Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Cobham Plc 151-70 is a COAXIAL VARIABLE ATTENUATOR with 70 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.35 Max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-4000 MHz, it offers precise signal control in various systems. Operating temperatures range from -20°C to 75°C.
Median Price
$117.465
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
NAC Semi
1+ parts
$37.340
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$197.590
VNN
Vyrian
Electronic Expediters
AZTECH Wire
$6.105
Continental Prestige Electronics
$193.638
Netroflash
Argo Parts USA
High input power handling capability allows for reliable operation even in high power applications.
Low VSWR ensures minimal signal reflection and maximum power transfer efficiency.
High attenuation level provides excellent signal control and ensures precise adjustment of signal strength.
Coaxial construction offers good shielding and reduces electromagnetic interference, ensuring signal integrity.
Wide operating temperature range allows for usage in various environmental conditions without compromising performance.
Low minimum operating temperature ensures reliable operation even in cold environments.
Low insertion loss minimizes signal loss and maintains signal quality throughout the transmission.
Variable attenuator allows for flexible adjustment of signal strength, making it suitable for diverse applications.
Standard 50 ohm impedance ensures compatibility with most RF and microwave devices for seamless integration.
Wide frequency range starting from 0 MHz enables compatibility with various signal sources.
High maximum operating frequency allows for usage in a wide range of RF and microwave applications.
RF/Microwave Attenuators 151-70 attributes and parameters. Explore more RF/Microwave Attenuators devices from Cobham Plc
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
The Cobham Group comprises a number of dynamic businesses in diverse specialist areas, each of which are experts in their field. Together we are a leading global technology and services innovator, highly regarded and respected for providing solutions to the most complex problems in some of the most challenging environments and missions. From the depths of the ocean to deep space and everywhere in between, our customers mission is our mission and every mission matters. Engineers critical, cutting edge data solutions for the most challenging missions on land, sea, and in air and space; with customised solutions across the entire signal chain, including RF, microwave and high reliability microelectronics.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
EU2B-YS303C
Idec
ROTARY SWITCH;
Gulf Semiconductor
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Surge Components
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
58-06-32
Api Technologies
FIXED ATTENUATOR;
ADRF5731BCCZN-R7
Analog Devices' ADRF5731BCCZN-R7 is a RF/Microwave Attenuator with 30 dB Nominal Attenuation, 3.5 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). It operates b/w -40 to 105°C, has a frequency range of 100 MHz to 40 GHz, and requires +-3.3V power supply. Ideal for variable attenuation in RF/microwave applications.
PAT0510S-C-0DB-T10
Susumu
Susumu's PAT0510S-C-0DB-T10 is a 50 ohm fixed attenuator with 0 dB nominal attenuation, handling up to 15.05 dBm CW power. With a VSWR of 1.3, it operates from -55°C to 125°C, making it ideal for RF/Microwave applications up to 10 GHz.
87-7.5
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 33.01 dBm; Additional Features: 2.92 MM-F; 2.92 MM-M, I/P POWER-MAX(PEAK)=500W; Construction: COAXIAL;
PCAT-20
Aeroflex/inmet
FIXED ATTENUATOR; Maximum Operating Temperature: 150 Cel; Nominal Attenuation: 20 dB; Maximum Operating Frequency: 12400 MHz; Maximum Input Power (CW): 31.76 dBm; Minimum Operating Temperature: -55 Cel;
4102-12
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD; Nominal Attenuation: 2 dB; Minimum Operating Temperature: -55 Cel;
3007-2
VARIABLE ATTENUATOR; Maximum Operating Temperature: 65 Cel; Nominal Attenuation: 2 dB; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
HMC624ACPSZ-EP-RL7
Analog Devices' HMC624ACPSZ-EP-RL7 is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 3.8 dB Max Insertion Loss, and 25 dBm Max Input Power (CW). It operates from -55 °C to 105°C, suitable for applications requiring variable attenuation in the frequency range of 100 MHz to 6 GHz.
HMC288MS8TR
VARIABLE ATTENUATOR;
MTVA0400N09S
Smiths Group Plc
The Smiths Group Plc MTVA0400N09S is a RF/Microwave Attenuator with 4 dB Nominal Attenuation, 23.01 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates in the frequency range of 0-12400 MHz, making it suitable for signal attenuation in various RF/microwave applications.
Cobham Plc
PCAT-20 by Cobham Plc is a fixed attenuator with 20 dB nominal attenuation, handling up to 31.76 dBm CW power. With a VSWR of 1.35, it operates from -55°C to 150°C and covers frequencies from 0 MHz to 12400 MHz, making it ideal for RF/Microwave applications.
66-10-34
66-10-34 by Cobham Plc is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.9, and attenuation of 10 dB. Ideal for applications requiring fixed attenuators in the frequency range of 0-18000 MHz, with characteristic impedance of 50 ohm.
MAATCC0005-TB
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 31.5 dB; JESD-609 Code: e3; Maximum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 33.98 dBm;
4205
FIXED ATTENUATOR; Additional Features: SMA-F; SMA-M; Maximum Operating Temperature: 150 Cel; Maximum Operating Frequency: 8000 MHz; JESD-609 Code: e4; Minimum Operating Frequency: 0 MHz;
F2258NLGK8
Integrated Device Technology
RF/Microwave Attenuators; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
M3933/25-36N
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Frequency: 18000 MHz; Additional Features: SMA; Construction: COAXIAL;
HMC939ALP4E
HMC939ALP4E by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 8 dB Max Insertion Loss. It operates from -40 to 85°C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in applications up to 33 GHz.
HMC468LP3
Analog Devices' HMC468LP3 is a RF/Microwave Attenuator with 30 dBm CW power, 7 dB attenuation, and 1.8 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-6000 MHz.
151-70
82-40-13
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Additional Features: 7/16-F; N-F, I/P POWER-MAX(PEAK)=10000W; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Nominal Attenuation: 40 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 75 Cel; Nominal Attenuation: 70 dB; Maximum Operating Frequency: 4000 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
Aeroflex Plainview
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Construction: COAXIAL; Maximum Operating Temperature: 75 Cel; Minimum Operating Frequency: 0 MHz;
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Additional Features: 3.5 MM-F, CMOS COMPATIBLE, I/P POWER-MAX(PEAK)=100W; Maximum Insertion Loss: .7 dB; Minimum Operating Temperature: -20 Cel; Minimum Operating Frequency: 0 MHz;
151-70-2
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Construction: COAXIAL; Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -20 Cel; Minimum Operating Frequency: 0 MHz;
151-70-3
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Input Power (CW): 30 dBm; Nominal Attenuation: 70 dB; Construction: COAXIAL; Minimum Operating Temperature: -20 Cel;
151-75-1
VARIABLE ATTENUATOR; Nominal Attenuation: 75 dB; Maximum Operating Temperature: 75 Cel; Additional Features: 3.5 MM-F, CMOS COMPATIBLE, I/P POWER-MAX(PEAK)=100W; Maximum Insertion Loss: .9 dB; Characteristic Impedance: 50 ohm;
151-75-3
VARIABLE ATTENUATOR; Maximum Operating Frequency: 4000 MHz; Maximum Voltage Standing Wave Ratio: 1.5; Construction: COAXIAL; Characteristic Impedance: 50 ohm; Nominal Attenuation: 75 dB;
151-75
VARIABLE ATTENUATOR; Maximum Operating Temperature: 75 Cel; Maximum Insertion Loss: .9 dB; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -20 Cel; Nominal Attenuation: 75 dB;
151-70-1
VARIABLE ATTENUATOR; Maximum Insertion Loss: .7 dB; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.35; Nominal Attenuation: 70 dB; Maximum Operating Temperature: 75 Cel;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 4000 MHz; Maximum Operating Temperature: 75 Cel; Characteristic Impedance: 50 ohm; Nominal Attenuation: 70 dB; Maximum Input Power (CW): 30 dBm;
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 75 dB; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 75 Cel; Maximum Insertion Loss: .9 dB;
VARIABLE ATTENUATOR; Maximum Insertion Loss: .7 dB; Minimum Operating Temperature: -20 Cel; Nominal Attenuation: 70 dB; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Frequency: 0 MHz;
VARIABLE ATTENUATOR; Maximum Input Power (CW): 30 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 75 Cel; Nominal Attenuation: 70 dB; Characteristic Impedance: 50 ohm;
151-75-2
VARIABLE ATTENUATOR; Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -20 Cel; Construction: COAXIAL; Nominal Attenuation: 75 dB; Maximum Operating Frequency: 4000 MHz;
VARIABLE ATTENUATOR; Minimum Operating Temperature: -20 Cel; Nominal Attenuation: 75 dB; Maximum Operating Temperature: 75 Cel; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): 30 dBm;
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: .7 dB; Construction: COMPONENT; Minimum Operating Temperature: -20 Cel; Minimum Operating Frequency: 0 MHz;
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: .7 dB; Construction: COMPONENT; Maximum Operating Frequency: 4000 MHz; Nominal Attenuation: 70 dB;
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 30 dBm; Maximum Insertion Loss: .9 dB; Minimum Operating Temperature: -20 Cel; Maximum Operating Frequency: 4000 MHz;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 4000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Insertion Loss: .9 dB; Construction: COMPONENT; Minimum Operating Temperature: -20 Cel;
VARIABLE ATTENUATOR; Maximum Insertion Loss: .9 dB; Maximum Input Power (CW): 30 dBm; Nominal Attenuation: 75 dB; Minimum Operating Temperature: -20 Cel; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved