Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 7400.0; Lens Type: TINTED NONDIFFUSED; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$8.881
Northwest PG Solutions
$9.769
$8.792
AZTECH Wire
$13.510
Decca Corp
$20.000
$19.600
$19.404
Supply Digital
Corphita
Visible LEDs ALMD-EG3D-WX002 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Peak Wavelength (nm):
Shape:
Viewing Angle:
ALMD-EG3D-WX002 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 18/Dec/2020
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
150060VS73220
Wuerth Elektronik & Kg
SINGLE COLOR LED;
LTST-C170KRKT-5A
Lite-on Technology
LYR976-PS-36
Osram Opto Semiconductors
Osram Opto Semiconductors' LYR976-PS-36 is a single color LED with peak wavelength of 591nm, ideal for amber light applications. With a max forward current of 0.025A and viewing angle of 160°, it offers high luminous intensity at 162.5mcd for surface mount installations.
HLMP4700
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 8.6 mm; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Red;
150141VS73100
150141VS73100 by Wuerth Elektronik & Kg is a WATER CLEAR SINGLE COLOR LED with a peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 90.0mcd. Ideal for applications requiring BRIGHT GREEN light emission in compact spaces due to its small size (2.4mm) and surface mounting feature.
HLMP-1301-G0000
Broadcom
Broadcom's HLMP-1301-G0000 is a 3mm single color LED with peak wavelength of 635nm. With max forward current of 0.03A, it offers high efficiency red light for various applications like indicators and displays. Operating b/w -55°C to 100°C, this LED has a viewing angle of 60° and nominal luminous intensity of 12.6mcd.
XHP35B-00-0000-0D0UB230G
Cree Led
CLV1A-FKB-CK1VW1DE1BB7C3C3
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 635.0/1430.0/285.0; Configuration: COMMON ANODE, 3 ELEMENTS; Maximum Operating Temperature: 85 Cel;
150080YS75000
150080YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm, forward current of 0.03A, and luminous intensity of 120.0mcd. Ideal for surface mount applications in electronics, providing a viewing angle of 140° for efficient illumination in compact spaces.
HLMP-4000
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-LX1610UWC/A
Lumex
Lumex SML-LX1610UWC/A is an 8mm single color LED with clear lens, max forward current of 0.35A, and viewing angle of 110°. Ideal for surface mount applications in temperature range -20 to 70 °C, offering white light with luminous intensity of 3.5 mcd.
TLHB4400
Vishay Telefunken
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: TINTED DIFFUSED; Maximum Forward Current: .02 A;
HSMS-C170
HSMS-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light emission in surface mount configurations.
SML-P24MUWT86R
ROHM
ROHM's SML-P24MUWT86R is a 1mm DUAL COLOR LED with MILKY WHITE lens. It has max forward current of 0.02A, operating temp range -40 to 85°C. Ideal for applications requiring compact surface mount LEDs with red/yellowish green colors and nominal luminous intensity of 52.0/21.0 mcd.
HLMP3507
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HSMF-C116
HSMF-C116 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 631/520/466 nm. It has a max forward current of 0.01 A and nominal luminous intensities of 80.0/220.0/45.0 mcd, suitable for surface mount applications requiring red/green/blue illumination in compact devices.
598-8091-107F
Dialight
Dialight's 598-8091-107F is a single color LED with blue light at 140° viewing angle. It has a size of 1.1 mm and operates b/w -40 to 100 °C, ideal for surface mount applications requiring max forward current of 0.02 A.
CMD6722SRUGCTR8
Visual Communications Company
CMD6722SRUGCTR8 by Visual Communications Company is a 2.4mm dual color LED with separate configuration and clear lens. It has a max forward current of 0.03A and peak wavelengths of 660nm (red) and 565nm (green). This surface mount LED is suitable for applications requiring a round shape, such as indicator lights or displays.
HLMP1719
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .007 A; Viewing Angle: 50 deg; Peak Wavelength (nm): 583;
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALMD-EL3D-VX002
ALMD-EL3D-VX002 by Broadcom is a SINGLE COLOR LED with peak wavelength of 594nm and max forward current of 0.05A. Ideal for applications requiring amber light, it has a viewing angle of 30° and nominal luminous intensity of 6750mcd.
ALMD-LL36-WZ002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2140.0; Lens Type: TINTED DIFFUSED; Terminal Finish: SILVER;
ALMD-CB3D-SU002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 3050.0; Lens Type: TINTED NONDIFFUSED; Viewing Angle: 30 deg;
ALMD-EL2E-XZ002
Visible LEDs;
ALMD-CM3D-XZ002
ALMD-CM3D-XZ002 by Broadcom is a single color LED with peak wavelength of 516nm and max forward current of 0.03A. It is used for visible applications, has a viewing angle of 30°, and nominal luminous intensity of 11600.0 mcd.
ALMD-EG3D-WY002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8750.0; Lens Type: TINTED NONDIFFUSED; Peak Wavelength (nm): 634;
ALMD-EL1E-Z2002
ALMD-CY3G-YZ002
ALMD-LL37-XZ002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2280.0; Lens Type: TINTED DIFFUSED; Terminal Pitch: 2.35 mm;
ALMD-LM36-14002
ALMD-LM36-14002 by Broadcom is a single color LED with peak wavelength of 516nm and max forward current of 0.03A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Features tinted diffused lens, oval shape, and surface mounting feature.
ALMD-CB1E-VW002
ALMD-CY3F-YZ002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 12650.0; Lens Type: CLEAR; Configuration: SINGLE;
ALMD-EG1E-Z2002
ALMD-CB3D-RS302
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: TINTED NONDIFFUSED; Maximum Forward Current: .03 A;
ALMD-CB3D-RR102
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 1700.0; Lens Type: TINTED NONDIFFUSED; Minimum Operating Temperature: -40 Cel;
ALMD-CB3D-RS402
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: TINTED NONDIFFUSED; Configuration: SINGLE;
ALMD-CB3D-RS502
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: TINTED NONDIFFUSED; Shape: ROUND;
ALMD-CB2E-UV002
ALMD-CB3D-RR202
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 1700.0; Lens Type: TINTED NONDIFFUSED; Maximum Operating Temperature: 85 Cel;
ALMD-CB3D-RT002
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2350.0; Lens Type: TINTED NONDIFFUSED; Color: BLUE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved