V and 6V output voltages. With a compact size of L17.2xB14.98xH8.51mm, it operates b/w -40 to 125°C and can handle input voltages from 24V to 57V at frequencies up to 125KHz, making it ideal for surface mount power supply designs.
WA8759-AL
Coilcraft's WA8759-AL is an AEC-Q200 approved SMPS transformer with 1500uH primary inductance. It has 2 secondary windings, operates b/w -40°C to 125°C, and outputs 15V. Ideal for surface mount applications in automotive electronics due to its wide input voltage range of 40V to 1000V.
POE30P-33LD
Coilcraft's POE30P-33LD is a 3W SMPS transformer with primary inductance of 310000uH. It has two windings each for primary and secondary, outputting 12V and 3.3V. Ideal for surface mount applications with operating temperatures from -40 to 85°C, suitable for power supplies up to 72V input voltage at frequencies up to 250 KHz.
ETH1-230LD
Coilcraft's ETH1-230LD is a SMPS transformer with 2 primary windings, 350uH inductance, and dimensions of L16.51xB14.73xH7.0 mm. It operates b/w -40 to 85°C and has Tin/Silver/Copper terminal finish. Ideal for surface mount applications in power supplies and converters.
HA3803-BLD
Coilcraft's HA3803-BLD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V output voltage. With TR packing and dimensions L17.2xB14.98xH8.626 (mm), it operates b/w -40 to 125 °C, ideal for surface mounting in compact electronic devices.
MA5597-AL
Coilcraft's MA5597-AL is a 6W SMPS transformer with 2 primary windings, 2.22uH inductance, and 12V output voltage. Ideal for applications requiring a min input voltage of 85V and max input voltage of 265V. Through-hole mounted design with dimensions of 27.94mm x 24.13mm x 27.94mm.
32588
Pico Electronics
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Dimensions: L12.57XBW12.57XH9.27 (mm); Output Voltage-1: 150 V; JESD-609 Code: e0;
78250JC
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
POE51Q-24ED
Coilcraft's POE51Q-24ED SMPS Transformer has a power rating of 51W, inductance of 22.2uH, and output voltage of 24V. AEC-Q200 approved for automotive applications with operating temperatures from -40 to 125°C. Ideal for surface mounting in various power supply designs.
PA2517NL
Pulse Electronics
PA2517NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 1200 uH, and dimensions of L18.2xB16.0xH18.0 (mm). It operates b/w -40 to 130 °C and has an output voltage of 12 V. Ideal for applications requiring a max input voltage of 400V, operating at frequencies up to 60 KHz through hole mounting.
ZA9671-BED
ZA9671-BED by Coilcraft is a 12.5W SMPS Transformer with 2 primary windings at 9uH inductance. It operates b/w -40 to 85°C, outputs 5V at max frequency of 300KHz. Ideal for surface mount applications in automotive electronics due to AEC-Q200 approval and compact size (13.21x10.92x10mm).
PA5131.004NLT
PA5131.004NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH, operating at -40 to 130°C. It has two windings for both primary and secondary outputs of 3.3V, suitable for surface mount applications in power supplies up to 200KHz frequency.
7491196212
7491196212 by Wuerth Elektronik & Kg is a SMPS transformer with an inductance of 128 uH. It has two secondary windings and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a 12 V output voltage.
PL160-100L
Coilcraft PL160-100L is a 160W SMPS transformer with 2 primary windings and inductance of 246uH. It operates b/w -40 to 125°C, suitable for AEC-Q200 applications like automotive power supplies. With dimensions of 23.37x20.83x8.94mm, it supports input voltages from 36V to 72V at frequencies ranging from 200kHz to 700kHz, featuring matte tin finish and surface mounting feature.
RA6992-BL
Coilcraft's RA6992-BL SMPS Transformer has a power rating of 250W, with 2 primary windings and an isolation voltage of 1500V. It is designed for applications requiring a transformer with inductance of 50uH, operating b/w -40°C to 85°C, and outputting at 12V. Ideal for surface mount setups, it features a turns ratio of 8T:4T and can handle input voltages ranging from 48V to 60V.
749119533
Wuerth Elektronik & Kg 749119533 SMPS Transformer with 54uH primary inductance, 2 secondary windings, and max operating temp of 125°C. Outputs at 3.3V, suitable for surface mount applications in electronics requiring input voltage range of 33-57V.
POE13P-12LB
Coilcraft's POE13P-12LB is a 13W SMPS transformer with 2 primary windings and inductance of 127000uH. It operates b/w -40°C to 85°C, has output voltages of 12V, and dimensions of L13.46xB13.0xH12.32mm. Ideal for surface mount applications in power over Ethernet systems up to 72V input voltage and 250KHz frequency.
PH0815CNL
PH0815CNL by Pulse Electronics is a 160W SMPS Transformer with primary inductance of 327uH. It has 3 primary windings and 2 secondary windings, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies and converters.
Q4343-BL
Coilcraft Q4343-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has two secondary windings, outputting 12V each, suitable for power applications. With dimensions of L27.94xB27.94xH24.13 mm, it operates b/w -40°C to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved