Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's 1206USB-872MLC is a data line filter with 2 functions and 4 terminals. It offers attenuation up to 32 dB at 500 MHz, ideal for applications requiring high-frequency noise suppression in compact spaces. With dimensions of L3.2xB1.6xH1.83 mm, it is suitable for surface mount installations in various electronic devices.
Median Price
$1.175
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Coilcraft
1+ parts
$0.940
100+ parts
-
1k+ parts
$0.370
10k+ parts
$0.300
DigiKey
$1.410
$0.675
DigiKey Marketplace
$1.180
VNN
Rebound Electronics
Nova Conductors
Ampacity Inc.
$0.800
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Having 2 functions allows for more effective filtering and protection for data lines.
More terminals provide a stable connection and better signal integrity.
High attenuation at maximum frequency ensures effective noise reduction and signal clarity.
Can withstand high temperatures, suitable for various environments.
Effective noise reduction starting at a relatively low frequency.
Gold finish with nickel barrier provides high conductivity and corrosion resistance.
Suitable inductance for effective filtering of data lines.
High attenuation frequency range for comprehensive noise reduction.
Low resistance ensures minimal signal loss and efficient operation.
Compact size for easy integration and space-saving design.
Can handle a rated current of 0.5 A, suitable for typical data line applications.
Even at minimum frequency, there is significant noise reduction for clear signal transmission.
Low profile design for easy mounting and installation in compact spaces.
Data Line Filters 1206USB-872MLC attributes and parameters. Explore more Data Line Filters devices from Coilcraft
Additional Features:
Maximum Attenuation Frequency:
Minimum Attenuation Frequency:
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
1206USB-872MLC Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Thinking Electronic Industrial
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Telefunken Microelectronics
Diodes Incorporated
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
World Products
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
MMZ1608R102ATA00
TDK
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
BKP1005HS121-T
Taiyo Yuden
BKP1005HS121-T by Taiyo Yuden is a 0402 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.14 ohm, and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
MMZ1005Y102CT000
The TDK MMZ1005Y102CT000 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.74 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
ILHB0805ER601V
Vishay Intertechnology
Vishay Intertechnology's ILHB0805ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies up to 100 MHz.
BK1005HM121-T
BK1005HM121-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
2506031027Y0
Fair-rite Products
Fair-rite Products' 2506031027Y0 is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.6XB0.8XH0.8 (mm), it offers a max frequency of 1000 MHz and output impedance of 1000 OHM, making it ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM15BB100SN1D
Murata Manufacturing
Murata Manufacturing's BLM15BB100SN1D is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 10 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression on data lines.
ACM7060-701-2PL-TL01
TDK's ACM7060-701-2PL-TL01 is a data line filter with 2 functions, rated at 80V and 4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L7.0xB6.0xH3.5 mm. Ideal for applications requiring noise suppression in data lines.
MPZ2012S601A
The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.
MMZ1608B601CTAH0
The TDK MMZ1608B601CTAH0 is a 0603 chip bead data line filter with 2 terminals. It features a max operating temperature of 125°C, DC resistance of 0.4 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
ACM2012-900-2P
TDK's ACM2012-900-2P is a 2-function data line filter with 4 terminals, rated voltage of 50V, and max operating temp of 85°C. Ideal for surface mount applications, it offers 0.19 ohm DC resistance, 0.4A rated current, and output impedance of 90 ohm.
742792095
Wuerth Elektronik & Kg
Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.
BLM41PG750SN1L
Murata Manufacturing's BLM41PG750SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.025 ohm and output impedance of 75 OHM at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring high-frequency filtering.
BNX022-01B
Murata Manufacturing's BNX022-01B is a 50V data line filter with 35dB attenuation at 1000MHz. With dimensions of L12.1xB9.1xH3.1mm, it operates b/w -40 to 125°C and has an output impedance of 50Ω. Ideal for applications requiring high insulation resistance and rated current up to 10A in surface mount configurations.
NUF2114MNT1G
NUF2114MNT1G by Onsemi is a Data Line Filter with 2 functions and 8 terminals. It has a max operating temperature of 85°C, DC resistance of 9.9 ohm, and output impedance of 50 ohm. Ideal for applications requiring data line filtering in compact spaces.
MPZ2012S221AT
The TDK MPZ2012S221AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.04 ohm, it is ideal for applications requiring noise suppression in electronic circuits. Its compact dimensions make it suitable for surface mount installations in various devices.
BLM18RK601SN1D
Murata's BLM18RK601SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and DC resistance of 0.6 ohm. With dimensions of 1.6x0.8x0.8mm, this filter is suitable for maintaining an output impedance of 600 ohm at frequencies ranging from 100 MHz to TAPE AND REEL packaging method.
ILHB0603ER121V
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
74270057
Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1206J0500104MXTE03
Knowles Precision Devices
FEED THROUGH CAPACITOR; Length: 3.2 mm; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Terminal Finish: MATTE TIN OVER NICKEL; Additional Features: NICKEL BARRIER TERMINATION; JESD-609 Code: e3;
1206J0500104MXTE01
FEED THROUGH CAPACITOR; Rated Current: .3 A; Rated Voltage: 50 V; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Capacitance: 100000 uF;
1206J1000473MXTE03
FEED THROUGH CAPACITOR; Rated Voltage: 100 V; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); JESD-609 Code: e3; Maximum Operating Temperature: 125 Cel;
1206USB-113MLC
Coilcraft's 1206USB-113MLC is a data line filter with 2 functions and 4 terminals. It offers attenuation up to 31 dB at 500 MHz, with inductance of 0.623 uH. Ideal for applications requiring high-frequency noise suppression in compact spaces.
1206USB-223MLB
DATA LINE FILTER; Maximum DC Resistance: .85 ohm; Minimum Operating Temperature: -40 Cel; Length: 3.2 mm; No. of Functions: 2; Packing Method: TR;
1206USB-223MLC
DATA LINE FILTER; Maximum DC Resistance: .85 ohm; Mounting Type: SURFACE MOUNT; Length: 3.2 mm; Width (mm): 1.6; No. of Terminals: 4;
1206USB-372MLC
DATA LINE FILTER; Maximum DC Resistance: .26 ohm; Rated Current: .6 A; JESD-609 Code: e4; Minimum Attenuation Frequency: 100 MHz; Attenuation At Maximum Frequency: 33 dB;
1206USB-532MLB
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .6 A; Width (mm): 1.6; Inductance: .319 uH; Dimensions: L3.2XB1.6XH1.83 (mm)/L0.126XB0.063XH0.072 (inch);
1206USB-872MBB
DATA LINE FILTER; Maximum DC Resistance: .39 ohm; Minimum Attenuation Frequency: 10 MHz; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE AND REEL; JESD-609 Code: e4;
1206USB-872MBC
DATA LINE FILTER; Maximum DC Resistance: .39 ohm; Terminal Finish: Gold (Au); Attenuation At Minimum Frequency: 9.1 dB; Attenuation At Maximum Frequency: 18 dB; Dimensions: L3.2XB1.6XH1.83 (mm)/L0.126XB0.063XH0.072 (inch);
1206USB-172MLB
DATA LINE FILTER; Maximum DC Resistance: .18 ohm; Rated Current: .7 A; Attenuation At Maximum Frequency: 26 dB; Inductance: .107 uH; Additional Features: GOLD OVER NICKEL OVER SILVER-PALLADIUM-GLASS FRIT TERMINATION;
1206USB-262MLB
DATA LINE FILTER; Maximum DC Resistance: .22 ohm; Rated Current: .6 A; No. of Functions: 2; No. of Terminals: 4; Attenuation At Minimum Frequency: 9.7 dB;
1206USB-262MLD
DATA LINE FILTER; Maximum DC Resistance: .22 ohm; Rated Current: .6 A; Length: 3.2 mm; No. of Functions: 2; Packing Method: TAPE AND REEL;
1206USB-371MLB
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: 1 A; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 3.2 mm;
1206USB-372MLB
DATA LINE FILTER; Maximum DC Resistance: .26 ohm; Rated Current: .6 A; Width (mm): 1.6; Inductance: .226 uH; Attenuation At Minimum Frequency: 12 dB;
1206USB-532MLC
Coilcraft's 1206USB-532MLC is a data line filter with 2 functions and 4 terminals. It offers attenuation up to 35 dB at 500 MHz, ideal for applications requiring noise suppression in data lines. With compact dimensions of L3.2xB1.6xH1.83 mm, it is suitable for surface mount installations in various electronic devices.
1206USB-672MLB
DATA LINE FILTER; Maximum DC Resistance: .34 ohm; Rated Current: .5 A; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Operating Temperature: -40 Cel; Height: 1.83 mm;
1206USB-672MLD
DATA LINE FILTER; Maximum DC Resistance: .34 ohm; Rated Current: .5 A; Packing Method: TAPE AND REEL; No. of Terminals: 4; Length: 3.2 mm;
1206USB-872MLB
DATA LINE FILTER; Maximum DC Resistance: .39 ohm; Rated Current: .5 A; Length: 3.2 mm; Inductance: .51 uH; Minimum Attenuation Frequency: 100 MHz;
1206USB-872MLD
DATA LINE FILTER; Maximum DC Resistance: .39 ohm; Rated Current: .5 A; Output Impedance (ohm): 870 OHM; Minimum Operating Temperature: -40 Cel; Height: 1.83 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved