Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Broadcom's ACSL-6310-00TE is a 3-channel logic IC output optocoupler with separate configuration. It operates at -40 to 100 °C and offers 2500V isolation voltage. With a data rate of 15 MBps, it is ideal for applications requiring high-speed signal transmission in electronic circuits.
Median Price
$6.880
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$5.260
100+ parts
$3.200
1k+ parts
$3.140
10k+ parts
-
Newark
$5.370
$3.040
Mouser Electronics
$4.120
$3.840
DigiKey
$7.510
$4.605
$3.985
$3.857
Element14
$10.450
$6.370
$5.880
EBV Elektronik
Digiode
$5.358
Vyrian
$5.640
VNN
Chip Stock
Bristol Electronics
Speed Components Ltd
Nova Conductors
Whistler Technology
Decca Corp
$4.790
$4.694
$4.647
Corphita
$5.076
Continental Prestige Electronics
$6.870
$3.700
Glotronic Ltd.
Perfect Parts
Authorized Procurement Solutions
Supply Digital
Argo Parts USA
Aranea Global
Having separate channels allows for independent control of each function, providing versatility and customization in how the optocoupler circuit outputs are utilized.
The high maximum forward current capacity ensures that the optocoupler can handle a variety of loads and offers reliable performance in different applications.
The low minimum supply voltage requirement makes the optocoupler circuit outputs energy-efficient and suitable for use in low-power systems.
With a fast response time of 100 nanoseconds, this optocoupler circuit outputs are ideal for applications requiring quick signal transmission and accurate data transfer.
The high isolation voltage capability ensures safe operation by providing effective electrical insulation between input and output circuits, reducing the risk of voltage spikes or interference.
Optocoupler Circuit Outputs ACSL-6310-00TE attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Broadcom
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Nominal Response Time:
Sub-Category:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
ACSL-6310-00TE Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - ACSLx 27/Feb/2023
PCN Assembly/Origin - ACSL 19/Aug/2016
PCN Packaging - Marking/Labeling Revision B 14/Jan/2014 Multiple Devices Marking/Labeling 07/Aug/2013
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Asi Semiconductor
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
HCPL-0731-060E
Broadcom
Broadcom's HCPL-0731-060E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.02A and min supply voltage of 4.5V, making it ideal for logic IC output applications. With a high isolation voltage of 3750V and surface mounting feature, this rectangular-shaped optocoupler operates b/w 0 to 70°C efficiently.
HCPL-2601SD
Fairchild Semiconductor's HCPL-2601SD is a single optocoupler with a max forward current of 0.05A and isolation voltage of 2500V. It operates b/w -40°C to 85°C, has a data rate of 10MBps, and is commonly used in logic IC output applications.
HCPL-0600-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
HCPL2531
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 19 %; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 2500 V;
6N135
Toshiba
LOGIC IC OUTPUT OPTOCOUPLER; No. of Elements: 1; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum On State Current: .008 A; No. of Functions: 1;
HCPL-063L
Broadcom's HCPL-063L is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures from -40 to 85°C. Ideal for logic IC output applications, it offers high isolation voltage of 3750V and fast response time of 90ns.
OPI1268
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .025 A; Maximum Isolation Voltage: 16000 V;
HCPL2630SDM
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Configuration: SEPARATE, 2 CHANNELS;
HCPL0637R2
Onsemi
HCPL0637R2 by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It offers 3750V isolation voltage, 100ns response time, and 10MBps data rate. Ideal for applications requiring high-speed signal isolation in harsh environments.
MID400SV
The Onsemi MID400SV is a single optocoupler with logic IC output. It has a max forward current of 0.03A and isolation voltage of 2500V. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various electronic circuits requiring high isolation levels.
6N137
Telefunken Microelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 50 ns;
6N136
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel;
6N136SDM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: TTL COMPATIBLE, UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .025 A;
6N137S-TA1
6N137S-TA1 by Lite-on Technology is a single optocoupler with max. forward current of 0.02 A, min. supply voltage of 2.7 V, and max. operating temp of 85°C. Ideal for logic IC output applications due to its fast response time (21 ns), high isolation voltage (5000 V), and data rate of 15 MBps in surface mount configuration.
Renesas Electronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Nominal Response Time: 50 ns; Minimum Operating Temperature: 0 Cel;
HCPL-0600.R2
Fairchild Semiconductor's HCPL-0600.R2 is a single optocoupler with a max forward current of 0.05A and isolation voltage of 2500V. It features logic IC output, operates b/w -40 to 85°C, and has a data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in harsh environments.
HCPL-0211
Broadcom's HCPL-0211 is a single optocoupler with logic IC output, offering 3750V isolation voltage. With a max forward current of 0.01A and response time of 30ns, it operates b/w -40 to 85°C. Ideal for applications requiring high-speed data transmission at 5MBps in surface mount configurations.
HCPL-2630
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 2; JESD-609 Code: e0; Minimum Supply Voltage: 4.5 V; Maximum Forward Current: .015 A;
HCPL0731
The Onsemi HCPL0731 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.02A and min CTR of 400%. Ideal for logic IC output applications, it offers high isolation voltage of 2500V and operates b/w -40 to 85°C.
TLP109(E(O
Toshiba's TLP109(E(O optocoupler features a max forward current of 0.02A, isolation voltage of 3750V, and operating temperatures ranging from -55°C to 125°C. Ideal for logic IC output applications due to its single configuration and max on-state current of 0.008A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACSL-6400-00TE
Broadcom's ACSL-6400-00TE is a 4-channel logic IC output optocoupler with separate configuration. It operates at -40 to 100 °C and offers 2500V isolation voltage. Ideal for applications requiring high-speed data transmission up to 15 MBps in surface mount setups.
ACSL-6210-00RE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .015 A; Maximum On State Current: .05 A; Nominal Supply Voltage: 5.5 V;
ACSL-7210-00RE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Nominal Response Time: 27 ns;
ACSL-6420-00TE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Nominal Supply Voltage: 5.5 V; JESD-609 Code: e3; Maximum Isolation Voltage: 2500 V;
ACSL-6210-50RE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .13 W; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 100 ns;
ACSL-6210-06RE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .015 A; Maximum Power Dissipation: .13 W; Maximum On State Current: .05 A;
ACSL-6210-56R
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Response Time: 100 ns; Maximum On State Current: .05 A; Maximum Forward Current: .015 A;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5.5 V;
ACSL-6210-56RE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Maximum Forward Current: .015 A;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 3 V; No. of Functions: 2; Maximum Power Dissipation: .06 W;
ACSL-6400-50TE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; No. of Functions: 4; Maximum Operating Temperature: 100 Cel; Nominal Data Rate: 15 MBps;
ACSL-7210-06RE
ACSL-7210-06RE by Broadcom is a single optocoupler circuit output with a max forward current of 0.00001 A. It operates at temperatures ranging from -40 to 105 °C and has a max isolation voltage of 3750 V. This device is commonly used in logic IC output applications with a nominal data rate of 25 MBps.
ACSL-6410-00TE
Broadcom's ACSL-6410-00TE is a 4-channel logic IC output optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 100°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
ACSL-7210-50RE
Broadcom's ACSL-7210-50RE is a single optocoupler with a max forward current of 0.00001A and 3750V isolation voltage. Ideal for logic IC output applications, it operates b/w -40°C to 105°C, with a data rate of 25MBps and max on-state current of 0.01A.
ACSL-7210-56RE
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Maximum Operating Temperature: 105 Cel; Maximum Forward Current: .00001 A; Maximum On State Current: .01 A; Additional Features: UL RECOGNIZED;
ACSL-6300-00TE
Broadcom's ACSL-6300-00TE is a 3-channel logic IC output optocoupler with separate configuration. It operates at -40 to 100 °C, has 2500V isolation voltage, and supports a data rate of 15 MBps. Ideal for applications requiring high-speed signal transmission in harsh environments.
ACSL-6300-50TE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 3; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns;
ACSL-6410-06TE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Nominal Data Rate: 15 MBps; Maximum On State Current: .05 A;
ACSL-6410-50TE
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: TTL COMPATIBLE, UL RECOGNIZED; Maximum Isolation Voltage: 2500 V;
ACSL-6310-56T
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Nominal Supply Voltage: 5.5 V; Nominal Response Time: 100 ns;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved