Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Termination Type: SOLDER; Center Contact Material: PHOSPHOR BRONZE; Body Length/Diameter: 6 mm;
Median Price
$0.181
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.177
Keypad Switches CS11028.5F100J attributes and parameters. Explore more Keypad Switches devices from Cit Relay & Switch
Material (Actuator):
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Material:
Center Contact Plating:
Circuit Config:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
End Contact Plating:
Housing Material:
Insulation Resistance:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Terminal Material:
Termination Type:
CS11028.5F100J Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
CIT Relay & Switch, located in greater Minneapolis, MN, is a designer and manufacturer of quality Electromechanical Relays, Solid State Relays and Electromechanical Switches. CIT’s full line of products is supported by manufacturer's reps and distributors throughout North America and shipped to OEMs and CMs worldwide. CIT acquired Picker Components in 2020 and moved into a new and bigger corporate warehouse facility in 2022. The company’s focus on customer service and quality, combined with cost-effective manufacturing make CIT the favorite choice for all designs and any required custom solution.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vicor
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1554216002
Molex
WIRE AND CABLE;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Leshan Radio
MX1A-E1NW
Zf Friedrichshafen Ag
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): KEYLOCK; Contact Function: OFF-(ON); Solderability: WAVE;
FSM2JART
TE Connectivity
TE Connectivity's FSM2JART is a RED KEYPAD SWITCH with SPST function. It offers 100000 cycles electrical life, 1.568N max operating force, and -40 to 105°C temp range. Ideal for PANEL MOUNT applications requiring momentary-tactile switch action in various industries.
KSC351JLFS
C & K Components
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): HARD TYPE; Solderability: REFLOW; Electrical Life: 100000 Cycle(s);
DTS-61R-V
Diptronics Manufacturing
DTS-61R-V by Diptronics is a red SPST keypad switch with 100000 cycles electrical life. Featuring 0.25mm actuator travel, it operates b/w -25 to 70°C. Ideal for applications requiring momentary-tactile switch action and through-hole-straight mounting, with a max DC contact voltage of 12V.
MX1A-11NN
The Cherry
KEYPAD SWITCH;
434153017835
Wuerth Elektronik & Kg
434153017835 Keypad Switch by Wurth Elektronik features SPST switch function, stainless steel housing, and blue actuator color. With a max operating force of 3.92N, it is ideal for applications requiring momentary switch action in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.
SKHUALE010
Alps Alpine
Alps Alpine SKHUALE010 is a black keypad switch with SPST function. It has an electrical life of 300K cycles, insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for applications requiring momentary-tactile switch action in surface mount configurations.
KSS341GLFS
Itt Cannon
ITT Cannon's KSS341GLFS is a SPST keypad switch with 1VA@32VDC power rating. Featuring IP40 sealing, it has 4N max operating force and -40 to 85°C temp range. Ideal for surface mount-right angle applications, this tactile switch offers 3ms contact bounce time.
EVQPJJ04T
Panasonic
The Panasonic EVQPJJ04T is a SPST keypad switch with 30000 cycles electrical life, 3N max operating force, and 10ms contact bounce time. Ideal for applications requiring momentary switch action, such as control panels or industrial equipment.
EVQP2202W
The Panasonic EVQP2202W is a SPST keypad switch with 1000000 cycle electrical life and 100000000 ohm insulation resistance. With a max operating force of 1.6N, it's ideal for applications requiring ON-OFF contact function in temperatures ranging from -40 to 85°C.
KSC221GLFS
KSC221GLFS by ITT Cannon is a SPST keypad switch with IP67 sealing. It has a max DC power rating of 1VA@32VDC and insulation resistance of 1000000000 ohm. Ideal for applications requiring a soft type actuator, such as consumer electronics or industrial control panels.
MCSLPT4848A5DTR
TE Connectivity's MCSLPT4848A5DTR is a SPST Keypad Switch with 200000 cycles Electrical Life. It features POLYETHYLENE Housing, COPPER ALLOY Terminals, and STAINLESS STEEL End Contacts. Ideal for PANEL MOUNT applications, it has an Operating Temperature range of -30 to 80 °C and supports DC Current up to 0.05 A at 12V.
KSR223GNCLFG
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): SOFT TYPE; Solderability: REFLOW; No. of Switches: 1;
ADTSM31RVT/R
Apem Components
ADTSM31RVT/R by Apem Components is a red keypad switch with SPST function. It has an electrical life of 30,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring momentary-tactile switch action in temperatures ranging from -25°C to 70°C.
DTSM-63N-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Maximum Operating Force: 2.06 N; Maximum DC Contact Voltage: 12 V;
MJTP1236E
MJTP1236E by Apem Components is a black keypad switch with stainless steel housing. It has an electrical life of 100,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a momentary-tactile switch with through hole-right angle mounting feature.
4FTH922
The Apem Components 4FTH922 keypad switch has an electrical life of 10M cycles, GREEN LED illumination, and IP67 sealing. Ideal for applications requiring a SPST switch with a max DC contact voltage of 24V, such as industrial control panels or outdoor electronic devices.
KSL0M412LFT
KSL0M412LFT by C & K Components is a SPST keypad switch with IP65 sealing, suitable for applications requiring durability. It has an electrical life of 100000 cycles and a max DC contact voltage of 32V, making it ideal for use in harsh environments. With a compact body width of 6.2mm and solder termination, this switch offers reliable performance in various electronic devices.
1.14.100.501/0000
Rafi & Kg
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Maximum DC Contact Voltage: 35 V; Termination Type: SOLDER; No. of Switches: 1;
EVQPF204R
The Panasonic EVQPF204R is a SPST keypad switch with 100000 cycles electrical life, 7.4mm height, and 2.1N max operating force. Ideal for applications requiring momentary switch action, such as control panels or industrial equipment. Operating temperature range from -20°C to 70°C ensures reliability in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cit Relay & Switch
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved