Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRP5030T-5R6M is a shielded SMT inductor with 5.6uH nominal inductance, 4.25A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and powdered iron core material.
Median Price
$0.777
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.000
100+ parts
$0.654
1k+ parts
$0.512
10k+ parts
-
DigiKey
$0.674
$0.555
Newark
$1.140
$0.797
$0.706
Arrow
$0.425
Verical
TTI Europe
$0.366
Master Electronics
$0.439
$0.402
Farnell
$0.670
$0.612
Element14
$1.050
$0.692
$0.604
Nova Conductors
$0.641
Vyrian
Chip Stock
IBS Electronics
$0.711
$0.633
Ampacity Inc.
$0.190
Continental Prestige Electronics
$1.030
$0.616
$0.593
$0.570
Perfect Parts
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Netroflash
$0.629
$0.609
$0.597
Surface mount technology makes it easy to mount the inductor directly onto a PCB, saving space and simplifying assembly.
Shielding helps to reduce electromagnetic interference, ensuring better performance and reliability in electronic circuits.
Dual-ended terminal placement allows for flexibility in circuit design and facilitates efficient current flow.
The inductor's performance is tested at a frequency of 0.1 MHz, ensuring accurate and consistent results.
The 2220 size code indicates a standard package size, making it compatible with a wide range of applications.
The rectangular construction offers a compact design, making it suitable for space-constrained environments.
Designed for power applications, this inductor can handle high currents and voltages efficiently.
With a maximum operating temperature of 125°C, this inductor can withstand elevated temperatures without compromising performance.
The 5.6 microhenry nominal inductance value is suitable for various electronic applications, providing the right amount of inductance.
With a maximum rated current of 4.25 amperes, this inductor can handle high current loads without overheating.
Fixed Inductors SRP5030T-5R6M attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SRP5030T-5R6M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
5204
Frontier Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Shape: FLEXIBLE LEAD;
IHLP5050FDER1R0M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Test Frequency: .1 MHz;
B82479A1333M000
TDK
B82479A1333M000 by TDK is a surface mount fixed inductor with a nominal inductance of 33 uH and max rated current of 3 A. It is a general purpose inductor suitable for power applications, with a temperature range from -55 to 150 °C.
XAL6060-682MEC
Coilcraft
Coilcraft XAL6060-682MEC is a shielded, surface mount inductor with 6.8uH nominal inductance and 9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 18MHz.
46104C
C&d Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Tolerance: 20 %;
SRR1280-101M
Bourns
The Bourns SRR1280-101M is a shielded, surface mount inductor with 100uH nominal inductance. It has a max rated current of 2.1A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
IHLP2020BZER2R2M01
Vishay Intertechnology
Vishay Intertechnology's IHLP2020BZER2R2M01 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 4.2A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C and features a self-resonance frequency of 39MHz.
SRN6045-101M
Bourns SRN6045-101M is a shielded, surface mount fixed inductor with 100uH nominal inductance. Ideal for power applications, it has a max rated current of 0.7A and operates b/w -40 to 125°C. With a self-resonance frequency of 5MHz and DC resistance of 0.494 ohm, this general purpose inductor is constructed using ferrite material in a rectangular package measuring 6x6x4.5mm.
DRA124-4R7-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
CTX100-5-52M-R
Eaton Corporation
The Eaton Corporation CTX100-5-52M-R is a fixed inductor with 100uH nominal inductance, 8.2A max current, and -40 to 75°C operating temp range. Ideal for power applications, it features radial terminals, iron core material, and a toroidal package style for efficient vertical mounting.
IDCP2218ER101M
Vishay Intertechnology's IDCP2218ER101M is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for high current applications, this general purpose inductor features a ferrite core and operates b/w -40°C to 125°C.
IHLP2020CZER2R2M01
The Vishay Intertechnology IHLP2020CZER2R2M01 is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 5.8 A. It is designed for high current applications and has a compact rectangular package size of 2020, making it suitable for various electronic devices.
Vishay Intertechnology's IHLP5050FDER1R0M01 is a shielded SMT inductor with 1uH nominal inductance, 32A max current, and -55 to 125°C operating range. Ideal for power applications due to its general purpose design and composite core material.
CLF6045NIT-100M-D
The TDK CLF6045NIT-100M-D is a shielded, surface mount fixed inductor with 10uH nominal inductance and 2.6A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.035 ohm and operates b/w -55°C to 150°C temperature range.
SDE0604A-101K
Bourns SDE0604A-101K is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. Ideal for power applications, it has a max rated current of 0.8A and operates b/w -40 to 125°C. Its ferrite core material ensures high performance in a compact rectangular package.
SDR0604-220YL
Bourns SDR0604-220YL is a surface mount fixed inductor with 22uH nominal inductance, 1.1A max current, and 125°C max operating temp. Ideal for power applications due to its cylindrical shape, ferrite core material, and general purpose design.
CTX100-1-52LP-R
CTX100-1-52LP-R by Eaton Corp is a fixed inductor with 100uH nominal inductance, 2.5A max current, and -40 to 75°C operating range. Ideal for power applications, it features radial terminals, iron core material, and cylindrical toroidal package style.
DRA74-102-R
DRA74-102-R by Eaton Corp is a shielded fixed inductor with 1000uH nominal inductance, 4.19 ohm DC resistance, and 0.292A max rated current. Ideal for general purpose applications requiring a compact SMT package with high temperature tolerance (-40 to 165°C).
IHLP6767DZER470M11
Vishay Intertechnology's IHLP6767DZER470M11 is a shielded, high current inductor with 47uH nominal inductance and 5A max rated current. Ideal for general purpose applications, this SMT inductor features dual-ended terminals, matte tin over nickel finish, and operates b/w -55°C to 125°C.
DR125-101-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRP5030T-4R7M
Bourns SRP5030T-4R7M is a shielded SMT inductor with 4.7uH nominal inductance, 125°C max temp, and 4.6A max current rating. Ideal for power applications due to its general purpose design and powdered iron core material.
SRP5030T-100M
SRP5015TA-R47M
The Bourns SRP5015TA-R47M is a surface mount, shielded fixed inductor with a nominal inductance of 0.47 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 8 A and a self-resonance frequency of 110 MHz.
SRP5030CA-3R3M
SRP5030CA-1R0M
Bourns SRP5030CA-1R0M is a shielded, surface mount fixed inductor with 1uH nominal inductance and 12.2A max rated current. Ideal for power applications, it operates b/w -55°C to 155°C, featuring a self-resonance frequency of 50MHz.
SRP5030TA-1R5M
SRP5030T-6R8M
SRP5030TA-100M
SRP5050FA-150M1
Bourns SRP5050FA-150M1 is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 4A and operates b/w -55°C to 155°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 9MHz and DC resistance of 0.066 ohm.
SRP5030CA-1R8M
SRP5050FA-8R2M
Bourns SRP5050FA-8R2M is a shielded SMT inductor with 8.2uH nominal inductance, 6.1A max current, and -55 to 155°C operating range. Ideal for power applications due to its general purpose design and AEC-Q200 standard compliance.
SRP5020C-R33M
Bourns SRP5020C-R33M is a shielded, surface mount inductor with 0.33uH nominal inductance and 14A max rated current. Ideal for power applications, it features a self-resonance frequency of 86MHz and operates b/w -40°C to 125°C.
SRP5030TA-2R2M
SRP5030CA-2R2M
SRP5015TA-8R2M
SRP5030T-3R3M
SRP5015TA-220M
SRP5015TA-R68M
SRP5020C-2R2M
SRP5030TA-3R3M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved