Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACPL-K370-500E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 2V to 18V. It operates in industrial temperature grades from -40°C to 105°C, making it suitable for various applications requiring small outline packages and surface mount capabilities. The package body material is plastic/epoxy, with a rectangular shape and gull wing terminals on a 1.27mm pitch.
Median Price
$5.075
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$4.990
100+ parts
$2.962
1k+ parts
$2.525
10k+ parts
$2.388
Mouser Electronics
$5.160
$3.000
$2.540
$2.420
Vyrian
$2.310
-
Digiode
$4.807
VNN
Chip Stock
Nova Conductors
Ampacity Inc.
$1.960
Decca Corp
$1.921
$1.902
Corphita
$4.554
A-Z Elektronik GmbH
Argo Parts USA
Alle Elektronik GmbH
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
Continental Prestige Electronics
Supply Digital
Aranea Global
Plastic/Epoxy material is durable and provides good protection for the internal components of the semiconductor, making it a reliable choice for long-term use.
Surface mount capability makes installation easy and provides flexibility in placement and connection within electronic circuits.
3.3V supply voltage is a commonly used standard in many electronic devices, ensuring compatibility and ease of integration.
With a maximum operating temperature of 105°C, this semiconductor can withstand high heat environments, making it suitable for industrial applications.
Tin terminal finish provides good conductivity and corrosion resistance, ensuring stable performance and longevity of the semiconductor.
Gull wing terminal form allows for easy soldering and secure attachment to circuit boards, enhancing the overall reliability of the product.
Other Function Semiconductors ACPL-K370-500E attributes and parameters. Explore more Other Function Semiconductors devices from Broadcom
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
ACPL-K370-500E Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Molding Chg 08/Feb/2016 Mult Device Design Changes 10/Nov/2015
PCN Packaging - Marking/Labeling Revision B 14/Jan/2014 Multiple Devices Marking/Labeling 07/Aug/2013
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Daco Semiconductor
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Telefunken Microelectronics
LT4363IS-2#PBF
Analog Devices
LT4363IS-2#PBF by Analog Devices is a small outline, surface mount IC with 16 terminals. It operates at a nominal voltage of 12V and has a max operating temperature of 85°C. This industrial-grade device is commonly used in applications requiring protection against overvoltage and reverse polarity.
G40
Emco High Voltage
Other Semiconductors; Temperature Grade: COMMERCIAL; No. of Terminals: 4; Package Style (Meter): MICROELECTRONIC ASSEMBLY; Qualification: Not Qualified; Maximum Output Current: .00037 A;
ADXL327BCPZ-RL7
ADXL327BCPZ-RL7 by Analog Devices is a 16-terminal chip carrier with a supply voltage of 1.8V to 3.6V, operating b/w -40°C to 85°C. This industrial-grade accelerometer IC in square shape and plastic/epoxy material is surface-mountable and suitable for various analog circuit applications requiring precise motion sensing capabilities.
ACPL-C87BT-500E
Broadcom
Broadcom's ACPL-C87BT-500E is an 8-terminal analog circuit IC with a supply voltage range of 4.5V to 5.5V, suitable for automotive applications. It features a small outline package style, dual terminal position, and can operate in temperatures ranging from -40°C to 125°C.
VIPER26HD
STMicroelectronics
VIPER26HD by STMicroelectronics is a current-mode control IC with 16 terminals, operating at a max switching frequency of 127 kHz. It has a nominal voltage range from 11.5V to 23.5V and is ideal for applications requiring analog circuitry in small outline packages.
ADS131A04IPBS
ADS131A04IPBS by Texas Instruments is a 32-terminal analog circuit IC with 4 channels, operating at -40 to 125°C. It features a nominal voltage of 3.3V, suitable for automotive applications due to its thin profile and fine pitch package style. With a terminal finish of Ni/Pd/Au, it offers high performance in a compact square shape design.
PGA309AIPWR
PGA309AIPWR by Texas Instruments is a 16-terminal analog circuit IC with a supply voltage range of 2.7V to 5V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for various applications requiring precise signal processing and control in compact spaces. The small outline package with gull wing terminals and shrink pitch design ensures easy surface-mount installation in electronic devices.
QT60168-ASG
Atmel
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE; Surface Mount: YES;
LM334M/NOPB
National Semiconductor
ANALOG CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CSLA2DGI
Honeywell Sensing And Control
CSLA2DGI by Honeywell Sensing And Control is an ANALOG CIRCUIT with 3 terminals, Vsup range of 6-12V, and temp range of -25 to 85°C. Ideal for applications requiring SPECIAL SHAPE package style in various electronic systems.
MAX31855JASA+
MAX31855JASA+ by Analog Devices is a small outline IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 3-3.6V and consumes up to 1.5mA. Ideal for automotive applications due to its surface mount design and high temperature grade.
LT4363IMS-2#PBF
Linear Technology
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LIS2HH12TR
LIS2HH12TR by STMicroelectronics is a square-shaped, surface-mountable sensor with 12 terminals and a nominal voltage of 2.5V. It operates in industrial temperature range (-40 to 85°C) and has a very thin profile (1mm height). This analog circuit IC is suitable for applications requiring precise motion sensing in compact electronic devices.
LT1025CN8#PBF
LT1025CN8#PBF by Analog Devices is an 8-terminal IC with a supply voltage range of 4-36V. It operates b/w 0-70°C and has a peak reflow temperature of 260°C. This analog circuit in-line package is ideal for commercial applications requiring precise temperature sensing and control.
EMC2305-1-AP-TR
Microchip Technology
EMC2305-1-AP-TR by Microchip Technology is a 16-terminal chip carrier with a nominal voltage of 3.3V, suitable for automotive applications. It operates b/w -40 to 125°C, has a max switching frequency of 400 kHz, and features pulse width modulation control technique.
LTC4311IDC#TRPBF
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
MC3630
Mcube
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFLGA; Package Shape: SQUARE; Surface Mount: YES;
EMC2303-1-KP-TR
EMC2303-1-KP-TR by Microchip Technology is a 12-terminal IC with a 3.3V nominal voltage, suitable for automotive applications. It features a max operating temperature of 125°C, pulse width modulation control technique, and push-pull switcher configuration. With a compact square package style and surface-mount capability, it offers precise thermal management in tight spaces.
TDE1707BFP
ANALOG CIRCUIT; Moisture Sensitivity Level (MSL): 3; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
LSM6DS3USTR
STMicroelectronics LSM6DS3USTR is a 14-terminal IC with 1.8V nominal voltage, suitable for industrial applications. It features a very thin profile and fine pitch package style, operating b/w -40 to 85 °C. Ideal for analog circuits, this sensor offers precise motion tracking in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACPL-C87B-500E
ACPL-C87B-500E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 3V to 5.5V. It operates in industrial temperature grades from -40°C to 105°C, making it suitable for various applications requiring precise signal processing and control functions. This rectangular, small outline package with gull wing terminals is designed for surface mount assembly, offering a compact solution for electronic systems.
ACPL-C87B-000E
ACPL-C87B-000E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 3V to 5.5V, suitable for industrial applications. It features a small outline package style, gull wing terminal form, and operates in temperatures ranging from -40°C to 105°C. This surface-mount device has a rectangular shape and measures 6.807mm x 5.85mm in length and width respectively.
ACPL-C87BT-000E
ACPL-C87BT-000E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 4.5V to 5.5V, suitable for automotive applications. It features a small outline package style, gull wing terminal form, and operates b/w -40°C to 125°C temperature range.
ACPL-C87A-000E
ACPL-C87A-000E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 3V to 5.5V. It operates in industrial temperature grades from -40°C to 105°C, making it suitable for various applications requiring precise signal processing and control functions. This small outline package with gull wing terminals is designed for surface mount assembly, offering reliability and performance in compact electronic devices.
ACPL-C87A-500E
ACPL-C87A-500E by Broadcom is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 105°C. It features a small outline package style, gull wing terminal form, and is suitable for industrial applications requiring analog circuit functionality.
ACPL-C87AT-500E
Broadcom's ACPL-C87AT-500E is an 8-terminal IC with a supply voltage range of 4.5V to 5.5V, suitable for automotive applications. With a small outline package style and gull wing terminal form, it operates in temperatures from -40°C to 125°C, making it ideal for analog circuit functions.
ACPL-C870-000E
ACPL-C870-000E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 3V to 5.5V. It operates in industrial temperature grades from -40°C to 105°C, making it suitable for various applications requiring precise signal processing and control functions. This small outline package with gull wing terminals is surface-mountable and features a rectangular shape, ideal for compact electronic designs.
ACPL-C87AT-000E
Broadcom's ACPL-C87AT-000E is an 8-terminal analog circuit IC with a supply voltage range of 4.5V to 5.5V, suitable for automotive applications. It features a small outline package style, surface mount capability, and operates in temperatures ranging from -40°C to 125°C.
ACPL-C870-500E
ACPL-C870-500E by Broadcom is an 8-terminal analog circuit IC with a supply voltage range of 3V to 5.5V. It operates in industrial temperature grades from -40°C to 105°C, making it suitable for various applications requiring precise signal processing and control within compact electronic devices. This small outline package with gull wing terminals is designed for surface mount assembly, offering reliability and performance in diverse electronic systems.
ACPL-785J-000E
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ACPL-K376-000E
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ACPL-K376-560E
ACPL-K370-000E
ACPL-0873-500E
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ACPL-K376-500E
ACPL-785J-060E
ACPL-K370-060E
ACPL-0873T-500E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved