Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED;
Median Price
$69.000
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Native Components
$0.465
$0.446
Northwest PG Solutions
$0.512
$0.451
Decca Corp
$6.000
$5.880
$5.821
Supply Digital
Corphita
RF/Microwave Mixers AMMP-6545 attributes and parameters. Explore more RF/Microwave Mixers devices from Broadcom
RF or Microwave Device Type:
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ROHM
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Formosa Microsemi
HMC8192
Analog Devices
Analog Devices' HMC8192 is an RF/Microwave Mixer with 23 dBm CW input power, 12 dB conversion loss, and 50 ohm impedance. It operates from -55 °C to 85°C, suitable for image rejection applications in the frequency range of 20-42 GHz.
TL442CN3
Texas Instruments
TL442CN3 by Texas Instruments is a 14-terminal RF/Microwave Mixer with bipolar technology. It operates b/w 0°C to 70°C, featuring a plastic/epoxy package body material for through-hole mounting. Ideal for applications requiring high-frequency signal mixing in various electronic devices.
LTC5542IUH#PBF
LTC5542IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1600-2700 MHz. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
MAX19757ETX+T
Maxim Integrated
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum Supply Current: 420 mA;
HMC1056LP4BE
Hittite Microwave
IMAGE REJECTION; Maximum Operating Frequency: 12000 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Conversion Loss: 11 dB; Construction: COMPONENT;
AD8343ARUZ-REEL7
AD8343ARUZ-REEL7 by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating voltage of 5V, and max freq of 2500MHz. It has a VSWR of 2 and operates b/w -40 to 85°C. Ideal for applications requiring double balanced RF or microwave devices in surface mount technology.
HMC615LP4ETR
Analog Devices' HMC615LP4ETR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, draws max 75mA current, and features double balanced technology. Ideal for surface mount applications in various RF and microwave systems.
HMC339
Analog Devices' HMC339 is a RF/Microwave Mixer with 50 ohm impedance, operating from 33-42 GHz. It offers a max conversion loss of 13 dB and can handle up to 13 dBm CW input power. Ideal for applications requiring high-frequency signal mixing in environments ranging from -55°C to 85°C.
RMS-30
Mini-circuits
The Mini-circuits RMS-30 is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a low conversion loss of 9.8 dB and can handle up to 17 dBm input power. Ideal for RF/microwave applications requiring double balanced mixers in surface mount packages.
HMC129
Analog Devices' HMC129 is a GaAs RF/Microwave Mixer with double balanced technology. It operates from -55°C to 85°C, covering frequencies from 4 GHz to 8 GHz. With a low conversion loss of 9 dB and characteristic impedance of 50 ohm, it's ideal for high-frequency applications.
MAX9984ETP+T
Analog Devices' MAX9984ETP+T is a BICMOS RF/Microwave Mixer with 20 terminals, operating at -40 to 85 °C. It requires a 5V power supply and draws a max current of 265mA. This surface-mount device in plastic/epoxy package is ideal for various RF applications.
LTC5541IUH#PBF
LTC5541IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high-frequency signal mixing in various RF systems.
CMY210
Infineon Technologies' CMY210 is a GAAS RF/Microwave Mixer with 17 dBm CW input power, 7 dB conversion loss, and 500-2500 MHz frequency range. Featuring a double balanced design, it's ideal for surface mount applications requiring high-frequency signal mixing in a 50 ohm system.
HMC272AMS8ETR
Analog Devices' HMC272AMS8ETR is a GAAS technology RF mixer with 8 terminals. Operating from -40 to 85 °C, it's a single balanced device in a surface mount package. Ideal for RF/microwave applications requiring high performance and reliability.
HMC688LP4TR
Analog Devices' HMC688LP4TR is a triple balanced RF mixer with 24 terminals, operating at temperatures from -40 to 85 °C. It requires a 5V power supply and draws a max current of 168mA. This BICMOS technology device is ideal for RF/microwave applications due to its surface mount package body material made of plastic/epoxy.
LTC5510IUF#PBF
LTC5510IUF#PBF by Analog Devices is a RF/Microwave Mixer with max input power of 15 dBm, operating freq range of 1-6000 MHz, and characteristic impedance of 50 ohm. It is ideal for applications requiring high frequency mixing such as wireless communication systems and radar systems.
HMC620LC4
HMC620LC4 by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, 9 dB conversion loss, and 3000-7000 MHz frequency range. It can handle up to 20 dBm CW input power and operates b/w -55 to 85 °C. Ideal for applications requiring double balanced mixers in high-frequency circuits.
HMC557ALC4
Analog Devices' HMC557ALC4 is a GAAS double balanced RF/Microwave Mixer with 24 terminals. It operates b/w -40°C to 85°C, featuring a ceramic package and W/Ni/Au terminal finish. Ideal for surface mount applications in various RF and microwave systems.
CMY211
Qorvo
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC141LH5
Analog Devices' HMC141LH5 is a RF/Microwave Mixer with 13 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 7-14 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AMMP-6530-TR1
Broadcom
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 30000 MHz; Construction: COMPONENT;
Agilent Technologies
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC8,.2SQ,28; Terminal Finish: Tin/Lead (Sn/Pb);
AMMP-6545-BLKG
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 25 dBm; Characteristic Impedance: 50 ohm;
AMMP-6530
IMAGE REJECTION; Maximum Operating Frequency: 30000 MHz; JESD-609 Code: e4; Maximum Conversion Loss: 10 dB; Minimum Operating Frequency: 5000 MHz; Characteristic Impedance: 50 ohm;
AMMP-6530-BLK
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm;
AMMP-6530-TR2
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 5000 MHz; Package Equivalence Code: LCC8,.2SQ,28;
AMMP-6545-TR1G
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 125 Cel; Maximum Conversion Loss: 12 dB;
AMMP-6545-TR2G
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Maximum Operating Frequency: 40000 MHz;
AMMP-6546
TRIPLE BALANCED;
AMMP-6546-BLKG
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm;
AMMP-6546-TR1G
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Package Equivalence Code: LCC8,.2SQ,28;
AMMP-6546-TR2G
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 40000 MHz; Minimum Operating Frequency: 18000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved