Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Maximum Standby Current: .000002 Amp;
Median Price
$0.380
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$0.318
100+ parts
$0.278
1k+ parts
$0.258
10k+ parts
$0.207
Arrow
$0.333
$0.299
$0.225
Newark
$0.392
$0.347
$0.322
$0.309
DigiKey
$0.400
$0.354
$0.328
-
Mouser Electronics
$0.355
$0.329
$0.252
Element14
$0.507
$0.437
$0.419
$0.343
Adafruit Industries
$3.396
$3.090
$2.785
Chip1Stop
$0.306
$0.230
Avnet
$0.110
Rochester
$0.266
$0.221
$0.197
Verical
Digiode
Nova Conductors
$0.222
IBS Electronics
$0.175
NAC Semi
$0.214
Chip Stock
Vyrian
Flip Electronics
Component Sense
ComSIT Distribution GmbH
Bristol Electronics
Atlantic Semiconductor
South Electronics
Sensible Micro Corp
Prism Electronics
Semi Source
Ampacity Inc.
$0.129
Component Stockers USA
$0.180
$0.210
$0.200
$0.170
Corphita
$0.186
Corohmni
$0.215
Argo Parts USA
Netroflash
$0.218
Semicontronic
$0.271
$0.270
Microchip USA
$1.327
Aztec Data Supply Inc.
$2.931
Advanced Electronics
Perfect Parts
Kepictronics
Lixinc
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Continental Prestige Electronics
$0.196
$0.179
$0.171
A-Z Elektronik GmbH
Alle Elektronik GmbH
Robosynatics
$13.222
Lucentia Tech
UHIMA Technologies
Authorized Procurement Solutions
GreenTree Electronics
Futuretech Components
Bastille Electronics
EEPROM CAT24C16YI-GT3 attributes and parameters. Explore more EEPROM devices from Catalyst Semiconductor
Maximum Clock Frequency (fCLK):
Minimum Data Retention Time:
Endurance:
I2C Control Byte:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Serial Bus Type:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Maximum Write Cycle Time (tWC):
Write Protection:
CAT24C16YI-GT3 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
PCN Design/Specification - ID Page Feature 04/Mar/2016
PCN Assembly/Origin - Qualification ONC18EE 03/Apr/2014
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Surge Components
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
24LC01B-I/P
24LC01B-I/P by Microchip Technology is an EEPROM with 128x8 organization, operating at 5V. It features I2C control byte 1010XXXR and offers write protection. With a max clock frequency of 0.4 MHz, it is ideal for industrial applications requiring reliable non-volatile memory storage.
25LC1024-E/SM
25LC1024-E/SM by Microchip Tech is a 128KX8 EEPROM with 10 MHz clock frequency, SPI serial bus, and 1Mbit memory density. Ideal for automotive applications due to AEC-Q100 screening, -40 to 125 °C operating temp range, and 1000000 write/erase cycles endurance. Offers hardware/software write protection and synchronous operation.
CAT25128VI-GT3
Onsemi
CAT25128VI-GT3 by Onsemi is an 8-terminal EEPROM with 16KX8 organization, operating at a clock frequency of 5 MHz. It features hardware/software write protection and SPI serial bus type, suitable for industrial applications requiring a memory density of 131072 bit and endurance of 1000000 Write/Erase Cycles.
24LC64T-I/SN
24LC64T-I/SN by Microchip Technology is an EEPROM with 8KX8 organization, 8192 words, and 65536 bit memory density. It operates at a max clock frequency of 0.4 MHz in industrial temperature grade applications. Featuring I2C serial bus type, it offers 1000000 write/erase cycles endurance for reliable data storage.
AT25128B-SSHL-T
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Clock Frequency (fCLK): 5 MHz;
AT24MAC402-XHM-B
AT24MAC402-XHM-B by Microchip Technology is a 256x8 EEPROM with a max clock frequency of 1 MHz. It operates in synchronous mode and has a min supply voltage of 1.7V. This memory IC is commonly used in industrial applications for its high endurance of 1,000,000 write/erase cycles and I2C serial bus interface.
24LC128T-E/ST
24LC128T-E/ST by Microchip is an EEPROM with 16KX8 organization, 131072 bit memory density, and 1000000 Write/Erase Cycles endurance. Operating in the automotive temperature grade range of -40 to 125 °C, it features I2C serial bus type for applications requiring reliable non-volatile memory storage. With a compact form factor of 4.4mm x 3mm and low standby current of 0.000005A, it's ideal for space-constrained automotive electronics.
AT24C08C-SSHM-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
DS28EC20P+T
Maxim Integrated
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: SOC; Package Shape: RECTANGULAR; Qualification: Not Qualified;
DS2433S/T&R
DS2433S/T&R by Maxim Integrated is a 1-WIRE EEPROM with 4Kx1 organization, operating at 5V. It offers 50,000 write/erase cycles and operates in industrial temperature range (-40 to 85 °C). Ideal for applications requiring reliable non-volatile memory storage in compact designs.
M24M02-DRMN6TP
The STMicroelectronics M24M02-DRMN6TP is an EEPROM with 256KX8 organization, operating at 2.5V, and featuring I2C control byte 1010DMMR. It has a memory density of 2097152 bit, endurance of 1000000 cycles, and is ideal for industrial applications requiring reliable non-volatile memory storage.
24LC128T-I/SNG
24LC128T-I/SNG by Microchip Technology is an EEPROM with 16KX8 organization, operating at 4.5V, and featuring I2C control byte 1010DDDR. It has a memory density of 131072 bit and endurance of 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
24LC64-E/SN
24LC64-E/SN by Microchip Technology is an EEPROM with a memory density of 65536 bit. It operates in synchronous mode and has a max clock frequency of 0.4 MHz. This small outline package is commonly used in automotive applications for its durability and resistance to high temperatures.
CAT24C128WI-GT3
CAT24C128WI-GT3 by Onsemi is an 8-terminal EEPROM with 16Kx8 organization, operating at 1MHz clock frequency. It has a supply voltage range of 2.5V to 5.5V and offers hardware write protection. Ideal for industrial applications requiring reliable non-volatile memory storage with up to 1000000 write/erase cycles.
DS24B33Q+U
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
24AA04T-I/OT
24AA04T-I/OT by Microchip Technology is a 512x8 EEPROM with I2C serial bus, offering 1000000 write/erase cycles. Operating at -40 to 85 °C, it has a max clock frequency of 0.4 MHz and supports hardware write protection. Ideal for applications requiring low-profile memory solutions in automotive electronics.
24AA1025-I/SN
24AA1025-I/SN by Microchip Technology is an EEPROM with 128KX8 organization, 1048576 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates in industrial temperature grade, has a max clock frequency of 0.4 MHz, and uses I2C serial bus type. Ideal for applications requiring reliable non-volatile memory storage in harsh environments.
24LC64-I/STG
24LC64-I/STG by Microchip Technology is an 8KX8 EEPROM with a memory density of 65536 bit. It operates at 0.4 MHz clock frequency and has a max supply voltage of 5.5 V. Ideal for industrial applications requiring reliable data storage with up to 1000000 write/erase cycles.
25AA010AT-I/OT
Microchip Technology's 25AA010AT-I/OT is a 1024-bit EEPROM with SPI interface, operating at 5V. It offers 1000000 write/erase cycles, -40 to 85°C temperature range, and AEC-Q100 screening for industrial applications. The small outline package has a low profile of 1.45mm and supports synchronous operation up to 10MHz clock frequency.
24LC256T-I/SM
24LC256T-I/SM by Microchip Technology is a 32Kx8 EEPROM with I2C control byte 1010DDDR. It operates at 3.6V, has 1000000 write/erase cycles endurance, and supports up to 0.4 MHz clock frequency. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT24C256WI-GT3
Catalyst Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
CAT24C256WI-GT3 by Onsemi is an EEPROM with 32KX8 organization, operating at 5V. It features I2C control byte 1010DDDR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact small outline package.
CAT24M01WI-GT3
CAT24M01WI-GT3 by Onsemi is an EEPROM with 128KX8 organization, operating at 1 MHz clock frequency. It has a supply voltage range of 1.8V to 5.5V and offers 1000000 write/erase cycles endurance. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact small outline package style.
CAT24C512WI-GT3
CAT24C512WI-GT3 by Onsemi is an EEPROM with 64KX8 organization, operating at 5V. It offers 1000000 Write/Erase cycles endurance and operates on I2C serial bus. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
CAT24C64WI-GT3
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Words: 8192 words;
CAT24C64WI-GT3 by Onsemi is an 8KX8 EEPROM with 1MHz clock frequency, 1000000 write/erase cycles, and I2C serial bus. It operates at -40 to 85°C for industrial applications, featuring a small outline package with dual terminals. Ideal for hardware write protection in various electronic devices.
CAT25256VI-GT3
CAT25256VI-GT3 by Onsemi is a 32KX8 EEPROM with 262144 bit memory density. It operates at 5 MHz clock frequency, has 1000000 Write/Erase Cycles endurance, and uses SPI serial bus type. Ideal for industrial applications requiring reliable data storage in a compact package measuring 4.9mm x 3.9mm with a max seated height of 1.75 mm.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
CAT25512VI-GT3
CAT25512VI-GT3 by Onsemi is an 8-terminal EEPROM with 64KX8 organization, operating at 5 MHz clock frequency. It offers hardware/software write protection and SPI serial bus type for industrial applications. With a memory density of 524288 bit and endurance of 1000000 cycles, it is ideal for systems requiring reliable non-volatile memory storage.
CAT24C256HU4IGT3
CAT24C256HU4IGT3 by Onsemi is an EEPROM with 32KX8 organization, 262144 bit memory density, and 1000000 Write/Erase cycles. It operates in synchronous mode at a max clock frequency of 0.4 MHz and has a serial I2C bus type. Ideal for industrial applications requiring reliable non-volatile memory storage.
CAT24C32WI-GT3
CAT24C32WI-GT3 by Onsemi is an 8-terminal EEPROM with a memory density of 32768 bits. It operates at a max clock frequency of 1 MHz and has a serial bus type of I2C. This industrial-grade device, with a package style of small outline, is suitable for applications requiring non-volatile memory storage in harsh environments.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
CAT24C512HU5IGT3
CAT24C512HU5IGT3 by Onsemi is a 64KX8 EEPROM with I2C serial bus, operating at 5V. It offers 524288 bit memory density, 0.4 MHz clock frequency, and 100ms data retention time. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact form factor.
CAT24C04WI-GT3
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; I2C Control Byte: 1010DDMR;
CAT24C04WI-GT3 by Onsemi is an EEPROM with 4Kx1 organization, operating at 3.3V. It features I2C control byte 1010DDMR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact package.
CAT24C02TDI-GT3A
CAT24C02TDI-GT3A by Onsemi is a 2Kx1 EEPROM with 2048-bit memory density. It operates at 3.3V, has I2C serial bus type, and supports synchronous mode. Ideal for industrial applications requiring reliable data storage with up to 1000000 write/erase cycles.
CAT25640VI-GT3
CAT25640VI-GT3 by Onsemi is an 8KX8 EEPROM with 20 MHz clock frequency, SPI serial bus type, and 1000000 write/erase cycles. Ideal for industrial applications requiring a memory density of 65536 bit, it operates at -40 to 85 °C with a supply voltage range of 1.8-5.5 V.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 1.8 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved