Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Color: YELLOW; No. of Functions: 2; No. of Characters: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Lakeland Logistics Inc
Bristol Electronics
Digiode
Ampacity Inc.
$1.100
Decca Corp
$10.000
$9.800
$9.702
AZTECH Wire
$18.130
Supply Digital
Corphita
Native Components
Northwest PG Solutions
LED Displays HDSM-291F attributes and parameters. Explore more LED Displays devices from Broadcom
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
HDSM-291F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - New Dice 26/May/2021
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Bytesonic Electronics
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
HDSP5503
Morrihan International
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 14 mm; Peak Wavelength (nm): 635; Configuration: Common Cathode;
TIL309A
TIL309A by Texas Instruments is a red LED display with peak wavelength of 660nm. It has a height of 6.9mm and max forward voltage of 5.5V, suitable for smart/normal numeric displays. Operating temp ranges from 0 to 85°C, making it ideal for various applications requiring clear and bright red numerical displays.
SA36-11SRWA
Kingbright Electronic
SA36-11SRWA by Kingbright Electronic is a common anode 7-segment LED display with a peak wavelength of 660nm. It has a max forward current of 0.03A and a max forward voltage of 2.5V. This display is suitable for applications requiring numeric displays with bright red color, such as digital clocks or temperature indicators.
HDLO-2416
Broadcom
HDLO-2416 by Broadcom is a SMART/NORMAL 5x7 LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color at 5.08mm height. Ideal for applications requiring complex configurations and displaying up to 4 functions in a compact space.
HDSP-2131
HDSP-2131 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -55°C to 85°C, featuring yellow color and complex configuration. Ideal for applications requiring high visibility and versatile character display in various environments.
PSA08-11EWA
Kingbright
16 SEG ALPHANUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A; No. of Functions: 1; Color: HIGH EFFICIENCY RED;
HDSP-A151
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Color At Wavelength: Red; Peak Wavelength (nm): 645; Minimum Operating Temperature: -20 Cel;
LSP6-W-XXX
Dialight
SINGLE COLOR LED DISPLAY CLUSTER; No. of Functions: 1; Color: COOL WHITE; Maximum Forward Current: .35 A;
C-563SR-G/W
American Opto Plus Led
LED Displays;
SL1450L
SL1450L by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. It operates b/w -20 °C to 65°C, displaying red color at 15mm height. Ideal for applications requiring a compact and efficient numeric display solution.
5082-7620
Three-five Systems
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 583; Maximum Forward Voltage: 2.5 V; Display Height: 8 mm; Maximum Operating Temperature: 100 Cel;
HDSP-F153
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 645; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 100 Cel;
HDSP2113S
HDSP2113S by Infineon Technologies is an 8-character LED display with a peak wavelength of 558nm, ideal for applications requiring a green color output. With a display height of 4.8mm and max forward voltage of 5.5V, it operates in temperatures ranging from -40°C to 85°C.
ACDA03-41SGWA-F01
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 2 DIGITS WITH DECIMAL POINT; No. of Functions: 2; Color: SUPER BRIGHT GREEN; Maximum Forward Current: .025 A; Display Height: 7.62 mm;
HDSP-7403
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; No. of Characters: 1;
SL5722T
The Onsemi SL5722T is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm, ideal for applications requiring green light emission. With a display height of 18mm and operating temperatures ranging from -20 °C to 65°C, it offers clear visibility in various environments. Perfect for showcasing up to 6 characters in LED displays.
SLF722D
LED Displays; Peak Wavelength (nm): 558; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel;
GW5BNF15L00
Sharp Corporation
Sharp Corporation's GW5BNF15L00 is a complex LED display with single color white cluster. It has a max forward current of 0.72A and operates b/w -30 to 90°C. Ideal for applications requiring bright, energy-efficient lighting such as signage, displays, and indicators.
HDSP-431G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 10 mm; Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.5 V; JESD-609 Code: e0;
HDSP-816E
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .025 A; Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSM-283C
HDSM-283C by Broadcom is a 7-segment numeric LED display with common cathode configuration. It has a max forward current of 0.025A and operates b/w -40°C to 105°C. Ideal for applications requiring a red LED display with a height of 7mm, such as digital clocks or temperature indicators.
HDSM-431C
HDSM-431C by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 644 nm, making it ideal for applications requiring a bright RED display with a height of 10 mm.
HDSM-281C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Voltage: 2.6 V; Color At Wavelength: Red; No. of Characters: 1;
HDSM-281B
HDSM-281B by Broadcom is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and peak wavelength of 462nm, making it ideal for applications requiring blue color displays. With a display height of 7mm and operating temperatures ranging from -40°C to 105°C, this LED display is suitable for various electronic projects.
HDSM-431H
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; Display Height: 10 mm; No. of Characters: 1;
HDSM-281F
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Display Height: 7 mm; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; Maximum Forward Voltage: 2.6 V;
HDSM-281H
Broadcom's HDSM-281H is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and operates b/w -40 to 105°C. Ideal for applications requiring a green color display with a height of 7mm, such as digital clocks or temperature indicators.
HDSM-543B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; No. of Characters: 2;
HDSM-293F
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Color At Wavelength: Amber; Minimum Operating Temperature: -40 Cel; Configuration: COMMON CATHODE, MULTIPLEXED, 2 DIGITS WITH DECIMAL POINT; Maximum Operating Temperature: 105 Cel;
HDSM-431B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; JESD-609 Code: e3; Color: BLUE; No. of Functions: 1; Display Height: 10 mm;
HDSM-283B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Peak Wavelength (nm): 462; JESD-609 Code: e3; Display Height: 7 mm; Maximum Forward Voltage: 4 V;
HDSM-433C
HDSM-433C by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 10mm, peak wavelength of 644nm, and max forward current of 0.025A. Ideal for applications requiring a red/orange-red color display, it operates b/w -40 to 105°C temperatures.
HDSM-533C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Voltage: 2.6 V; Peak Wavelength (nm): 632; Color At Wavelength: Orange-Red; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT;
HDSM-533H
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Voltage: 2.6 V; Color: GREEN; Color At Wavelength: Green-Yellow; No. of Functions: 1;
HDSM-541W
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; No. of Functions: 2; Display Height: 14.22 mm; Color At Wavelength: White; No. of Characters: 2;
HDSM-543C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Current: .025 A; Display Height: 14.22 mm; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3;
HDSM-283L
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; No. of Characters: 1; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Orange; Color: ORANGE;
HDSM-291B
7 SEG NUMERIC LED DISPLAY; Nominal Luminous Intensity (mcd): 6.7; Terminal Finish: TIN; JESD-609 Code: e3; Peak Wavelength (nm): 462; Packing Method: TR;
HDSM-203C
7 SEG NUMERIC LED DISPLAY;
HDSM-291C
The Broadcom HDSM-291C is a 7-segment numeric LED display with common anode configuration. It features 2 digits with decimal point, peak wavelength of 632nm, and max forward current of 0.025A. Ideal for applications requiring compact displays with red/orange-red color output in temperature range -40 to 105°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved