Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
$1.865
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Newark
1+ parts
$0.978
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.410
$1.710
DigiKey
$2.420
$1.678
$1.423
$1.195
Mouser Electronics
$1.560
$1.320
$1.190
Distrelec
$2.913
Master Electronics
$1.270
$1.110
TTI
$1.290
$1.150
Farnell
$2.000
$1.830
Element14
$3.120
$3.080
Verical
$1.568
$1.411
Arrow
$1.201
RS (Exports)
$1.730
$1.660
Electro Sonic
$1.610
Cogito LLC
LIBRA Elektronik GmbH
Elcom Components
Nova Conductors
Perfect Parts
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Kepictronics
Aranea Global
Variable Resistors PVG5A104C03R00 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
PVG5A104C03R00 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SPC TECHNOLOGY/ MULTICOMP
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
P11S3F0CCRZ10503KA
POTENTIOMETER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
RK27112A00CC
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3223W-1-502E
Bourns
Bourns 3223W-1-502E is a linear trimmer resistor with 11 turns and 5000 ohm resistance. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a power dissipation of 0.125 W and voltage rating of 200 V, it is ideal for surface mount designs needing high precision.
3386P-1-103TLF
Bourns 3386P-1-103TLF is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it features a linear law of resistance and operates b/w -55 to 125 °C temperatures.
67WR1KLF
Tt Electronics Plc
67WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns and linear resistance law. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
RJS5K0E
Ohmite Manufacturing
The Ohmite Manufacturing RJS5K0E is a 5000 ohm linear wire wound potentiometer with 10% tolerance and 50W power dissipation. It features a circular package, panel mount style, and shaft actuator for precise control in various applications such as industrial machinery and electronic equipment.
23AR50KLFTR
23AR50KLFTR by Tt Electronics Plc is a CERMET variable resistor with a resistance of 50000 ohm and linear law. It has an operating voltage of 200V, rated power dissipation of 0.25W, and temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
23ESA104MMF50NF
TE Connectivity
TE Connectivity's 23ESA104MMF50NF is a linear carbon film potentiometer with 100k ohm resistance, 20% tolerance, and 0.4W power dissipation. It has a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise voltage control in electronic circuits.
3386W-1-104LF
Bourns 3386W-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3006P-7-202LF
Bourns 3006P-7-202LF is a linear trimmer pot with 2000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
14910F0GJSX10502KA
Vishay Intertechnology's 14910F0GJSX10502KA is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PCB mount applications, it operates b/w -40 to 125 °C with a temperature coefficient of 150 ppm/°C.
89PR50KLFTB
89PR50KLFTB by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, 20 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and rated power dissipation of 0.75 W.
3314J-1-103G
Bourns 3314J-1-103G is a CERMET variable resistor with 10000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
TC33X-2-104E
Bourns TC33X-2-104E is a linear trimmer resistor with 100k ohm resistance, 25% tolerance, and 0.15W power dissipation. It operates b/w -40 to 100°C, suitable for applications requiring precise resistance adjustments in compact SMT designs at up to 50V voltage.
3299X-1-204LF
Bourns 3299X-1-204LF is a CERMET trimmer pot with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for PCB mounting applications requiring precise resistance adjustments.
3299Y-1-101LF
Bourns 3299Y-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a max voltage of 300 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
7286R5KL.25
7286R5KL.25 by Tt Electronics Plc is a 5000 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. It has a rated power dissipation of 2W, operates b/w -55 to 125 °C, and features a shaft actuator for precise control. Ideal for applications requiring accurate resistance adjustments in electronic circuits.
CMU1511E
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
3299Y-1-254
Bourns 3299Y-1-254 is a CERMET trimmer pot with 25 turns, 250k ohm resistance, and linear law. It has a PCB mount package style and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
ST-2TA102
Nidec Copal Electronics
ST-2TA102 by Nidec Copal Electronics is a 1000 ohm linear trimmer resistor with 3 terminals. It operates b/w -55 to 125 °C and has a tolerance of 20%. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PVG5A103C03R00
Murata Manufacturing
PVG5A103C03R00 by Murata is a 11-turn linear variable resistor with a resistance of 10000 ohm. It has a rated temperature of 70°C and can operate at voltages up to 300V. This trimmer resistor is commonly used in surface mount applications requiring precise resistance adjustments.
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PVG5A202C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PVG5A102C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PVG5A104C03R00
PVG5A104C03R00 by Murata: 11-turn linear trimmer resistor with 100k ohm resistance, 10% tolerance, and 3960° rotation angle. Ideal for surface mount applications in electronics for precise voltage adjustments. Operating range from -55 to 125 °C with a rated power of 0.25 W.
PVG5A204C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PVG5A203C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Murata Manufacturing's PVG5A203C03R00 is a 20000 ohm linear trimmer resistor with 11 turns and 10% tolerance. It operates b/w -55 to 125 °C, has a power dissipation of 0.25 W, and can handle up to 300 V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
PVG5A502C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Murata Manufacturing's PVG5A502C03R00 is a 5000 ohm linear potentiometer with 11 turns and 3960° rotation angle. It operates b/w -55 to 125 °C, has a tolerance of 10%, and can handle up to 300V. This SMT resistor is ideal for applications requiring precise voltage control in compact spaces.
PVG5A504C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PVG5H502C03R00
PVG5H102C03B00
PVG5A104C03B00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved