Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$9.090
Decca Corp
$15.000
$14.700
$14.553
Component Stockers USA
$99.990
Supply Digital
Corphita
RF & Microwave Amplifiers MGA-43728-BLKG attributes and parameters. Explore more RF & Microwave Amplifiers devices from Broadcom
Mounting Feature:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
PCN Obsolescence/ EOL - Mult Devices EOL 01/Dec/2017
PCN Assembly/Origin - PCB Process Update 24/Feb/2014
PCN Packaging - Mult Devices Packing 25/Apr/2018
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Yageo
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Diodes Incorporated
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
World Products
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Continental Device India
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
MGA-86563-TR1G
Broadcom
MGA-86563-TR1G by Broadcom is a wide band low power RF amplifier with a gain of 13.7 dB. It operates at frequencies ranging from 500 MHz to 6000 MHz and can handle a max input power of 13 dBm. This surface mount component is commonly used in RF and microwave applications requiring amplification within the specified frequency range.
HMC637ALP5ETR
Analog Devices
Analog Devices' HMC637ALP5ETR is a wide band medium power RF amplifier with 12 dB gain and 25 dBm CW input power. Operating from -40 to 85°C, it covers frequencies from 0 to 6000 MHz. Ideal for RF and microwave applications requiring high performance in a compact component package.
HMC636ST89ETR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 16 dBm;
BGU6102,147
NXP Semiconductors
NXP Semiconductors' BGU6102,147 is a wide band low power RF amplifier with 6 terminals and operates on 3V supply. With a max operating temperature of 85°C, it is ideal for surface mount applications in RF and microwave systems.
HMC998A
Analog Devices' HMC998A is a wide band medium power RF amplifier with 12 dB gain, operating from 0 to 22000 MHz. It can handle up to 27 dBm CW input power and has a max VSWR of 7. Ideal for RF & microwave applications requiring high performance in temperatures ranging from -55°C to 85°C.
MGA-635P8-TR1G
Broadcom's MGA-635P8-TR1G is a GAAS RF amplifier with 16.5 dB gain, operating from 2300 to 4000 MHz. It has a max input power of 20 dBm and operates on a 5V supply, making it ideal for wideband medium-power applications in RF and microwave systems. With a compact surface-mount package and high temperature range (-40 to 85°C), it offers reliable performance in various environments.
BGU8103
The NXP Semiconductors BGU8103 is a narrow band low power RF amplifier with a gain of 14.5 dB. It operates at frequencies b/w 1559 MHz and 1610 MHz, making it suitable for applications in the RF and microwave field. Its compact surface mount package and low power consumption of 1.6 mA make it an ideal choice for various wireless communication systems.
CMD291
Qorvo
WIDE BAND MEDIUM POWER;
HMC8411LP2FETR
Analog Devices' HMC8411LP2FETR is a wide band low power RF amplifier with 11 dB gain and 20 dBm max input power. Operating from -40 to 85°C, it covers frequencies from 10 MHz to 10 GHz. Ideal for RF and microwave applications requiring high performance in a compact form factor.
ADL5542ACPZ-R7
ADL5542ACPZ-R7 by Analog Devices is a wideband medium power RF amplifier with 11.2 dB gain, operating from 50 MHz to 6 GHz. It can handle up to 10 dBm CW input power and operates b/w -40°C to 85°C. Ideal for applications requiring high-frequency amplification in RF and microwave systems.
RDA1005LTR13
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Characteristic Impedance: 50 ohm;
HMC635LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 70 Cel;
RF3827
Qorvo's RF3827 is a wide band medium power amplifier with 20dB gain, operating from 5MHz to 1500MHz. It has a max input power of 13dBm and VSWR of 20, suitable for RF applications requiring up to 8V supply voltage. The component is constructed using GaAs technology in a plastic/epoxy package, ideal for surface mounting in various RF and microwave systems.
XB1007-QT-0G0T
M/a-com Technology Solutions
XB1007-QT-0G0T by M/a-com Technology Solutions is a GAAS wide band medium power RF amplifier with a gain of 23 dB. It operates at frequencies ranging from 4000 MHz to 11000 MHz and can handle a max input power of 20 dBm. This surface mount component is suitable for applications in RF and microwave amplification.
SGA3563Z
SGA3563Z by Qorvo is a wide band low power RF amplifier with 19.5 dB gain, operating from 0 to 5000 MHz. It has a max input power of 18 dBm and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
SKY65981-11
Skyworks Solutions
NARROW BAND LOW POWER;
RF6886TR13
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3.6;
HMC903LP3ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC589AST89E
Analog Devices' HMC589AST89E is a wide band low power RF amplifier with 13 dB gain and 8 dBm max input power. Operating from -40 to 85°C, it covers frequencies from 0 to 4000 MHz. Ideal for RF & microwave applications requiring high performance in a compact form factor.
TQP3M9037
TQP3M9037 by Qorvo is a wide band medium power RF amplifier with 18.5 dB gain, operating from 700 MHz to 6000 MHz. It has a max input power of 22 dBm and operates at temperatures ranging from -40°C to 105°C. Ideal for applications requiring high frequency amplification in RF and microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGA-43328-BLKG
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
MGA-425P8-TR1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
MGA-43628-BLKG
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 3;
MGA-43428-BLKG
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC28,.2SQ,20;
MGA-43228-BLKG
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 2300 MHz;
MGA-43728-TR1G
MGA-412P8-TR1G
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 1700 MHz;
MGA-43328-TR1G
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 20 dBm;
MGA-425P8-TR2
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 65 mA;
MGA-43528-TR1G
MGA-43428-TR1G
MGA-43128-TR1G
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 700 MHz;
MGA-43628-TR1G
MGA-425P8-BLK
MGA-43228-TR1G
MGA-412P8-BLKG
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 55 mA;
MGA-412P8-TR2G
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 23 dB;
MGA-43128-BLKG
NARROW BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Voltage Standing Wave Ratio: 6;
MGA-43528-BLKG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved