Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CS11028.0F160J by Cit Relay & Switch is a SPST Keypad Switch with SILVER plating, suitable for applications requiring 100000 cycles of Electrical Life. It features NYLON housing, BRASS terminals, and PHOSPHOR BRONZE contacts, offering an operating force of 1.57N and max DC contact voltage of 50V. Ideal for surface mount applications in various electronic devices.
Median Price
$0.480
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.344
1k+ parts
$0.319
10k+ parts
-
Nova Conductors
$0.258
Vyrian
Argo Parts USA
$0.250
Continental Prestige Electronics
$0.252
Netroflash
$0.245
$0.240
Component Stockers USA
$0.420
$0.330
Aztec Data Supply Inc.
$1.022
Nylon is a durable and lightweight material, making the keypad switches sturdy and easy to handle.
Brass terminals offer good conductivity and corrosion resistance, ensuring reliable electrical connections.
With a high electrical life cycle, these keypad switches are long-lasting and can withstand frequent use.
High insulation resistance helps prevent electrical leakage and ensures safety in operation.
The wide body width provides ample space for the keypad layout, making it user-friendly and easy to operate.
Single Pole Single Throw (SPST) configuration offers a simple ON/OFF functionality, suitable for many applications.
Silver plating on end contacts ensures low contact resistance and reliable switching performance.
High maximum operating temperature allows the keypad switches to function in a wide range of environments.
Low minimum operating temperature ensures that the keypad switches can still operate in cold conditions.
With a short actuator travel distance, these switches provide precise tactile feedback for the user.
Phosphor bronze end contacts offer good conductivity and durability, enhancing the reliability of the switches.
With a maximum DC contact voltage of 50V, these switches are suitable for low voltage applications.
Keypad switches are specifically designed for use in keypads, offering a compact and efficient solution for input control.
Silver plating on center contacts ensures consistent and low-resistance connections.
High dielectric voltage withstand capability ensures safety and reliability in electrical insulation.
1X1 circuit configuration simplifies the wiring and connection setup, making installation easier.
Tape and reel packaging allows for easy handling and automated assembly, improving efficiency in production.
Compact body length/diameter makes the switches space-saving and suitable for small electronic devices.
Low operating force requirement makes the switches easy to press, reducing user fatigue during prolonged use.
The maximum DC rating for resistive load ensures compatibility with various electronic devices and circuits.
Phosphor bronze center contacts provide reliable electrical conductivity and long-term durability.
With a maximum DC contact current rating of 0.05A, these switches can handle low current loads safely.
Momentary tactile switch action provides tactile feedback to the user, confirming activation and enhancing user experience.
Solder termination offers a reliable and secure connection for the switches, ensuring stable performance over time.
Low contact resistance ensures efficient electrical conductivity and minimal power loss during switching.
Surface mount straight mounting feature allows for easy and secure installation on PCBs or electronic devices.
Nylon actuator material offers durability and precision in operation, ensuring smooth and reliable key presses.
Keypad Switches CS11028.0F160J attributes and parameters. Explore more Keypad Switches devices from Cit Relay & Switch
Material (Actuator):
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Material:
Center Contact Plating:
Circuit Config:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
End Contact Plating:
Housing Material:
Insulation Resistance:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Terminal Material:
Termination Type:
CS11028.0F160J Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
CIT Relay & Switch, located in greater Minneapolis, MN, is a designer and manufacturer of quality Electromechanical Relays, Solid State Relays and Electromechanical Switches. CIT’s full line of products is supported by manufacturer's reps and distributors throughout North America and shipped to OEMs and CMs worldwide. CIT acquired Picker Components in 2020 and moved into a new and bigger corporate warehouse facility in 2022. The company’s focus on customer service and quality, combined with cost-effective manufacturing make CIT the favorite choice for all designs and any required custom solution.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Multicomp Pro
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Lite-on Semiconductor
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
PTS645SK432LFS
C & K Components
PTS645SK432LFS by C & K Components is a SPST keypad switch with a 100000 cycle electrical life and 100000000000 ohm insulation resistance. It is commonly used in applications requiring momentary-tactile switch action, such as consumer electronics or industrial control systems.
FSM16JH
TE Connectivity
TE Connectivity's FSM16JH is a black keypad switch with nylon housing. It offers SPST switch function, 100000 cycles electrical life, and 1.568N max operating force. Ideal for panel mount applications in various industries due to its -35 to 85°C temp range and 0.05A@24VDC DC rating.
1571563-4
TE Connectivity 1571563-4 Keypad Switch features SPST switch function, 100000 cycles electrical life, and 2.548N max operating force. Ideal for panel mount applications with -35 to 85°C temp range and 0.05A@24VDC DC rating.
EVQP7J01P
Panasonic
The Panasonic EVQP7J01P is a SPST keypad switch with 100000 cycle electrical life and 100000000 ohm insulation resistance. With a max operating force of 1.6N, it is ideal for applications requiring momentary switch action such as consumer electronics and industrial control systems.
MJTP1236E
Apem Components
MJTP1236E by Apem Components is a black keypad switch with stainless steel housing. It has an electrical life of 100,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a momentary-tactile switch with through hole-right angle mounting feature.
4FSH922
The Apem Components 4FSH922 keypad switch features a green LED illumination, SPST switch function, and IP67 sealing. With an electrical life of 10M cycles, it is ideal for applications requiring a momentary switch action in environments with temperatures ranging from -40°C to 160°C.
1825955-2
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; DC Maximum Rating R Load (Contact): .05A@24VDC; Manufacturer Series: 1825955; Electrical Life: 100000 Cycle(s);
B32-1600
Omron
Omron B32-1600 Keypad Switch features SPST switch function, 70°C max operating temp, -25°C min operating temp. Ideal for through-hole mounting applications requiring momentary-tactile switch action.
FSMIJ61BG04
TE Connectivity's FSMIJ61BG04 Keypad Switch features SPST switch function, 0.2mm actuator travel, and 500000 electrical life cycles. Ideal for panel mounting applications, it has a thermoplastic housing, brass terminals, and green/yellow LED illumination.
MCSLPT4644B4TR
TE Connectivity's MCSLPT4644B4TR is a SPST Keypad Switch with POLYETHYLENE housing and COPPER ALLOY terminals. It offers 500000 cycles of Electrical Life, 100000000 ohm Insulation Resistance, and operates b/w -20 to 70 °C. Ideal for PANEL MOUNT applications, this switch has a max DC Contact Voltage of 12V and an Actuator Travel of 0.2mm.
EVQP2402W
The Panasonic EVQP2402W is a keypad switch with SPST function, 2.5mm actuator travel, and 500000 electrical life cycles. It operates b/w -40 to 85°C, has gold/silver terminal finish, and withstands up to 15V DC contact voltage. Ideal for applications requiring ON-OFF control in compact devices.
PTS636SM50LFS
PTS636SM50LFS by C & K Components is a black keypad switch with 50000 cycles electrical life. Featuring SPST switch function, it has an actuator travel of 0.3mm and operates b/w -40°C to 90°C. Ideal for applications requiring a momentary-tactile switch with through-hole mounting and solder termination.
JB-15FBP2
Nkk Switches
JB-15FBP2 by Nkk Switches is a SPST keypad switch with GLASS FILLED POLYAMIDE housing. It has 5000000 cycle electrical life and operates b/w -25 to 70 °C. Ideal for applications requiring a momentary-tactile switch with 24VDC max rating and 1.8N operating force.
KMS233GLFG
KMS233GLFG by C & K Components is a SPST keypad switch with 100000 cycles electrical life, 0.2VA@32VDC DC power rating, and 1000000000 ohm insulation resistance. It is ideal for applications requiring a momentary-tactile switch with gold contact materials, such as surface mount-right angle mounting in environments ranging from -40 to 125 °C.
RA3FTH9
The Apem Components RA3FTH9 is a 9.56" wide keypad switch with IP67 sealing, SPST function, and 160°C max operating temp. Ideal for applications requiring a moisture-proof, momentary action switch with 24VDC contact voltage and 3N operating force.
5GTH93501
5GTH93501 by Apem Components is a keypad switch with PPS housing, blue LED illumination, and IP67 sealing. It has an electrical life of 10M cycles and insulation resistance of 10M ohm. Ideal for applications requiring momentary switch action in environments with temperature range from -40 to 160°C.
B3F-1020
Omron B3F-1020 Keypad Switch offers SPST switch function with 1000000 cycles electrical life. With 1.27N max operating force, it's ideal for OFF-(ON) contact function in applications requiring momentary-tactile switch action. Featuring gold terminal finish and 500VAC dielectric withstand volts, it ensures reliable performance in various electronic devices.
FSMRA7J
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): ROUND/EXTENDED TYPE; Packing Method: BULK; Maximum Operating Force: 1.57 N;
KMR221GLFS
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Solderability: REFLOW; Maximum Operating Force: 2.5 N; Body Width: 2.8 inch;
1301.9315
Schurter Ag
The Schurter Ag 1301.9315 keypad switch features SPST switch function, brass terminals, and IP40 sealing. With a max operating force of 2.1N and electrical life of 100000 cycles, it is ideal for applications requiring momentary-tactile switch action in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CS11028.0F160
Cit Relay & Switch
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Insulation Resistance: 100000000 ohm; No. of Switches: 1; Packing Method: TAPE AND REEL;
CS11029.5F260J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Dielectric Withstand Volts (V): 250VRMS; Contact Resistance: 50 mohm; Maximum Operating Force: 2.55 N;
CS11028.5F100
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Terminal Material: BRASS; End Contact Material: PHOSPHOR BRONZE; Center Contact Plating: SILVER;
CS11024.3F160J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Plating: SILVER; Housing Material: NYLON; Center Contact Material: PHOSPHOR BRONZE;
CS11028.5F100J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Termination Type: SOLDER; Center Contact Material: PHOSPHOR BRONZE; Body Length/Diameter: 6 mm;
CS11028.0F100J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Dielectric Withstand Volts (V): 250VRMS; Material (Actuator): NYLON; Housing Material: NYLON;
CS11028.5F160J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum Operating Force: 1.57 N; Maximum DC Contact Current: .05 A; Center Contact Plating: SILVER;
CS11028.5F160
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Material: PHOSPHOR BRONZE; Terminal Material: BRASS; Body Height: 3.5 mm;
CS11028.0F260
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Material: PHOSPHOR BRONZE; Insulation Resistance: 100000000 ohm; Switch Action: MOMENTARY-TACTILE;
CS1102S2.8F160
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Material: PHOSPHOR BRONZE; Maximum DC Contact Voltage: 50 V; Body Length/Diameter: 6 mm;
CS1102S2.4F100
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Switch Action: MOMENTARY-TACTILE; Housing Material: NYLON; DC Maximum Rating R Load (Contact): 0.05A@50VDC;
CS1102S2.8F160J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Body Length/Diameter: 6 mm; Body Width: 6 inch; DC Maximum Rating R Load (Contact): 0.05A@50VDC;
CS1102S2.8F260JC01
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum Operating Force: 2.55 N; Contact Resistance: 50 mohm; Body Length/Diameter: 6 mm;
CS11028.0F260J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum DC Contact Current: .05 A; Body Width: 6 inch; Housing Material: NYLON;
CS11028.5F260
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Actuator Travel (mm): 0.25; Maximum DC Contact Current: .05 A; Maximum Operating Temperature: 85 Cel;
CS1102S2.8F260JC04
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Termination Type: SOLDER; Insulation Resistance: 100000000 ohm; Packing Method: TAPE AND REEL;
CS11028.5F260J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Plating: SILVER; DC Maximum Rating R Load (Contact): 0.05A@50VDC; Maximum DC Contact Voltage: 50 V;
CS1102S2.8F260JC05
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; End Contact Material: PHOSPHOR BRONZE; Switch Action: MOMENTARY-TACTILE; Insulation Resistance: 100000000 ohm;
CS11027.5F100J
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Material (Actuator): NYLON; Terminal Material: BRASS; Electrical Life: 100000 Cycle(s);
CS11028.0F100
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; DC Maximum Rating R Load (Contact): 0.05A@50VDC; Maximum DC Contact Voltage: 50 V; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved