Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Advanced Electronics
1+ parts
$1.521
100+ parts
$1.384
1k+ parts
$1.247
10k+ parts
Data Line Filters MH3225-650Y attributes and parameters. Explore more Data Line Filters devices from Bourns
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MH3225-650Y Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Good-ark Electronics
Sensitron Semiconductor
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
BLM31SN500SN1L
Murata Manufacturing
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
2773021447
Fair-rite Products
Fair-rite Products' 2773021447 is a FERRITE BEAD filter with 2 terminals, matte tin finish, and 70 OHM impedance. Ideal for data line filtering in surface mount applications due to its compact dimensions of L9.6XB3.05XH2.85 mm.
BLM18PG471SN1J
Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.
7427512
Wuerth Elektronik & Kg
Wurth Elektronik 7427512 is a chip bead data line filter with 3 functions. It operates b/w -40 to 125°C, has an output impedance of 580Ω, and rated current of 5A. Used in surface mount applications for filtering frequencies from 25-100MHz in electronic circuits.
DSS1NB32A103Q91A
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
74279228260
Wurth Elektronik's 74279228260 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C, DC resistance of 0.008 ohm, and output impedance of 26Ω. Ideal for applications requiring surface mount filters with a rated current of 6.5A.
50105C
C&d Technologies
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;
MCZ1210AH900L2TA0G
MCZ1210AH900L2TA0G by TDK is a 4-terminal data line filter with 10 Mohm insulation resistance and 5V rated voltage. With a max operating temperature of 85°C, it is ideal for applications requiring high output impedance such as data transmission systems.
74270044
Wurth Elektronik 74270044 is a FERRITE BEAD Data Line Filter with 451 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, and it has a diameter of 15.85 mm. Ideal for applications requiring noise suppression in electronic circuits.
74279252
Wurth Elektronik 74279252 is a multi-layer ferrite chip filter with AEC-Q200 screening. With dimensions of L4.5XB3.2XH1.5 (mm), it operates b/w -55 to 125 °C, suitable for data line filtering in automotive applications at frequencies ranging from 100 MHz to 108 MHz.
BLM18AG601SH1D
Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.
BLM21BB121SN1D
Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
EMIF06-MSD02N16
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
7448263505
7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.
BLM15PX330SN1D
Murata Manufacturing's BLM15PX330SN1D is a FERRITE CHIP data line filter with 33 OHM output impedance, 1.7A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
MPZ1005S121CTD25
TDK's MPZ1005S121CTD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.09 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
NFM41PC155B1H3L
Murata Manufacturing's NFM41PC155B1H3L is a FERRITE CHIP data line filter with 100 Mohm insulation resistance, 50V rated voltage, and 6A rated current. It operates b/w -55°C to 85°C, measures L4.5xB1.6xH1.0 mm, and has a max DC resistance of 0.009 ohm. Ideal for surface mount applications requiring high capacitance filtering capabilities.
MI0603L301R-10
Laird Technologies
MI0603L301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L1.6XB.8XH.8 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.1 ohm and can handle up to 2 A rated current.
DLW31SN601SQ2L
Murata Manufacturing's DLW31SN601SQ2L is a Data Line Filter with 2 functions, rated at 50V. It has a min insulation resistance of 10 Mohm and max operating temperature of 85°C. Ideal for applications requiring filtering in data lines, it features dimensions of L3.2xB1.6xH1.9mm and output impedance of 600 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved