Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE BEAD; Maximum DC Resistance: .84 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Inductance: 1 uH; Output Impedance (ohm): 665.8 OHM;
Median Price
$1.148
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Element14
1+ parts
-
100+ parts
$1.730
1k+ parts
$1.080
10k+ parts
$0.980
Farnell
$0.567
$0.445
$0.402
Data Line Filters 0603AF-152XJEU attributes and parameters. Explore more Data Line Filters devices from Coilcraft
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Terminal Finish:
Width (mm):
0603AF-152XJEU Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FLT007A0-SRZ
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Approvals (V): UL; CSA; VDE; Packing Method: BAG; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
FCFBMH4532HM681-T
Taiyo Yuden
Taiyo Yuden's FCFBMH4532HM681-T is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 680 ohm and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
BLM18PG121SN1
Murata Manufacturing
Murata Manufacturing's BLM18PG121SN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 2A rated current, and -55 to 125 °C operating temperature range. It is designed for surface mount applications requiring effective filtering in compact spaces.
BMB2A0300LN2
TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.
NFM18PS105R0J3D
Murata Manufacturing's NFM18PS105R0J3D is a data line filter with 6.3V rated voltage, 1000000uF capacitance, and 2A rated current. It features a feed through capacitor design and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring high insulation resistance.
BLM15AX100SN1D
BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.
DLM11GN601SD2D
Murata's DLM11GN601SD2D is a data line filter with 2 functions, rated at 5V and 0.1A. It offers high insulation resistance of 100 Mohm, operates b/w -40°C to 85°C, and has an output impedance of 600 ohms. Ideal for surface mount applications in electronic devices requiring noise filtering.
7448229004
Wuerth Elektronik & Kg
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
ACT45B-510-2P-TL
TDK
TDK's ACT45B-510-2P-TL is a 2-function data line filter with 10 Mohm insulation resistance, 51 uH inductance, and -40 to 150 °C operating temperature range. Ideal for AEC-Q200 applications requiring a rated voltage of 50 V and 0.2 A current.
ACM7060-701-2PL-TL01
TDK's ACM7060-701-2PL-TL01 is a data line filter with 2 functions, rated at 80V and 4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L7.0xB6.0xH3.5 mm. Ideal for applications requiring noise suppression in data lines.
MMZ1608S102ATA00
The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
ILHB0603ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
BK2125HM102-T
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
742863160
Wurth Elektronik 742863160 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.5A. It has a max operating temperature of 125°C and min of -55°C. Ideal for IEC-approved applications requiring output impedance of 600Ω in a compact size of L1.6xB0.8xH0.8mm.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
NVT4858HKZ
NXP Semiconductors
DATA LINE FILTER;
2508056017Y2
Fair-rite Products
Fair-rite Products' 2508056017Y2 is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L2.0XB0.9XH1.25 (mm), it offers a max frequency of 1000 MHz and DC resistance of 0.1 ohm, suitable for surface mount applications in filtering frequencies from 100 MHz to reduce interference.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
ACT45B-510-2P
ACT45B-510-2P by TDK is a data line filter with a rated voltage of 50V and a max operating temperature of 150°C. It has a min insulation resistance of 10 Mohm and is suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Coilcraft
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved