Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0805USBF-902MRB by Coilcraft is a DATA LINE FILTER with 2 functions, inductance of 0.56 uH, and max operating temp of 125°C. Ideal for automotive applications due to AEC-Q200 screening level and surface mounting type.
Median Price
$0.820
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Coilcraft
1+ parts
100+ parts
-
1k+ parts
$0.350
10k+ parts
$0.280
VNN
Nova Conductors
Ampacity Inc.
$0.400
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Having 2 functions allows for better filtering and noise reduction in data lines, making this product suitable for applications requiring high levels of signal reliability.
The AEC-Q200 screening level ensures that this data line filter meets the rigorous automotive industry standards, making it a reliable choice for automotive applications.
Having 4 terminals allows for secure connection and stability, ensuring reliable data transmission and performance.
The data line filter type specifically targets and eliminates noise and interference in data lines, improving signal quality and data transmission.
With a high maximum operating temperature, this data line filter can withstand elevated temperatures, making it suitable for a wide range of operating environments.
The low minimum operating temperature allows this data line filter to function effectively in cold environments without compromising performance.
The terminal finish provides corrosion resistance and ensures long-term reliability in various environmental conditions.
The specified inductance value allows for effective filtering of unwanted frequencies in data lines, improving signal quality.
The compact width enables easy integration into circuit designs without occupying much space, making it suitable for space-constrained applications.
The low DC resistance minimizes signal loss and ensures efficient data transmission through the filter.
The precise length of the data line filter allows for accurate placement on the circuit board, optimizing signal filtering and transmission.
The TR plastic packing method provides protection during transportation and storage, ensuring the product arrives in optimal condition for installation.
The surface mounting type offers easy and secure installation on circuit boards, simplifying the manufacturing process.
The low profile height allows for compact and space-efficient design integration, making it suitable for applications with limited space.
Data Line Filters 0805USBF-902MRB attributes and parameters. Explore more Data Line Filters devices from Coilcraft
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Screening Level:
Terminal Finish:
Width (mm):
0805USBF-902MRB Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Product Change Notice (PDF)
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Panjit International
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Semicoa
1N4148WS
Diodes Incorporated
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
742792095
Wuerth Elektronik & Kg
Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.
BK1005HS102-T
Taiyo Yuden
BK1005HS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.0xB0.5xH0.5 (mm), this filter has a max DC resistance of 0.58 ohm and an output impedance of 1000 OHM, making it suitable for high-frequency filtering tasks in electronic circuits.
NVT4858HKZ
NXP Semiconductors
DATA LINE FILTER;
BLM15AG121SN1D
Murata Manufacturing
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
4206-001LF
Cts
4206-001LF by Cts is a Data Line Filter with 10000 Mohm Min Insulation Resistance, 500 V Rated Voltage, and 70 dB Max Insertion Loss. Ideal for applications requiring noise suppression in data lines, it has a capacitance of 3000 uF and can handle up to 25 A current at temperatures up to 125 °C.
744233670
Wurth Elektronik 744233670 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has approval from IEC and is used for filtering data lines in electronic applications.
FL75L05A
Delta Electronics
FL75L05A by Delta Electronics is a UL, CUL, IEC, VDE approved data line filter with 75V rated voltage. Featuring 9 terminals and 28 dB max insertion loss, it operates b/w -40 to 120 °C. Ideal for applications requiring a 50 OHM output impedance and a rated current of 5A.
BK1005HS102-TV
Taiyo Yuden's BK1005HS102-TV is a FERRITE CHIP filter with 2 terminals, rated at 0.3A current. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 1000Ω. Ideal for data line filtering applications with operating temperatures ranging from -55°C to 125°C.
P0353NLT
Pulse Electronics
Pulse Electronics P0353NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 590uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.021 ohm, and rated current of 5.6A. Ideal for surface mount applications requiring effective filtering in compact spaces.
NFM18CC102R1C3D
Murata Manufacturing's NFM18CC102R1C3D is a data line filter with 1000uF capacitance, 16V rated voltage, and 0.6A rated current. It features FEED THROUGH CAPACITOR type for noise suppression in electronic circuits. Ideal for applications requiring high insulation resistance and operating temperatures from -55 to 125°C.
NFM21PC475B1A3D
Murata Manufacturing's NFM21PC475B1A3D is a data line filter with 100 Mohm insulation resistance, 10V rated voltage, and 4700000 uF capacitance. It is ideal for applications requiring noise suppression in electronic circuits.
742792022
Wurth Elektronik 742792022 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max operating temperature of 125 °C and output impedance of 220 OHM at a frequency range from 100 MHz to 300 MHz. Ideal for surface mounting type, it offers low DC resistance (0.05 ohm) and rated current of 2 A in TAPE AND REEL packing method.
FBMH3225HM601NTV
Taiyo Yuden's FBMH3225HM601NTV is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40 to 125°C, has dimensions of L3.2xB2.5xH2.5 mm, and is ideal for surface mount applications in electronic devices requiring noise suppression.
MPZ1608S121ATAH0
TDK
The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.
MMZ2012Y102BTD25
The TDK MMZ2012Y102BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has a max operating temp of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive applications requiring a rated current of 0.5A and output impedance of 1000Ω.
BLM21SP601SH1D
Murata Manufacturing's BLM21SP601SH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. With max temp of 125°C and min of -55°C, it has DC resistance of 0.06 ohm. Ideal for data line filtering applications due to its 600 OHM output impedance and rated current of 1.5A.
HI1206T500R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
BK2125HM601-T
BK2125HM601-T by Taiyo Yuden is a chip bead data line filter with 500V rated voltage and 600 Ohm output impedance. With dimensions of L2.0XB1.25XH0.85 (mm), it operates b/w -55 to 125 °C, making it ideal for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequencies.
FBMH2012HM221-T
Taiyo Yuden's FBMH2012HM221-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C, it offers a DC resistance of 0.06 ohm and output impedance of 220 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and supports up to 100 MHz frequency range.
CM2021Y330R-10
Laird Technologies
CM2021Y330R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0008 ohm and an output impedance of 33 ohm. This surface mount filter is suitable for applications requiring a rated current of 15 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0805USBF-901MRB
0805USBF-901MRB by Coilcraft is a data line filter with 2 functions. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter is commonly used in automotive applications due to its AEC-Q200 screening level.
0805USB-901MLC
0805USB-901MLC by Coilcraft is a data line filter with 2 functions and 4 terminals. It offers attenuation of 16.9 dB at 500 MHz, ideal for applications requiring noise suppression in high-speed data transmission systems. With dimensions of L2.03XB1.27XH1.65 mm, it is suitable for surface mount installation in compact electronic devices.
0805USB-902MLC
DATA LINE FILTER; Maximum DC Resistance: .65 ohm; Rated Current: .4 A; JESD-609 Code: e4; Length: 2.03 mm; Attenuation At Minimum Frequency: 18.7 dB;
0805USB-902MLB
DATA LINE FILTER; Maximum DC Resistance: .65 ohm; Rated Current: .4 A; Minimum Attenuation Frequency: 100 MHz; Additional Features: GOLD OVER NICKEL OVER SILVER-PALLADIUM-GLASS FRIT TERMINATION; Case Code: 0805;
0805USBF-901MRC
0805USBF-901MRC by Coilcraft is a DATA LINE FILTER with 2 functions, inductance of 0.06 uH, and max operating temp of 125°C. Ideal for automotive applications due to AEC-Q200 screening level, it has 4 terminals and matte tin finish.
0805J1000102MXTE01
Knowles Precision Devices
FEED THROUGH CAPACITOR; Rated Current: .3 A; Capacitance: 1000 uF; JESD-609 Code: e3; Additional Features: C-TYPE FILTER; Terminal Finish: MATTE TIN OVER NICKEL;
0805USB-901MLB
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Dimensions: L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch); Attenuation At Minimum Frequency: 4.2 dB; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
0805USB-372MLC
DATA LINE FILTER; Maximum DC Resistance: .32 ohm; Rated Current: .5 A; Maximum Operating Temperature: 85 Cel; Dimensions: L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch); JESD-609 Code: e4;
0805USB-262MLC
DATA LINE FILTER; Maximum DC Resistance: .26 ohm; Rated Current: .5 A; No. of Functions: 2; No. of Terminals: 4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
0805USB-262MLB
DATA LINE FILTER; Maximum DC Resistance: .26 ohm; Rated Current: .5 A; Attenuation At Minimum Frequency: 8.6 dB; Dimensions: L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch); Output Impedance (ohm): 260 OHM;
0805USB-421MLB
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: .5 A; Length: 2.03 mm; Inductance: .023 uH; Dimensions: L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch);
0805USB-672MLC
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .5 A; Attenuation At Minimum Frequency: 16.6 dB; Width (mm): 1.27; Height: 1.65 mm;
0805USBF-262MRC
DATA LINE FILTER; Maximum DC Resistance: .235 ohm; Maximum Operating Temperature: 125 Cel; Inductance: .165 uH; Additional Features: AEC-Q200; Length: 2.03 mm;
0805USBF-502MRC
DATA LINE FILTER; Maximum DC Resistance: .32 ohm; Packing Method: TR, Plastic, 7 Inch; No. of Terminals: 4; Length: 2.03 mm; No. of Functions: 2;
0805USBF-902MRC
DATA LINE FILTER; Maximum DC Resistance: .63 ohm; Height: 1.4 mm; Width (mm): 1.27; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Mounting Type: SURFACE MOUNT;
0805USBF-262MRB
DATA LINE FILTER; Maximum DC Resistance: .235 ohm; Additional Features: AEC-Q200; Height: 1.4 mm; Length: 2.03 mm; Screening Level: AEC-Q200;
0805USBF-262MRD
DATA LINE FILTER; Maximum DC Resistance: .235 ohm; Inductance: .165 uH; Mounting Type: SURFACE MOUNT; Height: 1.4 mm; Screening Level: AEC-Q200;
0805USBF-372MRD
DATA LINE FILTER; Maximum DC Resistance: .27 ohm; No. of Functions: 2; Mounting Type: SURFACE MOUNT; Packing Method: TR, PLASTIC; Minimum Operating Temperature: -40 Cel;
0805USBF-901MRD
DATA LINE FILTER; Maximum DC Resistance: .14 ohm; No. of Functions: 2; Additional Features: AEC-Q200; JESD-609 Code: e3; No. of Terminals: 4;
0805USBF-902MRD
DATA LINE FILTER; Maximum DC Resistance: .63 ohm; Maximum Operating Temperature: 125 Cel; Height: 1.4 mm; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Inductance: .56 uH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved