Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; No. of Characters: 1; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Orange; Color: ORANGE;
Median Price
$3.325
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.300
100+ parts
$1.760
1k+ parts
$1.450
10k+ parts
$1.280
DigiKey
$3.350
$1.916
$1.605
$1.470
Digiode
$2.109
-
Vyrian
$2.220
Bristol Electronics
$1.219
$0.999
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Lakeland Logistics Inc
Corphita
$1.998
Decca Corp
$2.800
$2.744
$2.717
Eastek
$2.193
Northwest PG Solutions
Supply Digital
Perfect Parts
Native Components
LED Displays HDSM-283L attributes and parameters. Explore more LED Displays devices from Broadcom
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Sub-Category:
Terminal Finish:
HDSM-283L Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - New Dice 26/May/2021
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
Uniohm
General Semiconductor
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LDD-A512RI
Lumex
Lumex LDD-A512RI LED display features 2 digits with decimal point, max forward current of 0.025A, and peak wavelength of 568nm. Ideal for smart/normal numeric displays in applications requiring green color output, operating b/w -40°C to 85°C temperature range.
HDSP-U303
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Peak Wavelength (nm): 583; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Yellow;
HDSP-5703
Broadcom
HDSP-5703 by Broadcom is a COMMON CATHODE LED display with 1 digit and decimal point. Featuring a peak wavelength of 583nm, it operates b/w -40°C to 100°C. Ideal for applications requiring a SMART/NORMAL 7 SEG NUMERIC display in yellow color with a height of 14.2mm.
TIL325A
TIL325A by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 588nm. It has common anode configuration, orange color at 13mm display height. With max operating temp of 85°C and min of -25°C, it operates at max forward voltage of 3V. Ideal for applications requiring bright numeric displays in various electronic devices.
SL1013
Onsemi
SL1013 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm, red color. It has 4 characters and display height of 8mm. Ideal for applications requiring temp range -20 to 65 °C like digital clocks and electronic meters.
SC52-11SRWA
Kingbright Electronic
Kingbright Electronic's SC52-11SRWA is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has a max forward current of 0.03A and operates b/w -40 to 85°C. Ideal for applications requiring a SUPER BRIGHT RED display with a height of 13.2mm.
HDSP-2112
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Display Height: 5.08 mm; No. of Functions: 8; Peak Wavelength (nm): 635;
3078
Nte Electronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Color: RED; Maximum Forward Current: .03 A; Display Height: 14.224 mm; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
HDSP-315G
HDSP-315G by Broadcom is a COMMON ANODE LED Display with 10mm height, emitting GREEN light at 566nm. It has a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications in temperatures ranging from -40°C to 100°C.
5082-7651
Fairchild Semiconductor
Fairchild Semiconductor's 5082-7651 LED display features COMMON ANODE configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for SMART/NORMAL numeric displays with HIGH EFFICIENCY RED color at 10.92mm height. Operates b/w -40 to 85°C, with a max forward voltage of 2.5V for various applications.
LTC-2621E
Lite-on Technology
LTC-2621E by Lite-on Technology is a COMMON ANODE, MULTIPLEXED 7 SEG NUMERIC LED DISPLAY with 3 digits and decimal point. It has a max forward current of 0.025A and operates b/w -35 to 85 °C. Ideal for applications requiring an ORANGE RED display with a height of 7mm.
HCMS-3912
Broadcom's HCMS-3912 LED Display features a 5x7 dot matrix with 8 functions, emitting an orange-red color at peak wavelength of 641nm. With a display height of 3.71mm and max forward voltage of 5.5V, it is ideal for applications requiring complex configurations in temperature range from -40 to 85°C.
HDSP-7503-CD000
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Functions: 1; Color: HIGH EFFICIENCY RED; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e1;
LDS-HTC304RI
Lumex LDS-HTC304RI is a red LED display with common cathode configuration. It features 7-segment numeric design, 0.03A max forward current, and 7.8mm display height. Ideal for applications requiring temperature range of -40 to 105°C such as digital clocks or timers.
SL1284-27
SL1284-27 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25 °C to 70°C, emitting Red light at 700nm peak wavelength. With a display height of 10mm and max forward voltage of 2.4V, it's ideal for applications requiring compact, bright numeric displays.
TIL384
TIL384 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 4 characters, red color at wavelength, and display height of 3mm. With max forward voltage of 1.9V, it operates b/w -10°C to 70°C making it ideal for digital displays in various electronic applications.
LTP1557AG
Taiwan Liton Electronic C
LTP1557AG by Taiwan Liton Electronic C is a 5x7 dot matrix LED display with common anode configuration. It operates at temperatures from -35°C to 85°C, emitting green light at peak wavelength of 565nm. With a max forward current of 0.013A and voltage of 2.8V, it's ideal for applications requiring high visibility displays in various electronic devices.
HDSP-0760
SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMPLEX; No. of Characters: 1; Minimum Operating Temperature: -55 Cel; No. of Functions: 1;
HDSP-2111
HDSP-2111 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -45°C to 85°C, featuring yellow color at wavelength. Ideal for applications requiring complex configurations and displaying up to 8 characters with a 5mm height.
SL1452
SL1452 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm, red color. It has 4 characters, 8mm display height, and operates b/w -20 °C to 65°C. Ideal for applications requiring clear numeric displays in various temperature conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSM-283C
HDSM-283C by Broadcom is a 7-segment numeric LED display with common cathode configuration. It has a max forward current of 0.025A and operates b/w -40°C to 105°C. Ideal for applications requiring a red LED display with a height of 7mm, such as digital clocks or temperature indicators.
HDSM-431C
HDSM-431C by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 644 nm, making it ideal for applications requiring a bright RED display with a height of 10 mm.
HDSM-281C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Voltage: 2.6 V; Color At Wavelength: Red; No. of Characters: 1;
HDSM-281B
HDSM-281B by Broadcom is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and peak wavelength of 462nm, making it ideal for applications requiring blue color displays. With a display height of 7mm and operating temperatures ranging from -40°C to 105°C, this LED display is suitable for various electronic projects.
HDSM-431H
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; Display Height: 10 mm; No. of Characters: 1;
HDSM-281F
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Display Height: 7 mm; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; Maximum Forward Voltage: 2.6 V;
HDSM-281H
Broadcom's HDSM-281H is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and operates b/w -40 to 105°C. Ideal for applications requiring a green color display with a height of 7mm, such as digital clocks or temperature indicators.
HDSM-543B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .025 A; No. of Characters: 2;
HDSM-293F
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Color At Wavelength: Amber; Minimum Operating Temperature: -40 Cel; Configuration: COMMON CATHODE, MULTIPLEXED, 2 DIGITS WITH DECIMAL POINT; Maximum Operating Temperature: 105 Cel;
HDSM-431B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; JESD-609 Code: e3; Color: BLUE; No. of Functions: 1; Display Height: 10 mm;
HDSM-283B
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Peak Wavelength (nm): 462; JESD-609 Code: e3; Display Height: 7 mm; Maximum Forward Voltage: 4 V;
HDSM-433C
HDSM-433C by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 10mm, peak wavelength of 644nm, and max forward current of 0.025A. Ideal for applications requiring a red/orange-red color display, it operates b/w -40 to 105°C temperatures.
HDSM-533C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Voltage: 2.6 V; Peak Wavelength (nm): 632; Color At Wavelength: Orange-Red; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT;
HDSM-533H
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Voltage: 2.6 V; Color: GREEN; Color At Wavelength: Green-Yellow; No. of Functions: 1;
HDSM-541W
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; No. of Functions: 2; Display Height: 14.22 mm; Color At Wavelength: White; No. of Characters: 2;
HDSM-543C
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; Maximum Forward Current: .025 A; Display Height: 14.22 mm; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3;
HDSM-291B
7 SEG NUMERIC LED DISPLAY; Nominal Luminous Intensity (mcd): 6.7; Terminal Finish: TIN; JESD-609 Code: e3; Peak Wavelength (nm): 462; Packing Method: TR;
HDSM-203C
7 SEG NUMERIC LED DISPLAY;
HDSM-291C
The Broadcom HDSM-291C is a 7-segment numeric LED display with common anode configuration. It features 2 digits with decimal point, peak wavelength of 632nm, and max forward current of 0.025A. Ideal for applications requiring compact displays with red/orange-red color output in temperature range -40 to 105°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved