Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 55 Cel; Tolerance: 20 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors PTS01-12L-103C6 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Law Of Resistance:
Resistor Type:
Terminal Shape:
Tolerance:
PTS01-12L-103C6 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
General Semiconductor
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infinex
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
RRS1K0
Ohmite Manufacturing
Ohmite Manufacturing's RRS1K0 is a 500W POTENTIOMETER with LINEAR Law Of Resistance. It features HORIZONTAL Actuator orientation, WIRE WOUND technology, and 10% Tolerance. Ideal for applications requiring precise resistance adjustment in panel mount setups.
RV4NAYSD501A
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
3856H282502A
Bourns
Bourns 3856H282502A is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. Linear construction, chassis mount package style make it ideal for applications requiring precise resistance adjustments in a temperature range of -65 to 125 °C.
RK09L12B0A1V
Alps Alpine
Alps Alpine RK09L12B0A1V is a logarithmic potentiometer with 10000 ohm resistance, 20% tolerance, and 10 V operating voltage. It is used in PCB mount applications for audio equipment due to its shaft actuator type and 300° rotation angle.
RT100AS10R0KB
Vishay Intertechnology
Vishay Intertechnology's RT100AS10R0KB is a 10 ohm wire wound POTENTIOMETER with 100 W power dissipation. Ideal for panel mount applications, it has a wide operating temperature range from -55 to 320 °C and can handle up to 31.6 V operating voltage.
3214X-1-103E
Bourns 3214X-1-103E is a linear trimmer pot with 5 turns, 10000 ohm resistance, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in compact SMT packages. Operating voltage of 300V, temperature range from -65 to 150 °C, and rated power dissipation of 0.25W make it versatile for various electronic circuits.
P0915N-FC15AR10K
Tt Electronics Plc
P0915N-FC15AR10K by Tt Electronics Plc is a 10000 ohm POTENTIOMETER with CONDUCTIVE PLASTIC tech, AUDIO law of resistance, and 20% tolerance. It has HORIZONTAL orientation, SHAFT actuator type, and PANEL mounting for applications in PCBs requiring precise resistance adjustments.
5150500311
TE Connectivity
TE Connectivity's 5150500311 is a linear carbon film potentiometer with 100k ohm resistance, 3 terminals, and thumb wheel actuator. It has a tolerance of 20% and rated power dissipation of 0.2W. Ideal for applications requiring precise voltage control in through hole mounting setups.
3006Y-1-502LF
The Bourns 3006Y-1-502LF is a CERMET trimmer pot with 5000 ohm resistance, 15 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
3314J-1-103G
Bourns 3314J-1-103G is a CERMET variable resistor with 10000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
3306K-1-503
Bourns 3306K-1-503 is a CERMET trimmer resistor with 50k ohm resistance, 25% tolerance, and 0.2W power dissipation. It operates b/w -25°C to 100°C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The linear law of resistance and screw actuator make it ideal for fine-tuning circuits with a wide operating voltage range up to 100V.
89PHR50LF
89PHR50LF by Tt Electronics Plc is a linear trimmer resistor with 50 ohm resistance, rated for 0.75W power dissipation and 20% tolerance. It features CERMET technology, operates b/w -55 to 125 °C, and has a max voltage of 200V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
534B1103JC
Vishay Intertechnology's 534B1103JC is a wire wound potentiometer with 10 turns and linear resistance law. It has a resistance of 10000 ohm, rated power dissipation of 2W, and operates b/w -55 to 125 °C. Ideal for applications requiring precise voltage control in industrial machinery and electronic equipment.
3382G-2-103G
Variable Resistors;
PE30L0FG473KAB
Vishay Intertechnology's PE30L0FG473KAB is a CERMET POTENTIOMETER with 10% tolerance, 1.91W power dissipation, and 270° rotation angle. It operates b/w -55 to 125 °C and has a linear resistance law. Ideal for panel mount applications in electronic circuits requiring precise voltage control.
72RXR100LF
72RXR100LF by Tt Electronics Plc is a CERMET trimmer pot with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -55 to 125 °C. The linear law of resistance and screw actuator make it ideal for precise adjustments in electronic circuits.
3386F-1-103LF
Bourns 3386F-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for precise voltage adjustments due to its linear resistance law and 280° rotation angle.
TC73W-1-203E
Bourns TC73W-1-203E is a SMT POTENTIOMETER with 20000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
PT10LV10-103A2020-S
Piher Sensors And Controls Sa
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3296X-1-103LF
Bourns 3296X-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved