Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's DA2304-ALD is a 7.2W power transformer with 2500V isolation voltage, suitable for AEC-Q200 applications. It features dual 3.3V primary rating, 17.8uH inductance, and operates at frequencies up to 150KHz. Ideal for power systems requiring compact dimensions and high reliability in harsh environments.
Median Price
$4.350
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Coilcraft
1+ parts
$3.480
100+ parts
-
1k+ parts
$2.500
10k+ parts
$1.540
DigiKey
$5.220
$4.500
Nova Conductors
$2.380
DigiKey Marketplace
$4.000
Vyrian
EMSNET
Benley Electronics
$0.750
Corohmni
Continental Prestige Electronics
$2.332
Argo Parts USA
Netroflash
$2.261
$2.213
Semicontronic
$2.720
$2.652
$2.638
Ampacity Inc.
Aztec Data Supply Inc.
$4.020
Perfect Parts
Kepictronics
The high power rating of 7.2 W ensures that this transformer can handle heavy loads and provide stable power output.
The AEC-Q200 approval ensures that this transformer meets the quality and reliability standards required for automotive applications.
The high isolation voltage of 2500 V ensures safety and protection against electrical hazards in the circuit.
The high maximum operating temperature of 125°C allows this transformer to operate efficiently in high temperature environments.
The high nominal operating frequency of 150 KHz allows for efficient power conversion and reduced electromagnetic interference.
The surface mounting feature makes it easy to install and integrate this transformer into electronic circuits.
Power & Mains Transformers DA2304-ALD attributes and parameters. Explore more Power & Mains Transformers devices from Coilcraft
Application:
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Minimum Input Voltage (V):
Nominal Input Voltage (V):
Isolation Voltage:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Rating (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
DA2304-ALD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Meritek Electronics
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1246
Amecon
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Output Current-1: 14.29 A; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 400 VA;
1089
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 30 VA; Output Current-1: 1 A;
1152
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 100 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: 2.08 A;
1251
TOROIDAL POWER TRANSFORMER; Output Current-1: 11.11 A; Volt-Ampere Rating (VA): 400 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
74941301
Wuerth Elektronik & Kg
Wurth Elektronik 74941301 is a surface mount power transformer with AEC-Q200 approval and 4300V isolation voltage. It operates b/w -40°C to 125°C, suitable for automotive applications due to its compact size of 8.9mm x 7.6mm x 5.5mm.
DA2304-ALB
Coilcraft's DA2304-ALB is a Power Transformer with 7.2W power rating, 17.8uH inductance, and 2500V isolation voltage. Ideal for POWER applications, it operates b/w -40 to 125°C with dual 3.3V primary rating and a turns ratio of 1:2.2 for efficient energy transfer at a frequency of 150KHz.
4AM6442-8JD40-0FA0
Siemens
Siemens 4AM6442-8JD40-0FA0 is a power transformer with a rating of 230/400V and a VA of 2000. It has two secondary windings, providing output voltages of 115V each. This chassis mount transformer is suitable for various applications in power and mains systems.
12.8-2
Bel Fuse
Bel Fuse's 12.8-2 Power Transformer features dual 2A output currents, 6.4V output voltages, and a center tap on both windings for isolation voltage of 1500V. Ideal for chassis mounting applications requiring a single primary rating of 115V at a nominal frequency of 50/60Hz.
F-46X
Magnetek
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; Nominal Operating Frequency: 50/60 HZ; Application: POWER; No. of Winding (Secondary): 1;
DST-2-24
Bel Fuse's DST-2-24 is a split bobbin power transformer with dual 115/230V primary rating. It offers 2500V isolation voltage, 1.1VA VA rating, and two windings for 12V output each. Ideal for applications requiring reliable power conversion in compact spaces.
ST-2-12
Bel Fuse's ST-2-12 Split Bobbin Power Transformer has 2500V isolation voltage, 1.1VA VA rating, and dual 6.3V output voltages. Ideal for applications requiring UL/CSA approvals, it features two windings and compact dimensions of L34.9xB28.6xH24.6mm for through-hole mounting in power systems at 50/60Hz frequency.
VTX-120-006-524
Vigortronix Uk
VTX-120-006-524 by Vigortronix UK is a CE approved power transformer with 3750V isolation voltage, 6VA VA rating, and dual 110/130V primary rating. It has two secondary windings producing 24V output each. Ideal for applications requiring reliable power conversion in compact spaces.
80-2
Bel Fuse 80-2 power transformer with 2A output current, 40V output voltage, and 1500V isolation voltage. Ideal for chassis mounting applications requiring a center tap feature and dual windings. Dimensions of 104.8mm x 85.7mm x 87.3mm make it suitable for various power & mains transformer setups at a nominal frequency of 50/60Hz.
VTX-120-012-509
VTX-120-012-509 by Vigortronix UK is a CE-approved power transformer with 3750V isolation voltage, 12VA VA rating, and dual 110/130V primary rating. It has two secondary windings producing 9V output each. Ideal for applications requiring reliable power conversion in compact spaces.
STM1696611
Analog Devices
Analog Devices' STM1696611 is a 5 VA power transformer with 500V isolation voltage. Operating at -55 to 105°C, it outputs 11.8V at 400Hz frequency. Ideal for applications requiring reliable power conversion in compact spaces.
F-187U
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; Rating (Primary): SINGLE 115V; Height: 88.9 mm; Output Current-1: 4 A;
DSW-412
Stancor Products
The Stancor Products DSW-412 is a UL and CSA approved power transformer with 6 VA rating, 0.5 A output current, and operating temperatures from -40 to 105 °C. Ideal for various applications requiring a reliable power source at 60 HZ frequency.
10-4
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Center Tap Feature-1: YES; No. of Winding (Secondary): 2; Output Voltage-2: 5 V;
1267
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 500 VA; Nominal Operating Frequency: 60 HZ; Output Current-1: 4.35 A;
CTX110607-R
Eaton Corporation
CTX110607-R by Eaton Corp is a 6VA power transformer with output voltage of 1340V and current of 0.011A. Ideal for surface mount applications, it operates b/w 0-70°C, making it suitable for various electronic devices. Dimensions: L21.0xB16.5xH5.9 (mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DA2303-ALD
Coilcraft's DA2303-ALD is a power transformer with AEC-Q200 approval and 2500V isolation voltage. It has dual 6V output voltages, operates b/w -40°C to 125°C, and supports a nominal input voltage of 5V. Ideal for surface mount applications in automotive electronics due to its compact dimensions of L12.07xB10.0xH5.97 mm.
DA2303-ALB
Coilcraft's DA2303-ALB is a power transformer with 2500V isolation voltage, AEC-Q200 approval, and dual 6V output. Ideal for surface mount applications, it operates b/w -40°C to 125°C and has a nominal input voltage of 5V.
DA2303-ASD
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Lead (Sn63Pb37); Maximum Operating Temperature: 125 Cel; Rating (Primary): DUAL 5V;
DA2303-ATD
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5); JESD-609 Code: e1; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH;
DA2304-ASB
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Lead (Sn63Pb37); Width: 8.1 mm; Output Voltage-1: 6 V;
DA2304-ASD
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Lead (Sn63Pb37); No. of Winding (Secondary): 2; Center Tap Feature-1: NO;
DA2304-ATB
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5); Minimum Operating Temperature: -40 Cel; Height: 5.97 mm;
DA2304-ATD
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5); Rating (Primary): DUAL 3.3V; JESD-609 Code: e1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved