Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2-1 by Cobham Plc is a RF/Microwave Attenuator with max input power of 40 dBm, VSWR of 1.35, and nominal attenuation of 1 dB. Constructed coaxially, it operates b/w -55°C to 125°C and covers frequencies from 0 MHz to 18 GHz. Ideal for fixed attenuator applications in various RF and microwave systems.
Median Price
$519.255
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
RFMW
1+ parts
$184.340
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$454.050
RS (Exports)
$584.460
Newark
$601.990
TEDSS.com
$25.000
Allen Electronics Distributors
$84.460
Bastille Electronics
$99.000
$94.050
$88.110
Argo Parts USA
High power handling capability makes it suitable for a wide range of applications.
Low VSWR ensures efficient transmission and reception of RF signals.
Provides precise control over signal attenuation for optimal performance.
Coaxial construction allows for reliable and durable operation in various environments.
High operating temperature range ensures reliability in challenging conditions.
Low operating temperature allows for use in extreme cold environments.
Designed specifically for fixed attenuation requirements in RF and microwave systems.
Matched impedance ensures efficient power transfer with minimal signal loss.
Broad frequency range allows for versatile use in various RF applications.
High frequency range makes it suitable for demanding RF and microwave systems.
RF/Microwave Attenuators 2-1 attributes and parameters. Explore more RF/Microwave Attenuators devices from Cobham Plc
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
The Cobham Group comprises a number of dynamic businesses in diverse specialist areas, each of which are experts in their field. Together we are a leading global technology and services innovator, highly regarded and respected for providing solutions to the most complex problems in some of the most challenging environments and missions. From the depths of the ocean to deep space and everywhere in between, our customers mission is our mission and every mission matters. Engineers critical, cutting edge data solutions for the most challenging missions on land, sea, and in air and space; with customised solutions across the entire signal chain, including RF, microwave and high reliability microelectronics.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
TS9502T3
Smiths Group Plc
TS9502T3 by Smiths Group Plc is a RF/Microwave Attenuator with 20 dBm CW power, 1.5 VSWR, and 2 dB attenuation. Ideal for fixed attenuator applications in the frequency range of 0-18000 MHz.
23-1-3
Cobham Plc
23-1-3 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 50 ohm impedance. It has a max input power of 43.01 dBm and VSWR of 1.35, suitable for RF/Microwave applications up to 18 GHz with operating temperatures from -55°C to 125°C.
90-30-22
The Cobham Plc 90-30-22 is a fixed attenuator with 30 dB nominal attenuation, handling up to 46.99 dBm CW power and supporting frequencies from 0-18000 MHz. Ideal for RF applications, it boasts a low VSWR of 1.3 and operates in temperatures ranging from -55 to 125°C.
87-7.5
87-7.5 by Cobham Plc is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.25, and attenuation of 7.5 dB. Constructed coaxially, it operates b/w -55 to 100°C and has gold terminal finish. Ideal for fixed attenuator applications in the frequency range of 0-32000 MHz at 50 ohm impedance.
47-40-34
Api Technologies
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 125 Cel; Construction: COAXIAL; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
1-1
1-1 by Cobham Plc is a fixed attenuator with 1 dB nominal attenuation, 40 dBm CW input power, and 1.25 max VSWR. Constructed coaxially, it operates b/w -55°C to 125°C and covers frequencies from 0 MHz to 12400 MHz. Ideal for RF applications requiring precise signal control.
56-10
56-10 by Cobham Plc is a RF/Microwave Attenuator with 10 dB attenuation, 1.25 max VSWR, and 33.01 dBm CW power handling. Ideal for fixed attenuator applications in the frequency range of 0-28000 MHz, featuring a coaxial construction with gold terminal finish and 50 ohm impedance.
HMC273AMS10GE
Analog Devices
Analog Devices' HMC273AMS10GE is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 3.5 dB Max Insertion Loss, and 26.02 dBm Max Input Power. It operates b/w 700 MHz to 3800 MHz, making it ideal for signal attenuation in high-frequency applications like wireless communication systems.
RFSA3513SR
Qorvo
Qorvo's RFSA3513SR is a 31 dB variable attenuator with max input power of 30 dBm. Operating from -40 to 105°C, it covers frequencies from 5 MHz to 6 GHz. Ideal for RF applications needing precise signal control in surface mount setups.
HMC802LP3E
HMC802LP3E by Analog Devices is a GAAS technology RF attenuator with 20 dB attenuation and 4.5 dB insertion loss. It operates from 0 to 10000 MHz, handles up to 30 dBm CW power, and has a matte tin finish. Ideal for RF/microwave applications requiring precise signal control in a compact surface-mount package.
87-5
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Operating Temperature: 100 Cel; Terminal Finish: Gold (Au); Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 33.01 dBm; Additional Features: 2.92 MM-F; 2.92 MM-M, I/P POWER-MAX(PEAK)=500W;
32-13
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 13 dB;
19-9-1
19-9-1 by Cobham Plc is a fixed attenuator with 9 dB nominal attenuation, suitable for RF/Microwave applications. With a max input power of 30 dBm and VSWR of 1.35, it operates in the frequency range of 0-18000 MHz. Constructed coaxially, it can withstand temperatures from -55 to 125°C.
6A-10
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=250W; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
AA103-72LF
Skyworks Solutions
AA103-72LF by Skyworks Solutions is a RF/Microwave Attenuator with 10 dB Nominal Attenuation, 1.4 Max VSWR, and 0.7 dB Max Insertion Loss. It operates b/w 10 MHz to 2500 MHz, suitable for variable attenuation in RF systems. With a max input power of 30 dBm, it is ideal for applications requiring precise signal control.
HMC1019LP4E
Analog Devices' HMC1019LP4E is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in RF/microwave applications up to 30 GHz.
151-70
The Cobham Plc 151-70 is a COAXIAL VARIABLE ATTENUATOR with 70 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.35 Max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-4000 MHz, it offers precise signal control in various systems. Operating temperatures range from -20°C to 75°C.
44-07
44-07 by Cobham Plc is a COAXIAL fixed attenuator with 7 dB nominal attenuation, suitable for RF/Microwave applications. It can handle up to 36.99 dBm CW input power and has a max VSWR of 1.25, operating b/w -50°C to 85°C over a frequency range of 0-18000 MHz.
HMC1019ALP4E
HMC1019ALP4E by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It operates from -40 to 85 °C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in RF/microwave applications up to 30 GHz.
32-8.5
FIXED ATTENUATOR; Maximum Input Power (CW): 33.01 dBm; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2-10
FIXED ATTENUATOR; Construction: COAXIAL; JESD-609 Code: e4; Maximum Input Power (CW): 36.99 dBm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Terminal Finish: GOLD;
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.35; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Minimum Operating Temperature: -55 Cel;
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.35; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm;
2-1
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Temperature: 125 Cel; Terminal Finish: GOLD; Maximum Input Power (CW): 40 dBm; Maximum Operating Frequency: 18000 MHz;
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm; Terminal Finish: GOLD; Maximum Voltage Standing Wave Ratio: 1.35; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved