Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$18.000
$17.640
$17.464
AZTECH Wire
$21.510
Component Stockers USA
$99.990
Supply Digital
Authorized Procurement Solutions
Corphita
Visible LEDs HLMP-LB63-PT0ZZ attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HLMP-LB63-PT0ZZ Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Multiple Devices 04/Jan/2011
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Kingwell Technonlogy
Semtech
Diotec Semiconductor Ag
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
HLMP-1790
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
OVLLB8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; No. of Functions: 1;
SSL-LX5093AD-TR
Lumex
SINGLE COLOR LED;
5310F5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Color At Wavelength: Green; Height: 11 mm; Viewing Angle: 90 deg; Maximum Forward Current: .03 A;
3012
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.5; Lens Type: DIFFUSED; Packing Method: BULK;
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SML-210MTT86M
ROHM
ROHM SML-210MTT86M is a 1.4mm SINGLE COLOR LED with 0.025A max forward current and 13.0mcd nominal luminous intensity. Ideal for surface mount applications, it operates b/w -30°C to 85°C, emitting YELLOWISH GREEN light in a COLORLESS TRANSPARENT lens.
SML-D12U8WT86CP
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
HSMF-C155
Broadcom
HSMF-C155 by Broadcom is a dual color LED with separate, 2-element configuration. It has a size of 2.06 mm and a max forward current of 0.02 A. This LED is commonly used in applications that require high efficiency red/green lighting with a viewing angle of 170°.
LGM67K-G1J2-24-0-2-R18-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGM67K-G1J2-24-0-2-R18-Z is a 1.5mm single color LED with peak wavelength of 572nm and viewing angle of 120°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 4.45mcd.
150120RS75000
Wuerth Elektronik & Kg
150120RS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring red light emission in compact spaces, such as indicator lights in electronic devices.
HLMP-1503
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-1503 is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
HLMP-1719
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Additional Features: HIGH RELIABILITY;
158563460
550-5107F
Dialight
Dialight's 550-5107F is a 5mm red LED with max. forward current of 0.025A, peak wavelength of 650nm, and viewing angle of 50°. Ideal for indicator lights in electronics due to its diffused lens, T-1 3/4 size, and radial mount feature.
3002
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1; Lens Type: CLEAR YELLOW; Maximum Forward Current: .035 A;
XHP35B-00-0000-0D0BE240E
Wolfspeed
HLMP-4000#002
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Pitch: 1.27 mm;
LTST-C190GKTT
Lite-on Technology
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-S270KGKT
LTST-S270KGKT by Lite-on Technology is a 1.2mm GREEN single-color LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for surface mount applications, it has a viewing angle of 130° and min luminous intensity of 130cd, making it suitable for various lighting projects.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP3507
Three-five Systems
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
HLMP1790
Cml Technologies & Kg
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
National Semiconductor
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved