Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED;
Median Price
$0.260
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.087
1k+ parts
$0.059
10k+ parts
-
Digiode
$0.247
Vyrian
Decca Corp
$0.221
$0.217
$0.214
Corphita
$0.234
Native Components
$30.820
$29.587
Northwest PG Solutions
$33.902
Authorized Procurement Solutions
Supply Digital
Visible LEDs ASMD-CWG7-NX7F2 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Optoelectronic Type:
ASMD-CWG7-NX7F2 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
APT2012SRCPRV
Kingbright Electronic
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
HSMH-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-1719
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
CMD15-21UBC/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 45.0; Lens Type: CLEAR; Size: 2 mm;
HLMP-3507-D00B1
Broadcom
HLMP-3507-D00B1 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°, making it ideal for applications requiring high performance green light emission in bulk packaging.
VLMB1500-GS08
VLMB1500-GS08 by Vishay Intertechnology is a 0.5mm BLUE SINGLE COLOR LED with a peak wavelength of 468nm, max forward current of 0.03A, and max forward voltage of 3.15V. Ideal for surface mount applications requiring a viewing angle of 130° and nominal luminous intensity of 28mcd.
HSMS-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
TLHG4400
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Size: 3 mm;
VLMS1500-GS08
VLMS1500-GS08 by Vishay Intertechnology is a 0.5mm SINGLE COLOR LED with peak wavelength of 639nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring SUPER RED illumination in compact spaces.
LGL29K-G2J1-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-G2J1-24 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 3.9mcd.
TLMO1000-GS08
TLMO1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 610nm and max forward current of 0.015A. Ideal for applications requiring soft orange light, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
4304H5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Viewing Angle: 75 deg; Height: 9.4 mm;
L-937EGW
L-937EGW by Kingbright Electronic is a 3mm dual color LED with common bipolar terminal. It has a max forward current of 0.03A and peak wavelengths of 627nm/565nm, suitable for applications requiring high efficiency red/green light emission. With a diffused white lens and radial mount feature, it offers a viewing angle of 60° and nominal luminous intensity of 20.0mcd.
4501-2-2-001
Wilbrecht Electronics
LTST-C235KGKRKT
Lite-on Technology
LTST-C235KGKRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and SEPARATE, 2 ELEMENTS configuration. It has a peak wavelength of 639/574nm, max forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring compact size and high luminous intensity.
HSMF-C155
HSMF-C155 by Broadcom is a dual color LED with separate, 2-element configuration. It has a size of 2.06 mm and a max forward current of 0.02 A. This LED is commonly used in applications that require high efficiency red/green lighting with a viewing angle of 170°.
LTST-C170KRKT-5A
597-5004-402F
Dialight
Dialight's 597-5004-402F is a single color LED with peak wavelength of 635nm and forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 152° and luminous intensity of 50.0mcd, making it suitable for bright red lighting needs.
MSL0104RGBU12Y
ROHM
ROHM's MSL0104RGBU12Y is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has max forward current of 0.04A, operates b/w -40 to 85°C, and offers red/green/blue colors. Ideal for surface mount applications requiring nominal luminous intensity of 700/1200/400 mcd.
LTST-C191TBKT-5A
Visible LEDs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMD-CWG7-NX7D2
ASMD-CWG7-NX7C2
ASMD-FWG3-NPTC6
ASMD-FWG0-NPSA6
ASMD-DWG3-NCGH3
ASMD-CWG7-NX7J2
ASMD-CWG7-NX7B2
ASMD-FWG0-NPSG6
ASMD-CWG7-NX7E2
ASMD-DWG3-NBFB3
ASMD-DWG3-NCGC3
ASMD-DWG3-NCGG3
ASMD-CWG7-NX7H2
ASMD-DWG3-NCGJ3
ASMD-DWG3-NCGD3
ASMD-DWG3-NBFA3
ASMD-CWG7-NX7A2
ASMD-DWG3-NCGE3
ASMD-CWG7-NX7G2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved